This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
1450 hydro input shaft flange falling off
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- Radec Aksarben
- 5+ Years
- Posts: 219
- Joined: Mon Jul 14, 2014 11:53 am
- Zip Code: 68736
- Tractors Owned: '48 Farmall Cub w/ IH-Danco C2 belly mower, full cultivator
'52 Farmall Cub w/ 193 plow, 28-A disk, flail mower, buzz saw, leveling blade,
misc cultivator parts and attachments
1450 Cub Cadet with mower deck (sold)
'49 Farmall M w/ factory disk brakes (not super style)
'51 International I-9 - rusty yellow (sold but in family) - Circle of Safety: Y
1450 hydro input shaft flange falling off
Anybody have the flange on the input shaft to the hydro try to fall off? Terrible vibrations so stopped to look. The flange is rotated about the shear bolt. I have a picture on my phone but it is too large to upload....
- Radec Aksarben
- 5+ Years
- Posts: 219
- Joined: Mon Jul 14, 2014 11:53 am
- Zip Code: 68736
- Tractors Owned: '48 Farmall Cub w/ IH-Danco C2 belly mower, full cultivator
'52 Farmall Cub w/ 193 plow, 28-A disk, flail mower, buzz saw, leveling blade,
misc cultivator parts and attachments
1450 Cub Cadet with mower deck (sold)
'49 Farmall M w/ factory disk brakes (not super style)
'51 International I-9 - rusty yellow (sold but in family) - Circle of Safety: Y
Re: 1450 hydro input shaft flange falling off
Looks like I lost one Of the rag joint bolts. I will have to look closer tomorrow to try to see if that's all that happened. I suppose all that shaking isn't good for motor mounts.
-
- 10+ Years
- Posts: 7388
- Joined: Sat Jul 22, 2006 5:02 pm
- Zip Code: 00000
- Location: in northern usa
Re: 1450 hydro input shaft flange falling off
Show us a pic?
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.
- gitractorman
- 10+ Years
- Posts: 2680
- Joined: Mon Oct 24, 2005 11:35 am
- Zip Code: 14072
- eBay ID: toysforjake
- Tractors Owned: Lots of Cub Cadets!
1951 Farmall Cub
1977 IH Cub
1966 IH Cub
1965 IH Lo Boy
1964 IH Lo Boy
1949 Farmall Cub
Several IH 154 Lo Boys
1979 IH 184 Lo Boy
Simplicity 4416 Sovereign
Simplicity Conquest
Simplicity Legacy 4x4 Diesel
Mitsubishi MT180D 4x4 Diesel - Circle of Safety: Y
- Location: Grand Island, NY
Re: 1450 hydro input shaft flange falling off
I'll bet that one of the bolts came out of the drive shaft, and everything rotated on the other bolt. Not a big deal, just line everything back up and throw another bolt and lock nut on it.
Cub Cadets 682, 1811, 1864, Simplicity Legacy XL 4x4 Diesel with FEL, 60" mower, 50" Tiller
-
- 10+ Years
- Posts: 7388
- Joined: Sat Jul 22, 2006 5:02 pm
- Zip Code: 00000
- Location: in northern usa
Re: 1450 hydro input shaft flange falling off
That’s what happened to my cc 129 to the PO. She spit out the complete drive shaft. I swapped the 12 hp into my 108 that has acreeper.
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.
Who is online
Users browsing this forum: No registered users and 8 guests