how to fix broken plastic valve handle on portable air tanks

Any other helpful tips you may have.

Moderator: Team Cub

TrentonJ
5+ Years
5+ Years
Posts: 11
Joined: Thu Feb 14, 2013 8:00 am
Zip Code: 30041
Tractors Owned: 1949 Cub
1969 John Deere 1020
2006 Kuboto M5700

how to fix broken plastic valve handle on portable air tanks

Postby TrentonJ » Sat Nov 15, 2014 8:09 pm

If you have a portable air tank it likely has a manifold similar to the one pictured here with a red plastic valve handle. There is no need to buy a whole new manifold when the red plastic valve handle/wheel breaks.

portable_tank_manifold.jpg
red plastic valve handle prone to break off
portable_tank_manifold.jpg (13.26 KiB) Viewed 728 times



Cut a strip of leather about 1/4 inch wide and long enough to wrap around the valve stem. Cut a ring of nominal 1/2 inch diameter EMT (electrical metal tube - a type of electrical conduit) about 1/4 inch wide and debur it. Turn the valve to the off position. Now hold the leather in place with one side of the EMT ring and crimp the other end hard with a pair of adjustable long-handled pliers.

IMGP1285_smaller.JPG
the fix
IMGP1285_smaller.JPG (137.5 KiB) Viewed 728 times

User avatar
John *.?-!.* cub owner
Team Cub Guide
Team Cub Guide
Posts: 22852
Joined: Sun Feb 02, 2003 2:09 pm
Zip Code: 63664
Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
Location: Mo, Potosi

Re: how to fix broken plastic valve handle on portable air t

Postby John *.?-!.* cub owner » Sun Nov 16, 2014 2:17 pm

Pretty sharp idea, I have replaced a couple because of that over the years. Never was sharp enough to come up with your idea though.
If you are not part of the solution,
you are part of the problem!!!


  • Similar Topics
    Replies
    Views
    Last post

Return to “Miscellaneous Ideas”

Who is online

Users browsing this forum: No registered users and 1 guest