What happened at work today.

Anything that might not belong on the other message boards!

Moderator: Team Cub

User avatar
AL Farmall Boy
5+ Years
5+ Years
Posts: 2273
Joined: Tue Aug 10, 2010 6:38 pm
Zip Code: 35111
Circle of Safety: Y

Re: What happened at work today.

Postby AL Farmall Boy » Wed May 09, 2018 8:17 am

Shane Nelson wrote:Fired up the 2 Maytag engines, haven't cranked them in several months.
Single cylinder https://www.youtube.com/watch?v=3dM5wDMGAQs
Twin cylinder https://www.youtube.com/watch?v=lOVETwrKJWI
I think the single cylinder may have a bent crank, it dances all over the place but it runs. The twin doesn't move, it's always been one of the best running engines I've had. Owned them both for about 12 years.


Does it mean they have a bent crank when they dance around? We have 2 of the single cylinder Maytags that we bought at an estate sale of an old tractor guy. They were already painted up and in his shop with dust on them. Didn't take much for me to get them running. I know nothing about them really though. One is harder to start than the other.

IMG_9447.JPG


IMG_9446.JPG


That was a really good auction (outside of Nashville, TN) too. We ended up buying a Cub, Super A, (2) Allis Chalmers G tractors, and 2 trailer loads of attachments & parts for the Farmall and A-C tractors. Amongst the stuff we bought I found a notebook binder of forum posts printed out from Yesterdays Tractor. Thought it was pretty neat.
Regards,
Chase
205-368-5339
ihfarmallrtr@gmail.com

:tractor: Follow my page "Alabama Tractor Pickers" on YouTube & Facebook! :tractor:

User avatar
Shane Nelson
501 Club
501 Club
Posts: 3086
Joined: Wed Nov 22, 2017 6:24 am
Zip Code: 27284
Tractors Owned: .
1947 Circle Cub #1447 (Arnold)
195? Cub
1970 International 140 (Norman)
1949 John Deere A
1972 Schramm Pneumatractor
1993 Ford 4630 W/Loader
1965 John Deere 110
1961 Cub Cadet Original
Circle of Safety: Y
Location: Oak Ridge, N.C.

Re: What happened at work today.

Postby Shane Nelson » Wed May 09, 2018 8:20 am

Chase, I don't know if it means it's bent or not. I had another single cylinder on a Maytag washing machine and it didn't move, on or off the washer but this one always has.
God is good, all the time!
Every home is a school, what are you teaching?
Make prayer a 1st priority, instead of a last resort.
Circle of Safety

User avatar
AL Farmall Boy
5+ Years
5+ Years
Posts: 2273
Joined: Tue Aug 10, 2010 6:38 pm
Zip Code: 35111
Circle of Safety: Y

Re: What happened at work today.

Postby AL Farmall Boy » Wed May 09, 2018 9:09 am

Shane Nelson wrote:Chase, I don't know if it means it's bent or not. I had another single cylinder on a Maytag washing machine and it didn't move, on or off the washer but this one always has.


Yeah, these dance around just a little when moving. I was thinking it was from the vibration.

https://youtu.be/XAk3VPuiobI

https://youtu.be/tykwj351PBs
Regards,
Chase
205-368-5339
ihfarmallrtr@gmail.com

:tractor: Follow my page "Alabama Tractor Pickers" on YouTube & Facebook! :tractor:

User avatar
Shane Nelson
501 Club
501 Club
Posts: 3086
Joined: Wed Nov 22, 2017 6:24 am
Zip Code: 27284
Tractors Owned: .
1947 Circle Cub #1447 (Arnold)
195? Cub
1970 International 140 (Norman)
1949 John Deere A
1972 Schramm Pneumatractor
1993 Ford 4630 W/Loader
1965 John Deere 110
1961 Cub Cadet Original
Circle of Safety: Y
Location: Oak Ridge, N.C.

Re: What happened at work today.

