42 H transmission

Farmall H, HV & Super H, 1939-1954

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.

42 H transmission

Postby Phillip W. Lenke » Thu Jun 09, 2011 7:15 am

Recently aquired a 42 H
fourth gear has 2 broke teeth on counter shaft
have the to sliding gears out need to get the lower countershaft out have it loose bearings out etc , book says to lift right out, with the large gear in place it will not come out of the tranny.
anybody been that far into the tranny , to help
I know the gears are pressed and keyed , appears I will have to pull the front gear, any help would be appreciated

Phil
"Work Hard ,Play Often,Care Always"
Phillip W. Lenke
5+ Years
5+ Years
 
Posts: 1479
Joined: Wed May 25, 2005 1:21 pm
Zip Code: 43449

Re: 42 H transmission

Postby KETCHAM » Thu Jun 09, 2011 11:13 am

I will be no help on this Phil.Mine works great at the moment and I hope it stays that way.Much differnt than your M??? Good luck.Kevin :shock: :shock:
47 CUB[Krusty] 49 CUB[Ollie] 50 H-- PLOWS DISCS MOWERS AND lots more stuff!!Life is to short -Have fun now cause ya ain't gonna be here long!!!!
User avatar
KETCHAM
5+ Years
5+ Years
 
Posts: 5511
Joined: Thu Jul 28, 2005 2:37 pm
Location: Marshallville Ohio
Zip Code: 44645
eBay ID: kevinb2366
Tractors Owned: 47 Cub 48 Cub 50 H

Re: 42 H transmission

Postby Phillip W. Lenke » Thu Jun 09, 2011 12:38 pm

I talked to Tina Hines at Hines Equipment in Delta Ohio
She said it does come out as one unit , minus the bearings , it is just takes some patience.
IHC was ahead of the times , the puzzles that will only come apart one way , the horseshoes and chain, 2 bent nail things ,chinese puzzle boxes,etc. :lol:
Phil
"Work Hard ,Play Often,Care Always"
Phillip W. Lenke
5+ Years
5+ Years
 
Posts: 1479
Joined: Wed May 25, 2005 1:21 pm
Zip Code: 43449

Re: 42 H transmission

Postby Phillip W. Lenke » Sat Jun 11, 2011 10:31 pm

Got the counter shaft out, found that the front gear was to far forward had to be tapped back on shaft ,came right out.
as a complete assy
Phil
"Work Hard ,Play Often,Care Always"
Phillip W. Lenke
5+ Years
5+ Years
 
Posts: 1479
Joined: Wed May 25, 2005 1:21 pm
Zip Code: 43449


Return to Farmall H & Super H

Who is online

Users browsing this forum: No registered users and 2 guests