Old Style Touch Contol BlockRebuild

Time saving tips to keep your Cub running smooth

Moderator: Team Cub

joey j
Posts: 11
Joined: Mon Jan 27, 2014 4:28 pm
Zip Code: 77429

Old Style Touch Contol BlockRebuild

Postby joey j » Fri Nov 21, 2014 11:53 am

I am rebuilding an old style touch control block Casting number 351686R1 on a 1948 Cub. The old style has some significant differences from the new style. I have searched this sight as best I could for a step by step repair complete with pics.like troop has done for the new style but cannot seem to find anything. Can anyone point me in the right direction? Otherwise I will document my rebuild and post it as I go.
Thanks,
Joey J.

joey j
Posts: 11
Joined: Mon Jan 27, 2014 4:28 pm
Zip Code: 77429

Re: Old Style Touch Contol BlockRebuild

Postby joey j » Sat Nov 29, 2014 10:51 pm

Slide01.jpg
Slide01.jpg (119.35 KiB) Viewed 1809 times
Slide03.jpg
Slide03.jpg (110.77 KiB) Viewed 1809 times
Slide04.jpg
Slide04.jpg (88.83 KiB) Viewed 1809 times
Slide05.jpg
Slide05.jpg (119.12 KiB) Viewed 1809 times
Slide06.jpg
Slide06.jpg (113.89 KiB) Viewed 1809 times
Slide02.jpg
Slide02.jpg (121.78 KiB) Viewed 1809 times

joey j
Posts: 11
Joined: Mon Jan 27, 2014 4:28 pm
Zip Code: 77429

Re: Old Style Touch Contol BlockRebuild

Postby joey j » Sat Nov 29, 2014 10:53 pm

Slide07.jpg
Slide07.jpg (102.13 KiB) Viewed 1809 times
Slide08.jpg
Slide08.jpg (97.87 KiB) Viewed 1809 times
Slide09.jpg
Slide09.jpg (114.97 KiB) Viewed 1809 times
Slide10.jpg
Slide10.jpg (93.25 KiB) Viewed 1809 times
Slide11.jpg
Slide11.jpg (66.71 KiB) Viewed 1809 times
Slide12.jpg
Slide12.jpg (309.15 KiB) Viewed 1690 times
Last edited by joey j on Sun Nov 30, 2014 4:17 pm, edited 1 time in total.

joey j
Posts: 11
Joined: Mon Jan 27, 2014 4:28 pm
Zip Code: 77429

Re: Old Style Touch Contol BlockRebuild

Postby joey j » Sat Nov 29, 2014 10:56 pm

Slide13.jpg
Slide13.jpg (102.32 KiB) Viewed 1809 times
Slide14.jpg
Slide14.jpg (157.69 KiB) Viewed 1809 times
Slide16.jpg
Slide16.jpg (161.21 KiB) Viewed 1809 times
Slide15.jpg
Slide15.jpg (157.86 KiB) Viewed 1809 times
Slide17.jpg
Slide17.jpg (177.06 KiB) Viewed 1809 times
Slide18.jpg
Slide18.jpg (176.26 KiB) Viewed 1809 times

joey j
Posts: 11
Joined: Mon Jan 27, 2014 4:28 pm
Zip Code: 77429

Re: Old Style Touch Contol BlockRebuild

Postby joey j » Sat Nov 29, 2014 10:58 pm

Slide19.jpg
Slide19.jpg (168.84 KiB) Viewed 1808 times
Slide20.jpg
Slide20.jpg (152.12 KiB) Viewed 1808 times
Slide21.jpg
Slide21.jpg (152.95 KiB) Viewed 1808 times
Slide22.jpg
Slide22.jpg (157.82 KiB) Viewed 1808 times
Slide23.jpg
Slide23.jpg (94.9 KiB) Viewed 1808 times
Slide24.jpg
Slide24.jpg (98.26 KiB) Viewed 1808 times

joey j
Posts: 11
Joined: Mon Jan 27, 2014 4:28 pm
Zip Code: 77429

Re: Old Style Touch Contol BlockRebuild

Postby joey j » Sat Nov 29, 2014 11:00 pm

Slide25.jpg
Slide25.jpg (49.29 KiB) Viewed 1808 times

User avatar
bob in CT
Team Cub Mentor
Team Cub Mentor
Posts: 6000
Joined: Thu Jun 07, 2007 9:34 am
Zip Code: 06040
Tractors Owned: 77 Cub (red); 74 Cub; 52 Cub; 50 Cub ( post-demo)
Circle of Safety: Y
Location: CT, Manchester

Re: Old Style Touch Contol BlockRebuild

Postby bob in CT » Mon Jul 13, 2015 7:09 am

I had to make one of the valve seat tools. I used some (7") of 1" x 3/16" bar stock I had in my bin and spent about 5 minutes on the "precision" grinding to make a 1/16" blade. I used a large adjustable wrench on the flat and had plenty of leverage.

Image

Image


  • Similar Topics
    Replies
    Views
    Last post

Return to “Engine, Clutch, Transmission and Hydraulics”

Who is online

Users browsing this forum: No registered users and 0 guests