New Wall

Got a project that you are working on that is not a tractor? Maybe a barn to hold your tractors or just fun stuff like woodworking, glass, tools, sheds, gardens, custom implements, etc., this is the place to talk about it.

Moderator: Team Cub

User avatar
Barnyard
Team Cub
Team Cub
501 Club
501 Club
Posts: 19942
Joined: Tue Aug 07, 2007 3:39 pm
Zip Code: 45030
Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100
Circle of Safety: Y
Location: OH, New Haven (Hamilton County)

New Wall

Postby Barnyard » Tue Nov 20, 2012 9:38 pm

With the weather being nice around here for a few more days I thought I better get started on the wall I have been wanting to add to the shop so I can heat it this winter.

I took a peek inside the door and saw this! Yuck!!!
Image

So I started with this.
Image

And I put it here.
Image

Then I built another and put it on the other side of the post.
Image

All I have to do is insulate and sheet it as well as insulate the ceiling and install the furnace and I should be good to go this winter.

My first winter project better be a complete shop cleaning. :lol:
It is common sense to take a method and try it. If it fails, admit it frankly and try another. But above all, try something.
- Franklin D. Roosevelt -

Circle of Safety

User avatar
Rudi
Cub Pro
Cub Pro
501 Club
501 Club
Posts: 28707
Joined: Sun Feb 02, 2003 8:37 pm
Zip Code: E1A7J3
eBay ID: ve9rhs
Skype Name: R.H. "Rudi" Saueracker, SSM
Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger
Circle of Safety: Y
Twitter ID: Rudi Saueracker, SSM
Location: NB Dieppe, Canada

Re: New Wall

Postby Rudi » Tue Nov 20, 2012 10:26 pm

Nicely done Bill :D
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship


Gary Dotson
Team Cub Mentor
Team Cub Mentor
501 Club
501 Club
Posts: 2747
Joined: Thu Aug 03, 2006 6:20 am
Zip Code: 43358
Tractors Owned: 48 Cub Diesel (Cubota)
53 Cockshutt 20 restored (Shooter)
52 Cockshutt 20 unrestored
47 Leader "B" (Herckie)
49 Leader "D" (Princess)
49 Leader "D" very rough
48 Leader "D" unrestored
Kubota B6200E
Kubota B6200HST
Kubota B8200HST-D
Circle of Safety: Y
Location: OH West Mansfield

Re: New Wall

Postby Gary Dotson » Wed Nov 21, 2012 7:04 am

Glad to see you're getting around to it, Bill! Once you have a heat-able shop space, you'll wonder how you ever got along without it.

User avatar
Winfield Dave
5+ Years
5+ Years
501 Club
501 Club
Posts: 2898
Joined: Thu Apr 22, 2010 2:31 pm
Zip Code: 17953
Tractors Owned: ......Almost enough
Circle of Safety: Y
Location: PA, Middleport (Schuylkill County)

Re: New Wall

Postby Winfield Dave » Wed Nov 21, 2012 7:23 am

Good work Bill...I really like seeing progressive photos of a project.
Dave
"More gold has been mined from the thoughts of men than has been taken from the earth." -- Napoleon Hill

Jason (IL)
10+ Years
10+ Years
501 Club
501 Club
Posts: 906
Joined: Sun Feb 02, 2003 10:44 pm
Zip Code: 60936
Tractors Owned: 47 Cub SN 8664
48 Cub
50 Demo
54 Cub
55 Cub
2-56 Cub
55 LOBOY SN 876
57 LOBOY
2- 60 LOBOY
54 Super M
42 H
57 300LP
57 450
Cub Cadet 123
Cub Cadet 149
Circle of Safety: Y
Location: Gibson City, IL

Re: New Wall

Postby Jason (IL) » Wed Nov 21, 2012 8:07 am

The shop space looks full already, (like mine).

I am waiting for my furnace to get hooked up, then I will have a 24 x 40 shop with heat. Looking like a plan coming together, like that.

Good luck, now with heat, you'll be able to keep busy all winter.

User avatar
Boss Hog
Cub Pro
Cub Pro
501 Club
501 Club
Posts: 10192
Joined: Mon Oct 24, 2005 8:35 pm
Zip Code: 23962
eBay ID: dmb2613
Circle of Safety: Y
Location: VA. Randolph

Re: New Wall

Postby Boss Hog » Wed Nov 21, 2012 8:10 am

Looking good, but I would consider running the plywood the long way as it is stronger that way.
Boss
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg

User avatar
Barnyard
Team Cub
Team Cub
501 Club
501 Club
Posts: 19942
Joined: Tue Aug 07, 2007 3:39 pm
Zip Code: 45030
Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100
Circle of Safety: Y
Location: OH, New Haven (Hamilton County)

Re: New Wall

Postby Barnyard » Wed Nov 21, 2012 8:16 am

Boss Hog wrote:Looking good, but I would consider running the plywood the long way as it is stronger that way.
Boss

Do you mean stand it up?
It is common sense to take a method and try it. If it fails, admit it frankly and try another. But above all, try something.
- Franklin D. Roosevelt -

Circle of Safety

cub47
5+ Years
5+ Years

Re: New Wall

Postby cub47 » Wed Nov 21, 2012 9:06 am

Boss Hog wrote:Looking good, but I would consider running the plywood the long way as it is stronger that way.
Boss


Should not matter either way, I would be more concerned with getting the best yield out of your plywood sheeting and determine your vertical or horizontal mounting that way.

