Mama's Happy -- Everyone's Happy

Got a project that you are working on that is not a tractor? Maybe a barn to hold your tractors or just fun stuff like woodworking, glass, tools, sheds, gardens, custom implements, etc., this is the place to talk about it.

Moderator: Team Cub

Bill E Bob
10+ Years
10+ Years
501 Club
501 Club
Posts: 2931
Joined: Wed May 31, 2006 12:09 pm
Zip Code: 74070
Circle of Safety: Y
Location: OK, Skiatook

Mama's Happy -- Everyone's Happy

Postby Bill E Bob » Wed May 02, 2012 2:01 pm

Finally finished Mama's yard art project. She had wanted a larger windmill for the back yard and the "store bought" 8 footer was getting shopworn. We bought the "head" assembly about two years ago and I finally got around to completing the tower yesterday. Used 2x2x1/8" and 1x1x1/8" angle iron for construction and poured 4 support columns with imbedded "J" bolts to tie it down. Brush painted it with Rustoleum Hammered Silver--gives a good "galvanized" look. The head assy. consisted of the vane and fan and is sturdily built with square tubing, a 1" arbor for the fan and sealed bearings. With luck, the only maintenance will be paint touch up. I measured the fan, compared it to the fan on the 8 footer and upsized the tower by approx 1/3 to maintain scale. No close ups as my stick welding abilities are far from professional :oops:

Image

Image

Image

User avatar
beaconlight
Cub Pro
Cub Pro
501 Club
501 Club
Posts: 7703
Joined: Thu Aug 19, 2004 2:31 pm
Zip Code: 10314
Location: NY Staten Island & Franklin

Re: Mama's Happy -- Everyone's Happy

Postby beaconlight » Wed May 02, 2012 4:41 pm

Looking good. Keep a good woman happy and you will have an enjoyable lo0ng life.
Bill

"Life's tough.It's even tougher if you're stupid."
- John Wayne

" We hang petty thieves and appoint the great ones to public office."
- Aesop

User avatar
Winfield Dave
5+ Years
5+ Years
501 Club
501 Club
Posts: 2898
Joined: Thu Apr 22, 2010 2:31 pm
Zip Code: 17953
Tractors Owned: ......Almost enough
Circle of Safety: Y
Location: PA, Middleport (Schuylkill County)

Re: Mama's Happy -- Everyone's Happy

Postby Winfield Dave » Wed May 02, 2012 5:49 pm

:thumbsup: :thumbsup:
Dave
"More gold has been mined from the thoughts of men than has been taken from the earth." -- Napoleon Hill

User avatar
Yogie
Cub Pro
Cub Pro
501 Club
501 Club
Posts: 5126
Joined: Sat Sep 08, 2007 3:49 pm
Zip Code: 25271
eBay ID: yogiefisher
Tractors Owned: 37 John Deere A
63 Farmall Cub
53 Farmall Cub
Circle of Safety: Y
Location: WV. Ripley

Re: Mama's Happy -- Everyone's Happy

Postby Yogie » Thu May 03, 2012 4:02 am

Very nice job Bill, your wife should enjoy her wind mill for many years. Looks like a pretty neat weather station, wind direction, rain gauge and all. :{_}:
Image
Democracy is two wolves and a lamb voting on what to have for lunch. Liberty is a well-armed lamb contesting the vote.
Ben Franklin

User avatar
Stanton
Team Cub Mentor
Team Cub Mentor
501 Club
501 Club
Posts: 3849
Joined: Mon Jun 22, 2009 6:56 am
Zip Code: 64070
Tractors Owned: 1945 Farmall H, serial #213,651
1947 Farmall Circle Cub, serial #2116
1948 Farmall Cub, serial #46066
Circle of Safety: Y
Location: Lone Jack, MO

Re: Mama's Happy -- Everyone's Happy

Postby Stanton » Thu May 03, 2012 6:28 am

Good job, Bill. With it being out there in the yard, you should get some movement if any wind is blowing at all.

There's an old standard height (if there is such a thing) windmill for sale not too far away from. I had given thought to checking it out. Would look nice set up in the back yard.

Thanks for sharing pictures/story. As long as "mama" is happy, that's all that matters!!
Stanton
Image Circle of Safety

Bill E Bob
10+ Years
10+ Years
501 Club
501 Club
Posts: 2931
Joined: Wed May 31, 2006 12:09 pm
Zip Code: 74070
Circle of Safety: Y
Location: OK, Skiatook

Re: Mama's Happy -- Everyone's Happy

Postby Bill E Bob » Thu May 03, 2012 6:45 am

Thanks guys. Would have liked a standard sized mill, but don't think the neighbors would have been too keen on the idea, AND, being the highest point around, it would have needed considerable grounding :wink:


Return to “Projects Forum”

Who is online

Users browsing this forum: No registered users and 0 guests