So I needed a new eye bolt for my 193 plow and was thinking I'd need to buy one or rig something up when I came across this at the local hardware store: (Except mine was only 8" long)
http://www.acehardwareoutlet.com/Produc ... =998082270
It's a 5/8" bolt hook. It was super easy to convert it into a near perfect replacement.
It's already got 5/8-11 threads, a head width that's about perfect, and has a pin pressed into it that's about 5/8".
I used a cutoff wheel to cut off the pin, then pressed it out. Then I drilled the hole out to 5/8" for the clevis pin that holds it to the dog bone.
Then I cut the threaded portion to length and cleaned up the threads.
That's it. I had about $6 in it and it bolted up perfectly.
I'm not saying it's gonna work for an original type replacement for the serious collector, but for a working tractor it's just fine.
Here's a before and a couple after pics.
Hope this helps some of you out.
How to fix them and how to use them.
Moderator: Team Cub
1 post • Page 1 of 1
- 5+ Years
- Posts: 143
- Joined: Sat Feb 18, 2012 6:50 am
- Zip Code: 46725
- Tractors Owned: '47 Cub
'77 IH Cub
'49 Farmall C w/trip bucket loader
- Circle of Safety: Y
- Location: Whitley County Indiana
Last edited by grasser on Sun Aug 26, 2012 6:12 pm, edited 2 times in total.
- Similar Topics
- Last post
Mon Apr 17, 2017 5:42 pm
Sun Apr 30, 2017 5:57 pm
by Bill Hudson
Wed Apr 18, 2018 8:20 pm
Fri Sep 07, 2018 2:47 pm
Tue Apr 25, 2017 4:47 am
Who is online
Users browsing this forum: No registered users and 0 guests