IH loader

Farmall H, HV & Super H, 1939-1954

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.

IH loader

Postby Phillip W. Lenke » Sun May 08, 2011 5:37 pm

I just found a Farmall H 1942 distillate, my brother and I picked it up Friday Am. was a non runner for the past two years , got it running smooth now new plugs ,coil and a complete fluid change .
It came with a front end loader the old stye with the two cylinders. has anyone restore one of these loaders it has two cylinders, around three long single action, when I got it fired up the cylinders spued water the milk. want to get them fixed up the loader is pretty nice for the age.
Need somthing like this around the woods.
I will get a picture of the loader and post it .


Thanks in advance
Phil
"Work Hard ,Play Often,Care Always"
Phillip W. Lenke
5+ Years
5+ Years
 
Posts: 1479
Joined: Wed May 25, 2005 1:21 pm
Zip Code: 43449

Re: IH loader

Postby John *.?-!.* cub owner » Sun May 08, 2011 8:05 pm

I just gave away a model 30 that was on Dad's H at one time. It had an extra set of cylinders I might be able to get for you if yours are beyond repairing which is a good possibility..

Here is a link to a model 30 loader. The model 31 was very similar.
http://home.centurytel.net/ejpuckett/Ma ... %20loader/
"The Constitution is not an instrument for the government
to restrain the people, it is an instrument for the people to restrain the
government lest it come to dominate our lives and interests." Patrick Henry
User avatar
John *.?-!.* cub owner
Team Cub Guide
Team Cub Guide
 
Posts: 19553
Joined: Sun Feb 02, 2003 2:09 pm
Location: Mo, Potosi
Zip Code: 63664
Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.

Re: IH loader

Postby Phillip W. Lenke » Mon May 16, 2011 9:35 am

Got them restored.
Made the new felt dust seals and loxcal Hydraulic repar shop ordered new V packing and I mad a spanner wrench to remove the packing nuts.
Smoothed off the cylinders as they were not Chromed. When we fired the H up and lifted thre bucket, pushed water/ oil mix ( milk.) Cleaned out good and ready to go.

Image

after I like the red contrast to the brown
Phil
"Work Hard ,Play Often,Care Always"
Phillip W. Lenke
5+ Years
5+ Years
 
Posts: 1479
Joined: Wed May 25, 2005 1:21 pm
Zip Code: 43449


Return to Farmall H & Super H

Who is online

Users browsing this forum: No registered users and 1 guest

cron