Postby Shane Nelson » Wed May 09, 2018 9:13 am

AL Farmall Boy wrote:
Shane Nelson wrote:Chase, I don't know if it means it's bent or not. I had another single cylinder on a Maytag washing machine and it didn't move, on or off the washer but this one always has.


Yeah, these dance around just a little when moving. I was thinking it was from the vibration.

https://youtu.be/XAk3VPuiobI

https://youtu.be/tykwj351PBs

This single we have now wouldn't sit on the back of the truck while running.......for long.
God is good, all the time!
Every home is a school, what are you teaching?
Make prayer a 1st priority, instead of a last resort.
Circle of Safety

User avatar
AL Farmall Boy
5+ Years
5+ Years
Posts: 2273
Joined: Tue Aug 10, 2010 6:38 pm
Zip Code: 35111
Circle of Safety: Y

Re: What happened at work today.

Postby AL Farmall Boy » Wed May 09, 2018 9:25 am

[/quote]
This single we have now wouldn't sit on the back of the truck while running.......for long.[/quote]

I gotcha!
Regards,
Chase
205-368-5339
ihfarmallrtr@gmail.com

:tractor: Follow my page "Alabama Tractor Pickers" on YouTube & Facebook! :tractor:

User avatar
Shane Nelson
501 Club
501 Club
Posts: 3086
Joined: Wed Nov 22, 2017 6:24 am
Zip Code: 27284
Tractors Owned: .
1947 Circle Cub #1447 (Arnold)
195? Cub
1970 International 140 (Norman)
1949 John Deere A
1972 Schramm Pneumatractor
1993 Ford 4630 W/Loader
1965 John Deere 110
1961 Cub Cadet Original
Circle of Safety: Y
Location: Oak Ridge, N.C.

Re: What happened at work today.

Postby Shane Nelson » Fri May 11, 2018 6:24 pm

Got the spare tire carrier back from powdercoat and mounted it under the gooseneck to get it out of the weather. Didn’t feel like welding it so just bolted it.
Attachments
84F2A9EE-9484-407C-9614-1604D9FE537C.jpeg
44B529FE-0C6A-434E-BC45-45817A2F4B61.jpeg
56634135-4665-4FDE-AA47-ECB0B31843D6.jpeg
FA01D5B0-CEE8-40C9-BA2E-E7474232C3C9.jpeg
5D0A5792-A5AE-43B6-B0E6-17D7E2DDF9DB.jpeg
God is good, all the time!
Every home is a school, what are you teaching?
Make prayer a 1st priority, instead of a last resort.
Circle of Safety

Scrivet
5+ Years
5+ Years
Posts: 2687
Joined: Sun Apr 19, 2009 9:51 pm
Zip Code: 63664
Location: MO, Potosi

Re: What happened at work today.

Postby Scrivet » Fri May 11, 2018 9:41 pm

:worthy: That's a very clever idea! :worthy:
Curious why you went out the left side though? I would think if you were along a highway somewhere changing a tire, that would be the more dangerous side because of the traffic.

User avatar
Shane Nelson
501 Club
501 Club
Posts: 3086
Joined: Wed Nov 22, 2017 6:24 am
Zip Code: 27284
Tractors Owned: .
1947 Circle Cub #1447 (Arnold)
195? Cub
1970 International 140 (Norman)
1949 John Deere A
1972 Schramm Pneumatractor
1993 Ford 4630 W/Loader
1965 John Deere 110
1961 Cub Cadet Original
Circle of Safety: Y
Location: Oak Ridge, N.C.

Re: What happened at work today.

Postby Shane Nelson » Sat May 12, 2018 6:25 am

Scrivet wrote::worthy: That's a very clever idea! :worthy:
Curious why you went out the left side though? I would think if you were along a highway somewhere changing a tire, that would be the more dangerous side because of the traffic.

