How To Rebuild a Touch Control Pump

Time saving tips to keep your Cub running smooth

Moderators: Barnyard, Team Cub

troopfpc
5+ Years
5+ Years
Posts: 545
Joined: Thu Dec 25, 2008 2:44 pm
Zip Code: 07461
Tractors Owned: 1957 Cub, 1951 Cub, 198? JD 500C, 1954 Oliver OC3
Location: NJ, Sussex County

How To Rebuild a Touch Control Pump

Postby troopfpc » Sun Aug 02, 2009 2:05 pm

Here is a pictorial on how to rebuild a touch control pump. A few things to keep in mind:

  • All parts must be thoroughly cleaned before re-assembling.
  • You must lubricate everything when putting it back together.
  • Make sure the hydro fluid gets into the pump from its lines before running the tractor.
  • Running the pump while dry will quickly ruin it.
  • The repair kits come with extra parts that will not be needed and the directions with the kits are not that good. They only cause confusion on where the parts go. Refer to the pictures here to get it done right.
  • Enjoy...... :D

Image

Image


Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image
I know a little about everything and alot about nothing....

Return to “Engine, Clutch, Transmission and Hydraulics”

Who is online

Users browsing this forum: No registered users and 0 guests