New member gear shifter problem

IH CUB Lo-Boy Series - 154, 184, 185 Forum -- Questions and answers to all of your Lo-Boy related issues.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Jjwolf
Posts: 3
Joined: Thu Jun 07, 2018 1:19 am
Zip Code: 17745

New member gear shifter problem

Postby Jjwolf » Thu Jun 07, 2018 1:44 am

Any help would be great. I paid 1600 for a 154 to cut grass with got it off the trailor and the shifter went to the floor I can almost pull it out of the top of the housing tractor stuck in reverse the serial number is 2000122u if that means anything I am new tractor owner never had one before pictures are great for me if anyone can help

Larry B
Cub Star
Cub Star
Posts: 162
Joined: Tue Jul 29, 2014 4:16 pm
Zip Code: 45325
Tractors Owned: IH 184
Location: Farmersville ohio

Re: New member gear shifter problem

Postby Larry B » Thu Jun 07, 2018 10:15 am

Go to utube and search"taryl fixes all shifter" the video is for 184 but should be as about the same for a 154

outdoors4evr
10+ Years
10+ Years
Posts: 1447
Joined: Tue Jul 22, 2008 12:44 pm
Zip Code: 48423
Tractors Owned: 184
Location: Davison, MI

Re: New member gear shifter problem

Postby outdoors4evr » Thu Jun 07, 2018 11:24 am

Hopefully, it is just a missing pin that needs to be replaced. Post again (like a reply to this post) and you will be able to see the manuals link in the upper right corner of the forum Index page. Then find the manual for a 154 and you will be able to see the assembly.
184 w/ Creeper & 3-Point
IH 3160a Mower
IH Model 15 Tiller

Jjwolf
Posts: 3
Joined: Thu Jun 07, 2018 1:19 am
Zip Code: 17745

Re: New member gear shifter problem

Postby Jjwolf » Thu Jun 07, 2018 12:50 pm

I will check YouTube thanks and also look for a manual to look for pin

Bomar
Posts: 9
Joined: Thu Nov 09, 2017 12:20 pm
Zip Code: 30281
Tractors Owned: '74 154 Cub Lo-Boy

Re: New member gear shifter problem

Postby Bomar » Sat Jun 09, 2018 8:02 pm

Hi JJ wolf,
I have a '74 154, that I got a couple months ago. It was left in a field where it broke down 3 years ago, and the shifter on the floor like yours. In the last week I got the motor tuned up and running (needs carb kit but it runs!). And yesterday I opened the trans and found that the shifter broke of just inside the cup/seal. I'm looking for a new one cause the return line is also cracked but I have it a quick weld (I don't expect it to hold to long) and it's working great! I actually got it going and cut a good bit of great in 15 minutes.

:tractor:
I took videos of all of it and I'm going to post the YouTube as a small serious. It's just a matter of finding the time.
Don't be afraid to open it up. If you take your time it's not bad, and should be cheap to have welled if you can't. Let me know if you have any questions

Jjwolf
Posts: 3
Joined: Thu Jun 07, 2018 1:19 am
Zip Code: 17745

Re: New member gear shifter problem

Postby Jjwolf » Thu Jun 14, 2018 4:56 pm

It was the shifter hub that broke the dome I got it welded and back in business now gotta figure out the charging problem I watched the tyral fixies all video on you tube walks you right through it like Larry b said


  • Similar Topics
    Replies
    Views
    Last post

Return to “Lo-Boy Series - 154, 184, 185”

Who is online

Users browsing this forum: No registered users and 2 guests