I didn’t think about putting it out the right side because of the road, learn from my mistake!
God is good, all the time!
Every home is a school, what are you teaching?
Make prayer a 1st priority, instead of a last resort.
Circle of Safety

User avatar
Shane Nelson
501 Club
501 Club
Posts: 3086
Joined: Wed Nov 22, 2017 6:24 am
Zip Code: 27284
Tractors Owned: .
1947 Circle Cub #1447 (Arnold)
195? Cub
1970 International 140 (Norman)
1949 John Deere A
1972 Schramm Pneumatractor
1993 Ford 4630 W/Loader
1965 John Deere 110
1961 Cub Cadet Original
Circle of Safety: Y
Location: Oak Ridge, N.C.

Re: What happened at work today.

Postby Shane Nelson » Mon May 14, 2018 11:43 am

Doing a little welding. Lot more to do.
Attachments
298EC00E-7F68-4AC7-9595-4C71F6C7E63D.jpeg
39ABDB35-35BE-4ACB-8A97-DE3EEF4FCDA2.jpeg
God is good, all the time!
Every home is a school, what are you teaching?
Make prayer a 1st priority, instead of a last resort.
Circle of Safety

User avatar
AL Farmall Boy
5+ Years
5+ Years
Posts: 2273
Joined: Tue Aug 10, 2010 6:38 pm
Zip Code: 35111
Circle of Safety: Y

Re: What happened at work today.

Postby AL Farmall Boy » Wed May 16, 2018 7:56 am

Pinned joint anchors? Gosh, I just worked a bunch of structural engineering problems yesterday on the FE exam dealing with those. I don't care to see that stuff again! haha. Looking very good though~!
Regards,
Chase
205-368-5339
ihfarmallrtr@gmail.com

:tractor: Follow my page "Alabama Tractor Pickers" on YouTube & Facebook! :tractor:

User avatar
Shane Nelson
501 Club
501 Club
Posts: 3086
Joined: Wed Nov 22, 2017 6:24 am
Zip Code: 27284
Tractors Owned: .
1947 Circle Cub #1447 (Arnold)
195? Cub
1970 International 140 (Norman)
1949 John Deere A
1972 Schramm Pneumatractor
1993 Ford 4630 W/Loader
1965 John Deere 110
1961 Cub Cadet Original
Circle of Safety: Y
Location: Oak Ridge, N.C.

Re: What happened at work today.

Postby Shane Nelson » Wed May 16, 2018 8:21 am

I don't know what they are for, customer made them but don't trust their welds so they brought them to us, lol.
God is good, all the time!
Every home is a school, what are you teaching?
Make prayer a 1st priority, instead of a last resort.
Circle of Safety

User avatar
Shane Nelson
501 Club
501 Club
Posts: 3086
Joined: Wed Nov 22, 2017 6:24 am
Zip Code: 27284
Tractors Owned: .
1947 Circle Cub #1447 (Arnold)
195? Cub
1970 International 140 (Norman)
1949 John Deere A
1972 Schramm Pneumatractor
1993 Ford 4630 W/Loader
1965 John Deere 110
1961 Cub Cadet Original
Circle of Safety: Y
Location: Oak Ridge, N.C.

Re: What happened at work today.

Postby Shane Nelson » Fri May 25, 2018 12:02 pm

Made 2 stainless pins for the hole digger I been redoing. These are normal size :lol:
Attachments
5C5BA92D-86AE-4801-AE12-E3C418DD42A1.jpeg
F1F469E3-5131-4949-AAB4-570E30C5BC70.jpeg
856E0405-C7C5-4E51-8365-57E2DD0BBEE5.jpeg
God is good, all the time!
Every home is a school, what are you teaching?
Make prayer a 1st priority, instead of a last resort.
Circle of Safety

User avatar
Shane Nelson
501 Club
501 Club
Posts: 3086
Joined: Wed Nov 22, 2017 6:24 am
Zip Code: 27284
Tractors Owned: .
1947 Circle Cub #1447 (Arnold)
195? Cub
1970 International 140 (Norman)
1949 John Deere A
1972 Schramm Pneumatractor
1993 Ford 4630 W/Loader
1965 John Deere 110
1961 Cub Cadet Original
Circle of Safety: Y
Location: Oak Ridge, N.C.

