5 cent fix for overflow tube

Radiator, fan tips and other cooling ideas can be found here.

Moderators: Barnyard, Team Cub

bear32055
5+ Years
5+ Years
501 Club
501 Club
Posts: 792
Joined: Mon Nov 26, 2007 5:55 pm
Zip Code: 62258
Tractors Owned: 3-1955 FCubs serial numbers 191155,191156 and 191158
1958 fcub
Circle of Safety: Y
Location: IL,Mascoutah

5 cent fix for overflow tube

Postby bear32055 » Sun Dec 05, 2010 12:32 pm

All 3 of my Cubs have the overflow tube broken off and this may not be a correct police type fix it certainly worked and can be done with the hood on.Drilled a 9/64 hole in a 1/4 inch bolt and a jam nut on the outside of the neck.The bolt fits right in the broken tube and the threads help hold the tube in place.
Image
Image

User avatar
Barnyard
Team Cub
Team Cub
501 Club
501 Club
Posts: 19941
Joined: Tue Aug 07, 2007 3:39 pm
Zip Code: 45030
Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100
Circle of Safety: Y
Location: OH, New Haven (Hamilton County)

Re: 5 cent fix for overflow tube

Postby Barnyard » Sun Dec 05, 2010 4:22 pm

Just in case you are a butterfingers like I can be occassionally, you might want to slip a shop rag in the radiator opening just enough to keep a stray bolt from slipping from your fingers and falling in. Naturally you will want to remove the rag once the bolt is tightened. :)
It is common sense to take a method and try it. If it fails, admit it frankly and try another. But above all, try something.
- Franklin D. Roosevelt -

Circle of Safety

User avatar
challenger
5+ Years
5+ Years
501 Club
501 Club
Posts: 1086
Joined: Sun Apr 18, 2010 6:22 am
Zip Code: 21742
Tractors Owned: 1955 F Cub (2)
1952 F Cub
1948 F Cub
2155 JD
216 JD
Circle of Safety: Y
Location: Hagerstown MD

Re: 5 cent fix for overflow tube

Postby challenger » Thu Dec 09, 2010 6:42 pm

To eliminate possible galvanic corrision and seizure of the nut to the bolt, I suggest using a brass bolt and a brass nut.


Return to “Cooling”

Who is online

Users browsing this forum: No registered users and 0 guests