Looking for lift link bushing (P/N 521425 R1)

Hi,
You didn't say what the bushing is for. I see it is for the lift rod on a LoBoy Fast Hitch. It is sort of a spacer.
Below is a page from the Cub and LoBoy parts manual showing the bushing, it is number 2 in the picture.
https://farmallcub.club/rudi/farmal...7F Revision 3/Group 09 - Frame/Page 09-10.jpg

It is a different part number than the bushing for the Cub, so I guess something about it is different than a Cub bushing.
Someone that has a LoBoy with a Fast Hitch could measure the length and the OD of it, and you could make one.
 
The lift rod on a Lo-Boy is bigger diameter than the one on a Farmall. The Lo-Boy part has to slip over a 7/8 shaft, the Farmall 3/4. I quick measure of parts on tractors seems to indicate the other dimensions are about the same: OD 1-5/16, length 1-1/2. You might be able to find something that would work in the hitch equipment section of a farm supply store (bushings to adapt 3-point categories). If you want the real thing, Parts Depot has some NOS on hand. Go through a local dealer that works with the Depot.
 
Glen said:
Hi,
You didn't say what the bushing is for. I see it is for the lift rod on a LoBoy Fast Hitch. It is sort of a spacer.
Below is a page from the Cub and LoBoy parts manual showing the bushing, it is number 2 in the picture.
https://farmallcub.club/rudi/farmallcub.com/rudi_cub/www.cleancomputes.com/Cub/Cub Parts Manuals/TC-37F Revision 3/Group 09 - Frame/Page 09-10.jpg

It is a different part number than the bushing for the Cub, so I guess something about it is different than a Cub bushing.
Someone that has a LoBoy with a Fast Hitch could measure the length and the OD of it, and you could make one.
Click to expand...
Wow, I sure hosed this up. The part I need is #4 in the picture (520 122 R1). They call it a trunnion bushing.
 
Last edited:
Jim Becker said:
A few years back, a member here made a batch of them. I no longer remember who did it.
Click to expand...
I can't remember either, but a few years ago, I believe he said he was going to quit selling/making them so I bought all that he had left at Rocky Mountain CubFest.
 
I purchased that bushing 11 years ago from Marion for my LoBoy and posted pictures. At the time Tim T. (tst) mentioned that he also had them. Now that you've identified the part, perhaps Tim will reply again, if he still has the part available. IMG_20260604_105256.jpgGood luck,
David
 
The thread...
D

Thread 'Fast Hitch Trunnion Bushing'

On the newly acquired ’55 LoBoy it was missing the trunnion bushing where the lift rod hooks to the Fast Hitch and I didn’t see where it was it was available anywhere. While at the Barnyard Bash Bill Hudson mentioned that he thought Marion Smith, a forum member, had made some and I should give him a call. Well, I did, and he did! Machined from 1018 steel, fit perfect and works like a champ! SO… if anyone is in the need of one, I suggest contacting Marion!
 
You must log in or register to reply here.
Back
Top