Depending on what you read and where, the Cub engine in the 184 Loboy put out anywhere from 18-21HP. I don't think it's true.
A freshly rebuilt Cub engine will seem like a powerhouse compared to an old tired worn out engine.
What you have to keep in mind is that in hotrodding ANY engine, you get a PERCENTAGE of increased power with every improvement.
When you put a goal of getting "only" 5HP more out of a Cub engine, remember that you're trying to increase its output by over 50%!
It takes a LOT of work and parts to get 5HP more out of a small block V8 engine that puts out hundreds of HP. That's only about 1-2% increase.
Here, you're talking about 50% more. On a small block V8 when they want to increase the HP by 50%, they put on a blower or nitrous.
The relationship is proportional, not linear. 50% more horsepower out of a Cub engine takes the same kind of work and parts as 50% more horsepower out of a small block V8 engine.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Engine question
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 4948
- Joined: Tue Jun 08, 2004 3:04 pm
- Zip Code: 14559
- Circle of Safety: Y
- Location: Rochester, NY
-
- 10+ Years
- Posts: 1573
- Joined: Sun Feb 02, 2003 11:01 pm
- Zip Code: 36310
- Tractors Owned: 1975 IH cub,1948 farmall cub,1979 international 3200 skid steer and a 1974 John deere 350B dozer.
- Location: Abbeville Alabama
Re: Engine question
the 184 and 185 loboy has around 16 HP at the PTO shaft with engine running at 2600 RPM.
Collector of Farmall cubs and cub cadets.Injoy helping people keep their cubs running. Years of experipnce.
-
- 5+ Years
- Posts: 10
- Joined: Wed May 07, 2014 8:49 pm
- Zip Code: 16327
Re: Engine question
Let me recap. Start with tune up. I have done plugs and wires, and generator. What else should I do for tune up? Then compression test. What should the compression test read? What about the smoke? Rings?
-
- Team Cub Mentor
- Posts: 20369
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: Engine question
Valve tappet clearance, ignition timing, clean the air cleaner. The operator's manual describes the procedures and a few more items to check. There is help in the "How To" section of this site.What else should I do for tune up?
Take the compression tests, record the readings. Report the readings. We can tell you what the readings indicate.What should the compression test read?
Try the SeaFoam, see it it helps. You could very well need an engine overhaul, but lets wait and see the compression test results and if the SeaFoam works.What about the smoke? Rings?
I have an excuse. CRS.
- Urbish
- 10+ Years
- Posts: 2428
- Joined: Sat Sep 07, 2013 3:45 pm
- Zip Code: 48158
- Tractors Owned: ~
1958 International Cub LoBoy
1947 Farmall H
1946 Farmall B
1953 Willys CJ3B
2022 Massey Ferguson GC1723E Subcompact
Cub Loboy L-54 Leveling and Grader Blade - Circle of Safety: Y
- Location: Manchester, MI
Re: Engine question
Matt Kirsch wrote:
Here, you're talking about 50% more. On a small block V8 when they want to increase the HP by 50%, they put on a blower or nitrous.
You now have me hoping that somebody somewhere has but a blower and some NoS bottles on a Cub. Doesn't matter if it's functional, would be hilarious to see!
Jim
- Urbish
- 10+ Years
- Posts: 2428
- Joined: Sat Sep 07, 2013 3:45 pm
- Zip Code: 48158
- Tractors Owned: ~
1958 International Cub LoBoy
1947 Farmall H
1946 Farmall B
1953 Willys CJ3B
2022 Massey Ferguson GC1723E Subcompact
Cub Loboy L-54 Leveling and Grader Blade - Circle of Safety: Y
- Location: Manchester, MI
Re: Engine question
Keep in mind that any attempt to increase power will risk finding the next weakest component in the system. I would suspect that if you juiced up your power, overloaded it and have enough traction, the transmission would be the next in line to detonate.
Jim
-
- 5+ Years
- Posts: 10
- Joined: Wed May 07, 2014 8:49 pm
- Zip Code: 16327
Re: Engine question
The entire back half of the tractor has been redone except for a paint job. Here's the rest of the story. I hope you have time. My dad has a cub lowboy it is an awesome tractor but hardly ever uses it. I had a 35 hp compact tractor with loader. My dad was looking for something like that. I asked him if he wanted to trade just to use not to own. He after a year he still wasn't sure. So I moved on and started looking for a cub of my own.
Phase 2
I have a great neighbor he's 80ish and has a great heart but can get carried away. one day i say to him "i'm looking for a farmall cub let me know if you see one". two days latter he tells me he bought me a farmall cub. I say what do you mean? He says i seen one at a garage sale and bought it for you. if you want it i paid a 1000. well what was i to do. i would not have bought the tractor. it was a mess. so i took it to a tractor repair guy. he is an awesome guy but a little vague on pricing. i should have pinned him down to a price but i didn't. we started from the back and worked are way forward. we got to the engine and i had 2000 more rapped up in the tractor. we started in on the engine and the front of the block was cracked and the casting that held the front end on was busted. we don't know how the front end didn't fall off. at this point you could imagine my wife. i have 3000 wrapped up in a tractor and the engine is not repairable. this guy can fix anything, truly fix anything and he said it was beyond repair. So we find an engine from a guy who had a cub lowboy that was sitting in a field forever for 250 dollars. we bolted it up and away we went. So that is the story. the bad part is i am in love with the tractor. i have more in it than it is worth but i can't part with it. so i really want to get it to the point where it doesn't struggle to mow grass. Keep the help coming.
