This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link:
Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

Ready for Winter

The Cub Club -- Questions and answers to all of your Cub related issues.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
User avatar
Stanton
Cub Pro
Cub Pro
Posts: 7760
Joined: Mon Jun 22, 2009 6:56 am
Zip Code: 64070
Tractors Owned: 1942 Farmall AV, serial #87025
1947 Farmall Circle Cub, serial #2116
1948 Farmall Cub, serial #46066
Circle of Safety: Y
Location: Lone Jack, MO

Ready for Winter

Postby Stanton » Wed Nov 20, 2013 8:53 am

My TC unit was leaking hydro fluid around the control valve. I had used a similar sized o-ring, but apparently, not exactly the right size. Ordered a replacement from TM last week and tore into it over the weekend. Mounted my blade yesterday and reworked some of my gravel driveway. As of now, no leaks. :{_}:

Put the tire chains on before putting her away and, you guessed it: I'm ready for winter.
Stanton
Image Circle of Safety

SPONSOR AD

Sponsor



Sponsor
 

User avatar
Bus Driver
10+ Years
10+ Years
Posts: 2917
Joined: Sat Feb 11, 2006 5:26 pm
Location: NC

Re: Ready for Winter

Postby Bus Driver » Wed Nov 20, 2013 8:13 pm

It is highly likely that you already knew that the composition of the O-ring is crucial in addition to the size. No doubt many of the elastomerics of today were developed after the Cub came along. Not sure what was used originally, perhaps neoprene. Viton would be a good choice for petroleum products that might also be moderately hot, as hydraulic fluid can be. Viton is one of the more expensive materials. O-rings of EPDM are great for plumbing as they resist water and heat well. But they die quickly in the presence of petroleum products. Lots of the hardware store rings are EPDM.
Luck favors those who are prepared

User avatar
ricky racer
10+ Years
10+ Years
Posts: 6313
Joined: Wed Sep 12, 2007 8:40 pm
Zip Code: 49120
Circle of Safety: Y
Location: Niles / Buchanan, Michigan

Re: Ready for Winter

Postby ricky racer » Wed Nov 20, 2013 8:23 pm

Most o-ring these days are made of Buna-N or Viton. Either will work well as the Cub Hydraulics never get that hot. Buna -N has been around for a long time, holds up well in hydraulic oil and is probably what originally came on the Cub.

Mounting the blade and chains is on my Thanksgiving weekend schedule of things to do.
1929 Farmall Regular
1935 John Deere B
1937 John Deere A
1941 John Deere H
1952 John Deere B
1953 Farmall Cub

Bob McCarty
Team Cub
Team Cub
Posts: 11825
Joined: Tue May 25, 2004 8:02 pm
Zip Code: 80501
Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
Circle of Safety: Y
Location: CO, Longmont

Re: Ready for Winter

Postby Bob McCarty » Wed Nov 20, 2013 9:28 pm

Stanton, This is the first year I've had a blade mounted before I needed to use it. Probably won't have enough to plow this year. :( Tonight is predicted to drop 2-4".

Bob
"We don't need to think more,
we need to think differently."
-Albert Einstein

User avatar
randallc
Cub Pro
Cub Pro
Posts: 1906
Joined: Tue Jan 18, 2011 9:16 am
Zip Code: 72940
Tractors Owned: 1951 Farmall Cub, 152 disk plow, 2 gang disk, belly mower, sickle mower
1949 Farmall Cub, cultivator, moldboard plow, disk,front blade. Cub Cadet, LTX1045 Mower. Cub Cadet's 109, 125, 1000, and 1250
1961 cub c2 belly mower and full blade. 48 cub manual lift with cultivators.
1947 Cub
Circle of Safety: Y
Location: Huntington, AR

Re: Ready for Winter

Postby randallc » Thu Nov 21, 2013 6:06 am

Bob, I remember when you said, "it's probably not going to rain cause we hardly ever get rain." What was it, around 12 inches the following week? Maybe you'll at least get enough snow to push it around with the blade.
Guinea, 1951 Farmall Cub; Jumping Willy, 1949 Farmall Cub, 61 Cub, Scrapy, and 48 Cub Al, 48 cub, Billy D.
Image

User avatar
Mr E
Cub Pro
Cub Pro
Posts: 5762
Joined: Mon Jul 30, 2007 11:48 am
Zip Code: 32460
eBay ID: noles1432460
Circle of Safety: Y
Location: FL, Sneads
Contact:

Re: Ready for Winter

Postby Mr E » Thu Nov 21, 2013 7:26 am

randallc wrote:Bob, I remember when you said, "it's probably not going to rain cause we hardly ever get rain." What was it, around 12 inches the following week? Maybe you'll at least get enough snow to push it around with the blade.


Randall,
I suppose you and I and Barnyard was just more than Longmont could handle at one time. It wanted to cleanse itself immediately after we departed. :lol: :lol:
In the middle of every difficulty lies opportunity. - Albert Einstein

Image. Circle of Safety

Roy Edenfield
Deep South CubFest #10
February 14 & 15, 2020

User avatar
Stanton
Cub Pro
Cub Pro
Posts: 7760
Joined: Mon Jun 22, 2009 6:56 am
Zip Code: 64070
Tractors Owned: 1942 Farmall AV, serial #87025
1947 Farmall Circle Cub, serial #2116
1948 Farmall Cub, serial #46066
Circle of Safety: Y
Location: Lone Jack, MO

Re: Ready for Winter

Postby Stanton » Thu Nov 21, 2013 7:48 am

ricky racer wrote:Most o-ring these days are made of Buna-N or Viton. Either will work well as the Cub Hydraulics never get that hot. Buna -N has been around for a long time, holds up well in hydraulic oil and is probably what originally came on the Cub.

Mounting the blade and chains is on my Thanksgiving weekend schedule of things to do.


Thanks Bus Driver and Ricky; not sure what the material was made of, but I'm thinking the size was the critical issue here. The ring I pulled out was just a fraction smaller than the TM one I replaced it with. Checked again Wed night (after working with it Tues) and still dry. So, hope that's the end of the leak.

Funny, I used the same off-the-shelf o-ring in my other Cub TC unit and not a leak at all.

Have a great week!
Stanton
Image Circle of Safety


Return to “Farmall Cub”

Who is online

Users browsing this forum: jobbyjim and 25 guests