If you run it vertical you will have 16" spans of unsupported seams, whereas mounting horizontal as shown in your pics, will allow for a fully supported seam.

Of course that depends on whether you have the studs at 16 O.C.

Ike
10+ Years
10+ Years
Cub Star!!
Cub Star!!
Posts: 445
Joined: Wed Jan 14, 2004 7:31 am
Zip Code: 66801
Tractors Owned: 1948 Cub
1951 Cub
1938 MH 101
1949 MH 44
Circle of Safety: Y
Location: KS, Emporia

Re: New Wall

Postby Ike » Wed Nov 21, 2012 10:14 am

cubguy47 wrote:Should not matter either way, I would be more concerned with getting the best yield out of your plywood sheeting and determine your vertical or horizontal mounting that way.


I agree. On a non-supporting partition wall such as this, the sheathing is more about containing and protecting the insulation than strength.

http://osbguide.tecotested.com/osbfaqs
Quote from the above link to the OSB Guide.
"OSB wall sheathing panels may be installed either horizontally (across the supports) or vertically (parallel to the supports)."

Ike

User avatar
spaceghost
10+ Years
10+ Years
501 Club
501 Club
Posts: 748
Joined: Wed Jun 23, 2004 8:19 am
Zip Code: 02346
Tractors Owned: 1959 Cub lo-boy
1950 super A
Location: Middleboro MA usa

Re: New Wall

Postby spaceghost » Wed Nov 21, 2012 2:53 pm

Bill
What is the little window for in the middle of the wall? Are you going to be selling ice cream from the shop? I will take a hot fudge sunday with nuts lots of nuts
Bacon makes every thing better.
1959 LO-Boy 1950 Super A

User avatar
ricky racer
5+ Years
5+ Years
501 Club
501 Club
Posts: 3692
Joined: Wed Sep 12, 2007 8:40 pm
Zip Code: 49120
Circle of Safety: Y
Location: Niles / Buchanan, Michigan

Re: New Wall

Postby ricky racer » Wed Nov 21, 2012 4:06 pm

Great job! You know, with all this extra time you have on your hands these days, maybe I can talk you into making a trip to Michigan. I've got plenty of projects that could use your expertise. :lol: :lol:
1929 Farmall Regular
1935 John Deere B
1937 John Deere A
1941 John Deere H
1952 John Deere B
1953 Farmall Cub

User avatar
Boss Hog
Cub Pro
Cub Pro
501 Club
501 Club
Posts: 10192
Joined: Mon Oct 24, 2005 8:35 pm
Zip Code: 23962
eBay ID: dmb2613
Circle of Safety: Y
Location: VA. Randolph

Re: New Wall

Postby Boss Hog » Wed Nov 21, 2012 4:50 pm

Yes Bill stand it up, It may not be important but it is the strongest way. I am sure a contractor is a member of the board somewhere and I feel that he or she will agree with me.It will also help to square the wall up.
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg

User avatar
Boss Hog
Cub Pro
Cub Pro
501 Club
501 Club
Posts: 10192
Joined: Mon Oct 24, 2005 8:35 pm
Zip Code: 23962
eBay ID: dmb2613
Circle of Safety: Y
Location: VA. Randolph

Re: New Wall

Postby Boss Hog » Wed Nov 21, 2012 5:17 pm

You may also want to double up the 2X4s where the door hinges will be , it will help keep the door from sagging after some use
Boss
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg

User avatar
Boss Hog
Cub Pro
Cub Pro
501 Club
501 Club
Posts: 10192
Joined: Mon Oct 24, 2005 8:35 pm
Zip Code: 23962
eBay ID: dmb2613
Circle of Safety: Y
Location: VA. Randolph

Re: New Wall

Postby Boss Hog » Wed Nov 21, 2012 5:23 pm

you need to have the studs on 16 in or 2 foot centers to may the plywood run out right any way
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg

User avatar
Barnyard
Team Cub
Team Cub
501 Club
501 Club
Posts: 19942
Joined: Tue Aug 07, 2007 3:39 pm
Zip Code: 45030
Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100
Circle of Safety: Y
Location: OH, New Haven (Hamilton County)

Re: New Wall

Postby Barnyard » Wed Nov 21, 2012 6:54 pm

Bob, The window will be for Cubfest antendees to walk up and get any tools they need. Jeff Silvey will be satnding there and fetching anythin that is needed. Actually I have a big AC wall unit that will be going in there. As long as I leave the slider door open when it is in use it will work fine.

Now for the rest of the story. This is a temporay wall. It is only meant to be there for a couple years at the most so I do not want to spend a ton of my pension on it. Since there is no building weight on it I am not overly concerned about downward strength. The joists seen above the wall are actually resting on the original barn beams and are fully capable of doing their job. The door works fine and there is no worry about any sagging.

Now, if this were going to be a permanent fixture I would have dropped a few more bucks on it. After being a Building Manager and and Bulding Maintenace Specialst for most of my life, there are a few things I remember. :D

And yes, the studs are 16" on center.
It is common sense to take a method and try it. If it fails, admit it frankly and try another. But above all, try something.
- Franklin D. Roosevelt -

Circle of Safety


Return to “Projects Forum”

Who is online

Users browsing this forum: No registered users and 1 guest