Re: What happened at work today.

Postby Shane Nelson » Tue May 29, 2018 9:29 am

Been messing with some fertilizer assembly parts. I bought this complete unit minus the hopper from a forum member and had to modify the bar that goes to the final because I have the old style handle on the FH. Decided to just make a new bar instead of hacking up an original one.
Attachments
0606F60B-E54E-4427-AC82-B5BBF1D35E22.jpeg
20BBE295-F479-4A31-8BEF-46D66BB69A92.jpeg
CA7DC75D-CB1E-4566-A273-7FE08E4AA509.jpeg
7C807E68-9D0F-4CB9-BB01-C8A9D50F0435.jpeg
God is good, all the time!
Every home is a school, what are you teaching?
Make prayer a 1st priority, instead of a last resort.
Circle of Safety

User avatar
Shane Nelson
501 Club
501 Club
Posts: 3086
Joined: Wed Nov 22, 2017 6:24 am
Zip Code: 27284
Tractors Owned: .
1947 Circle Cub #1447 (Arnold)
195? Cub
1970 International 140 (Norman)
1949 John Deere A
1972 Schramm Pneumatractor
1993 Ford 4630 W/Loader
1965 John Deere 110
1961 Cub Cadet Original
Circle of Safety: Y
Location: Oak Ridge, N.C.

Re: What happened at work today.

Postby Shane Nelson » Tue May 29, 2018 9:34 am

I’ve had this piece of a fertilizer assembly in the building for years and know it would cost more to complete it than it’s worth. I had a complete Cole fertilizer assembly for a Cub and I never did like it cause it was bulky and couldn’t see good with it on. Been wanting to find an IH one and sell that one. I put the Cole on Craigslist after buying the complete IH one and a man called me and said he had a piece of an IH one the hopper goes on and wanted to know if I’d take it on trade. Long story short we traded and I got my money back out of what I paid for the Cole 8 years ago. I had a gear, made the triangle piece and now got to come up with 2 idler gears and a bearing for the other end of the drive shaft and will have another complete unit minus the hopper.
Attachments
91C7E884-9C6C-4894-82AA-B0BE8EB60640.jpeg
96317DCA-DB71-4FCC-9290-C2BB44D09530.jpeg
0A40AEAD-1D94-413C-A5EA-FC21103F85A2.jpeg
9145CA77-4B56-4422-8864-D26BF53167CF.jpeg
7794433D-E7BC-42F9-A1F3-C754127D103F.jpeg
A644B1FE-9275-476E-B09A-C9E6F3F57F6F.jpeg
God is good, all the time!
Every home is a school, what are you teaching?
Make prayer a 1st priority, instead of a last resort.
Circle of Safety

User avatar
Shane Nelson
501 Club
501 Club
Posts: 3086
Joined: Wed Nov 22, 2017 6:24 am
Zip Code: 27284
Tractors Owned: .
1947 Circle Cub #1447 (Arnold)
195? Cub
1970 International 140 (Norman)
1949 John Deere A
1972 Schramm Pneumatractor
1993 Ford 4630 W/Loader
1965 John Deere 110
1961 Cub Cadet Original
Circle of Safety: Y
Location: Oak Ridge, N.C.

Re: What happened at work today.

Postby Shane Nelson » Tue May 29, 2018 6:02 pm

Turned the idler pulleys around and it clears. Can only adjust the handle 2 notches with it on but while the cultivators are on it don’t need adjusting much anyway.
Attachments
30A62083-966B-41B8-8E42-7444908C01AD.jpeg
0445DC17-22FD-40AD-B7A5-23E51A33A38A.jpeg
A5FEA80F-9C0C-4BA1-BB59-7285FAEC69F6.jpeg
God is good, all the time!
Every home is a school, what are you teaching?
Make prayer a 1st priority, instead of a last resort.
Circle of Safety


  • Similar Topics
    Replies
    Views
    Last post

Return to “Off Topic”

Who is online

Users browsing this forum: No registered users and 1 guest