This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

New guy with a '48 C and a gauge question

Farmall C, Super C Tractors, 200 & 230 1948-1958
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Post Reply
JaredM
10+ Years
10+ Years
Posts: 2
Joined: Tue Nov 12, 2013 10:27 pm
Zip Code: 00000

New guy with a '48 C and a gauge question

Postby JaredM » Tue Nov 12, 2013 10:35 pm

Hello Everyone, just discovered the board here and have been looking around a bit. Been working on the C for awhile now and getting it back together. It didn't have a temperature gauge on it when I got it, and I am having trouble figuring out where my water temperature gauge goes. I know where the sensor goes, but where does the gauge itself go. Does it fit under the steering in the box, or does it mount to the governor? The parts manual shows a pretty long lead for the sensor, so I don't know about the governor mount.
Top

SPONSOR AD

Sponsor

Sponsor
 
Top
Jim Becker
Team Cub
Team Cub
Posts: 17272
Joined: Sun Feb 02, 2003 2:59 pm
Zip Code: 55319
Circle of Safety: Y
Location: MN

Re: New guy with a '48 C and a gauge question

Postby Jim Becker » Tue Nov 12, 2013 11:20 pm

It goes in the knockout near the ammeter.
Top
User avatar
havoc1482
10+ Years
10+ Years
Posts: 987
Joined: Fri Sep 20, 2013 11:17 am
Zip Code: 01085
eBay ID: havoc1482
Tractors Owned: _______ 1948 Farmall Super A
Circle of Safety: Y
Twitter ID: @havoc1482
Location: Westfield, MA
Contact:
Contact havoc1482

Re: New guy with a '48 C and a gauge question

Postby havoc1482 » Tue Nov 12, 2013 11:22 pm

I've seen it mounted here too. But that could be just because it was aftermarket.
Image

But yes, it goes below the light switch and ammeter. as you can see in this photo:
Image
Mike
Image

I bleed Black & Gold

IH Collectors Club New England (Chapter 18)

Western Mass. (The 413)
Top
JaredM
10+ Years
10+ Years
Posts: 2
Joined: Tue Nov 12, 2013 10:27 pm
Zip Code: 00000

Re: New guy with a '48 C and a gauge question

Postby JaredM » Wed Nov 13, 2013 11:08 am

Thank you so much for the help with this. That was fast. I will post up pictures when we get a little closer to being done.

Thanks
Top
User avatar
Stanton
Cub Pro
Cub Pro
Posts: 7760
Joined: Mon Jun 22, 2009 6:56 am
Zip Code: 64070
Tractors Owned: 1942 Farmall AV, serial #87025
1947 Farmall Circle Cub, serial #2116
1948 Farmall Cub, serial #46066
Circle of Safety: Y
Location: Lone Jack, MO

Re: New guy with a '48 C and a gauge question

Postby Stanton » Wed Nov 13, 2013 1:14 pm

JaredM wrote:Thank you so much for the help with this. That was fast. I will post up pictures when we get a little closer to being done.

Thanks


BTW: Welcome to the forum!
Stanton
Image Circle of Safety
Top
VinceD
10+ Years
10+ Years
Posts: 4587
Joined: Mon Apr 17, 2006 9:17 pm
Zip Code: 65626
Tractors Owned: 1949 Cub "Frodo"
1949 Cub "Sam" (future Project)
1965 Lo-Boy "Pippin"
1940 H "Walter"
1953 SC "Gimli"
Cub Cadet HDS 2155
Circle of Safety: Y
Location: MO, Bakersfield, (South - Central)

Re: New guy with a '48 C and a gauge question

Postby VinceD » Wed Nov 13, 2013 5:44 pm

Welcome to the forum. :D :D
Vince
High atop Hummingbird Hill
In the Missouri Ozarks
Image
Top
CubitisNH
10+ Years
10+ Years
Posts: 565
Joined: Sun May 14, 2006 3:59 pm
Zip Code: 00000
Circle of Safety: Y
Location: Plymouth,NH

Re: New guy with a '48 C and a gauge question

Postby CubitisNH » Wed Nov 13, 2013 8:01 pm

If your C was a Super C,it would have a water pump and a temp guage.
Mike
How can you have too many Cubs????
Top
Post Reply

Return to “Farmall C, Super C, 200 & 230”

Who is online

Users browsing this forum: No registered users and 3 guests