Wed Dec 14, 2011 1:09 pm
the air cleaner on my 450 came to me in pieces. the air intake tube was pulled out of the body of the air cleaner. i have it back together properly, but i need a measurement as to how far the tube sticks out the bottom of the air cleaner. thanks, art
Thu Dec 15, 2011 8:50 am
If no one comes up with anything today, I'll measure mine when I get home tonight and post it for you in the morning...
Thu Dec 15, 2011 12:02 pm
Fri Dec 16, 2011 8:13 am
Measured it last night with the hood on, done the best I could. From the bottom side of the shell body down to the centerline of the 90 turn to the carb inlet 16-1/2" Filter intake...measured from the top of the shell body to the underside of the my precleaner was 7-1/2" Hope that helps.
Fri Dec 16, 2011 8:32 am
i wasn't exactly clear, i guess. the tube that was removed from my air cleaner was the vertical air inlet tube that goes through the hood. it is supposed to go through the air cleaner and into the oil reservoir in the cup at the bottom. i just don't know how far below the screen retainer to set the tube. sorry for the confusion.
Tue Dec 20, 2011 10:11 am
Well now I understand...if you still need it let me know. I can pull the cup off the air cleaner and get the measurement down from the screen tonight.
Wed Dec 21, 2011 7:03 pm
yes, i could use it. thanks, art
Tue Dec 27, 2011 7:51 am
Got your measurement over the long weekend...I hope. The Intake pipe sticks down below the screen into the cup 7/8". I would've posted it a couple days ago, but still having computer issues at home. I hope this is the measurement you're looking for.
Fri Dec 30, 2011 10:47 am
thanks, thats the number i needed. art
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.