This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
carb problems
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 94
- Joined: Sun Dec 11, 2011 8:21 pm
- Zip Code: 02835
- eBay ID: crazyjoe1078
- Tractors Owned: 56 cub with fast hitch
one point plow
one point harrow - Circle of Safety: Y
- Location: RHODE ISLAND
carb problems
where can i buy just a throttle shaft or a pin to fix mine ...
-
- Team Cub Mentor
- Posts: 17520
- Joined: Mon Feb 03, 2003 6:45 am
- Zip Code: 21550
- Tractors Owned: "1950 Something" Farmall Cub
1957 Farmall Cub w/FH
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A - Circle of Safety: Y
- Location: MD, Deep Creek Lake
Re: carb problems
How about a little more information about what problems you are having? Even a photo might help. Maybe there's an alternative to replacing the shaft.
-
- 10+ Years
- Posts: 94
- Joined: Sun Dec 11, 2011 8:21 pm
- Zip Code: 02835
- eBay ID: crazyjoe1078
- Tractors Owned: 56 cub with fast hitch
one point plow
one point harrow - Circle of Safety: Y
- Location: RHODE ISLAND
Re: carb problems
where the linkage mounts it spins on the butterfly shaft
-
- Team Cub Mentor
- Posts: 17520
- Joined: Mon Feb 03, 2003 6:45 am
- Zip Code: 21550
- Tractors Owned: "1950 Something" Farmall Cub
1957 Farmall Cub w/FH
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A - Circle of Safety: Y
- Location: MD, Deep Creek Lake
-
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Re: carb problems
The throttle shaft comes in most rebuild kits, but I have never heard of one of them spinning on the shaft. the choke linkage yes, but never the throttle linkage. Depending on whether it is IH or Zenith, some of the members may have a used one from a junked carb. Note, the throttle shaft is the one immediately below the mounting flange. The choke is the one closest to the air inlet.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
-
- 10+ Years
- Posts: 94
- Joined: Sun Dec 11, 2011 8:21 pm
- Zip Code: 02835
- eBay ID: crazyjoe1078
- Tractors Owned: 56 cub with fast hitch
one point plow
one point harrow - Circle of Safety: Y
- Location: RHODE ISLAND
Re: carb problems
John its an IH carb . There is a tiny pin of some sort that holds it on the shaft that little pin fell out of mine don't know where that why i was looking for just the shaft .. I had rebuilt the carb last year and didnt get a new shaft ...
-
- Team Cub Mentor
- Posts: 20395
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: carb problems
Roll pin. Hardware store or nearest tractor dealership.
Should be an easy fix. Checked my stash of carburetors on the shelf. First one I picked up, non IH carb, the lever was attached to the shaft with a small roll pin.
Should be an easy fix. Checked my stash of carburetors on the shelf. First one I picked up, non IH carb, the lever was attached to the shaft with a small roll pin.
I have an excuse. CRS.
-
- Team Cub Mentor
- Posts: 17520
- Joined: Mon Feb 03, 2003 6:45 am
- Zip Code: 21550
- Tractors Owned: "1950 Something" Farmall Cub
1957 Farmall Cub w/FH
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A - Circle of Safety: Y
- Location: MD, Deep Creek Lake
Re: carb problems
I, too, have never seen a Cub IH carburetor throttle shaft with a pin in it. Every one that I have seen or worked with had a square end on the brass shaft that fit into a square hole on the governor linkage plate. Then the brass shaft is peened to lock into the hole. Sometimes that joint can get a little loose. But, it is impossible for it to spin unless the brass shaft is severely worn. You may have something home-brewed or not original to the carb. Can you post a photo?
-
- 10+ Years
- Posts: 94
- Joined: Sun Dec 11, 2011 8:21 pm
- Zip Code: 02835
- eBay ID: crazyjoe1078
- Tractors Owned: 56 cub with fast hitch
one point plow
one point harrow - Circle of Safety: Y
- Location: RHODE ISLAND
Re: carb problems
i will try to get a pic but i fixed it and put it back on the tractor for know with a rollpin
-
- Team Cub Mentor
- Posts: 17520
- Joined: Mon Feb 03, 2003 6:45 am
- Zip Code: 21550
- Tractors Owned: "1950 Something" Farmall Cub
1957 Farmall Cub w/FH
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A - Circle of Safety: Y
- Location: MD, Deep Creek Lake
Re: carb problems
Glad it's working properly for you.
-
- 10+ Years
- Posts: 94
- Joined: Sun Dec 11, 2011 8:21 pm
- Zip Code: 02835
- eBay ID: crazyjoe1078
- Tractors Owned: 56 cub with fast hitch
one point plow
one point harrow - Circle of Safety: Y
- Location: RHODE ISLAND
Re: carb problems
bubble gum fixes everything
-
- Similar Topics
- Replies
- Views
- Last post
-
- 10
- 344
-
by NJ Farmer
Fri May 06, 2022 5:40 pm
-
- 10
- 243
-
by Bob McCarty
Sat Dec 31, 2022 2:44 pm
-
-
Identification of my Engine and Carb - in order to get a new Carb
by JKaechler » Tue Dec 07, 2021 9:25 pm » in Farmall Cub - 14
- 648
-
by Don McCombs
Thu Dec 09, 2021 11:42 am
-
-
- 6
- 175
-
by tst
Fri Dec 23, 2022 10:38 am
-
- 4
- 235
-
by Luke Thomasson
Sun Jul 17, 2022 9:02 am
Who is online
Users browsing this forum: No registered users and 2 guests