Phase 2
I have a great neighbor he's 80ish and has a great heart but can get carried away. one day i say to him "i'm looking for a farmall cub let me know if you see one". two days latter he tells me he bought me a farmall cub. I say what do you mean? He says i seen one at a garage sale and bought it for you. if you want it i paid a 1000. well what was i to do. i would not have bought the tractor. it was a mess. so i took it to a tractor repair guy. he is an awesome guy but a little vague on pricing. i should have pinned him down to a price but i didn't. we started from the back and worked are way forward. we got to the engine and i had 2000 more rapped up in the tractor. we started in on the engine and the front of the block was cracked and the casting that held the front end on was busted. we don't know how the front end didn't fall off. at this point you could imagine my wife. i have 3000 wrapped up in a tractor and the engine is not repairable. this guy can fix anything, truly fix anything and he said it was beyond repair. So we find an engine from a guy who had a cub lowboy that was sitting in a field forever for 250 dollars. we bolted it up and away we went. So that is the story. the bad part is i am in love with the tractor. i have more in it than it is worth but i can't part with it. so i really want to get it to the point where it doesn't struggle to mow grass. Keep the help coming.
-
- 5+ Years
- Posts: 10
- Joined: Wed May 07, 2014 8:49 pm
- Zip Code: 16327
Re: Engine question
The entire back half of the tractor has been redone except for a paint job. Here's the rest of the story. I hope you have time. My dad has a cub lowboy it is an awesome tractor but hardly ever uses it. I had a 35 hp compact tractor with loader. My dad was looking for something like that. I asked him if he wanted to trade just to use not to own. He after a year he still wasn't sure. So I moved on and started looking for a cub of my own.
Phase 2
I have a great neighbor he's 80ish and has a great heart but can get carried away. one day i say to him "i'm looking for a farmall cub let me know if you see one". two days latter he tells me he bought me a farmall cub. I say what do you mean? He says i seen one at a garage sale and bought it for you. if you want it i paid a 1000. well what was i to do. i would not have bought the tractor. it was a mess. so i took it to a tractor repair guy. he is an awesome guy but a little vague on pricing. i should have pinned him down to a price but i didn't. we started from the back and worked are way forward. we got to the engine and i had 2000 more rapped up in the tractor. we started in on the engine and the front of the block was cracked and the casting that held the front end on was busted. we don't know how the front end didn't fall off. at this point you could imagine my wife. i have 3000 wrapped up in a tractor and the engine is not repairable. this guy can fix anything, truly fix anything and he said it was beyond repair. So we find an engine from a guy who had a cub lowboy that was sitting in a field forever for 250 dollars. we bolted it up and away we went. So that is the story. the bad part is i am in love with the tractor. i have more in it than it is worth but i can't part with it. so i really want to get it to the point where it doesn't struggle to mow grass. Keep the help coming.
Phase 2
I have a great neighbor he's 80ish and has a great heart but can get carried away. one day i say to him "i'm looking for a farmall cub let me know if you see one". two days latter he tells me he bought me a farmall cub. I say what do you mean? He says i seen one at a garage sale and bought it for you. if you want it i paid a 1000. well what was i to do. i would not have bought the tractor. it was a mess. so i took it to a tractor repair guy. he is an awesome guy but a little vague on pricing. i should have pinned him down to a price but i didn't. we started from the back and worked are way forward. we got to the engine and i had 2000 more rapped up in the tractor. we started in on the engine and the front of the block was cracked and the casting that held the front end on was busted. we don't know how the front end didn't fall off. at this point you could imagine my wife. i have 3000 wrapped up in a tractor and the engine is not repairable. this guy can fix anything, truly fix anything and he said it was beyond repair. So we find an engine from a guy who had a cub lowboy that was sitting in a field forever for 250 dollars. we bolted it up and away we went. So that is the story. the bad part is i am in love with the tractor. i have more in it than it is worth but i can't part with it. so i really want to get it to the point where it doesn't struggle to mow grass. Keep the help coming.
-
- 5+ Years
- Posts: 10
- Joined: Wed May 07, 2014 8:49 pm
- Zip Code: 16327
Re: Engine question
i forgot. My dad said that i could have his the day after i bought this one. i had also told my father i would have the tractor totally redone for him including paint job. LIfe.
-
- 10+ Years
- Posts: 3369
- Joined: Mon Feb 17, 2003 8:48 pm
- Zip Code: 28081
- Circle of Safety: Y
- Location: NC, Kannapolis
Re: Engine question
You didn't mention which mower you are using. 59" mowers are harder to pull. Have you checked to see if blade(s) are slightly lower in front when parallel with tractor and deck is at mowing height?
"I'd rather be a mechanic in the shop"- Henry Ford
252646 & 221525. 195897 (Gone, but not forgotten)
252646 & 221525. 195897 (Gone, but not forgotten)
-
- 5+ Years
- Posts: 10
- Joined: Wed May 07, 2014 8:49 pm
- Zip Code: 16327
Re: Engine question
It is a 5 foot mower with 3 blades. I don't know the make it came with my dads tractor. I also have the 4 foot mower single blade that came with the tractor when i bought it. I have not checked the tilt.
-
- 10+ Years
- Posts: 3369
- Joined: Mon Feb 17, 2003 8:48 pm
- Zip Code: 28081
- Circle of Safety: Y
- Location: NC, Kannapolis
Re: Engine question
The 42 inch mower can use up to one half inch difference, the three blade, a quarter to three-eights inch. Deere makes a plastic gauge for setting blade height. Works well and not much money. I hav a pix of one on photo host but can't make my phone copy the URL.
"I'd rather be a mechanic in the shop"- Henry Ford
252646 & 221525. 195897 (Gone, but not forgotten)
252646 & 221525. 195897 (Gone, but not forgotten)
Who is online
Users browsing this forum: farmallcubkid and 42 guests