364 ztr, briggs 18 Hp vtwin

IHC Cub Cadet Forum -- Questions and answers to all of your Cadet related issues.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
User avatar
Larry in IN
10+ Years
10+ Years
Posts: 422
Joined: Mon Feb 03, 2003 12:35 am
Zip Code: 46750
Tractors Owned: '59 cub running
'48 'H' running?
'54 '400' project
'67 806' project
?? '706' project
'70' 826G Hydro 'every day power! 1 of 14
'71' MM G1050 - Big iron
'51' JD 'R' project
'61 JD 3010 project
'48 Allis 'G'
'??' F-12 my son's
Location: INDIANA, NE

364 ztr, briggs 18 Hp vtwin

Postby Larry in IN » Sat May 05, 2018 3:31 pm

Hi group,
Quite a while since I have been able to be here... :help:
New trick from my [MTD} Cub cadet 364 ztr - when I turn the key off, the starter motor keeps on spinning - not engaging, just spinning. After I disconnect the batt for a while it may not do until after it runs again???
? key switch or starter solenoid?
Thoughts?
Spring has come to Indiana suddenly, sure is welcome.

Thanks to all, May God continue to Bless America!

-law
One of the few advantages of growing older is that I finally realized that I haven't made ALL the stupid mistakes! Yet!

Gary Dotson
Team Cub Mentor
Team Cub Mentor
Posts: 3076
Joined: Thu Aug 03, 2006 6:20 am
Zip Code: 43358
Tractors Owned: 48 Cub Diesel (Cubota)
53 Cockshutt 20 restored (Shooter)
52 Cockshutt 20 unrestored
47 Leader "B" (Herckie)
49 Leader "D" (Princess)
49 Leader "D" very rough
48 Leader "D" unrestored
Kubota B6200E
Kubota B6200HST
Kubota B8200HST-D
Circle of Safety: Y
Location: OH West Mansfield

Re: 364 ztr, briggs 18 Hp vtwin

Postby Gary Dotson » Sun May 06, 2018 7:24 am

I would think it's most likely stuck contacts in the solenoid. Someone more familiar with these may have more insight for you, I'm just taking a mechanics guess.

outdoors4evr
10+ Years
10+ Years
Posts: 1403
Joined: Tue Jul 22, 2008 12:44 pm
Zip Code: 48423
Tractors Owned: 184
Location: Davison, MI

Re: 364 ztr, briggs 18 Hp vtwin

Postby outdoors4evr » Mon May 07, 2018 6:44 am

Figure out if the safety switches still work. With the mower deck engaged, take your weight off the seat and see if the engine dies.
Either they key switch is failing or there is a problem with the safety interlock switches.

Wiring harness connections also like to fail after sitting for the winter. A lot of people clean their equipment in the fall and put them away dripping. The water can get into the connectors and corrode the connections.
184 w/ Creeper & 3-Point
IH 3160a Mower
IH Model 15 Tiller

BigBill
10+ Years
10+ Years
Posts: 6346
Joined: Sat Jul 22, 2006 5:02 pm
Zip Code: 00000
Location: in northern usa

Re: 364 ztr, briggs 18 Hp vtwin

Postby BigBill » Mon May 07, 2018 2:02 pm

I usually give the solenoid a shot with a hammer to unstick it, lightly. Then put the battery cable on and try it. If she sticks again I change the solinoid. As said above water isn’t our friend,
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.


  • Similar Topics
    Replies
    Views
    Last post

Return to “Cub Cadet”

Who is online

Users browsing this forum: No registered users and 1 guest