On Rex '48 now that I've put a new lift push-rod on it, it's going to hit the fender when the manual lift rod is pulled the way back. The fenders are new - as in not bent in or out. The rod was purchased from a reputable seller in this forum and is not bent.
Gents, what's the cause and cure - besides bending the rod. Anyone else had this happen?
Ken
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Manual Lift Arm - Will Scrape Fender
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 1475
- Joined: Fri Mar 15, 2013 9:46 pm
- Zip Code: 12009
- eBay ID: kepara
- Tractors Owned: 1929 Farmall Regular #T111250 (Original Owner)
1942 Farmall M #55654
1948 Farmall Cub #21005
1955 Farmall Cub #190769
1961 Cub Cadet #16509
1975 Cub Cadet 1250H
197x IH 990 Haybine
1994 JD 5320 Diesel
Attachments: Woods 42F Fast Hitch, L38 Disc Fast Hitch, F11 Plow Fast Hitch, Land Plow, Snow Plow, Grader Blade, Planter w/Fertilizer, Cultivators, Hilling Disks, Sickle Bar Mower(2), IH 7' Sickle Bar Mower, Flail Mower and 5' International Belly Mower. - Circle of Safety: Y
- Location: Altamont, NY
Manual Lift Arm - Will Scrape Fender
Last edited by PVF1799 on Wed Oct 09, 2013 8:09 pm, edited 1 time in total.
Ken
Pleasant View Farm - Est. 1799
1930 Farmall Restoration Project
My Restoration Project - FCUB '48 - Rex
Pleasant View Farm - Est. 1799
1930 Farmall Restoration Project
My Restoration Project - FCUB '48 - Rex
-
- 10+ Years
- Posts: 2729
- Joined: Sun Oct 03, 2004 7:11 am
- Zip Code: 03848
- eBay ID: panelbeata
- Tractors Owned: 1947 circle cub
1950 cub demonstrator
1957 cub
1967 cub - Circle of Safety: Y
- Location: NH, Kingston
Re: Manual Lift Arm - Will Scrap Fender
i would think you need to tweak the fender a bit, post a pic if you can
-
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Re: Manual Lift Arm - Will Scrape Fender
Let it scrape, it will only remove a little paint each time. At least that is what I did for several years until I got tired of it and bent the rod inward a little.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
-
- 10+ Years
- Posts: 1475
- Joined: Fri Mar 15, 2013 9:46 pm
- Zip Code: 12009
- eBay ID: kepara
- Tractors Owned: 1929 Farmall Regular #T111250 (Original Owner)
1942 Farmall M #55654
1948 Farmall Cub #21005
1955 Farmall Cub #190769
1961 Cub Cadet #16509
1975 Cub Cadet 1250H
197x IH 990 Haybine
1994 JD 5320 Diesel
Attachments: Woods 42F Fast Hitch, L38 Disc Fast Hitch, F11 Plow Fast Hitch, Land Plow, Snow Plow, Grader Blade, Planter w/Fertilizer, Cultivators, Hilling Disks, Sickle Bar Mower(2), IH 7' Sickle Bar Mower, Flail Mower and 5' International Belly Mower. - Circle of Safety: Y
- Location: Altamont, NY
Re: Manual Lift Arm - Will Scrape Fender
Rob, I tweaked the fender a little bit just after I took these photos. Applied a few foot pounds of my mass to the top at the middle. It seems better, but can't fully test right now with the flat belt pulley on. Here's the pictures.
Ken
Ken
Ken
Pleasant View Farm - Est. 1799
1930 Farmall Restoration Project
My Restoration Project - FCUB '48 - Rex
Pleasant View Farm - Est. 1799
1930 Farmall Restoration Project
My Restoration Project - FCUB '48 - Rex
-
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Re: Manual Lift Arm - Will Scrape Fender
Another thing that will help is to put a flat washer or two on the rod between the cotter key and the arm to hold it over a little closer to the arm and away from the fender.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
-
- Team Cub
- Posts: 17278
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: Manual Lift Arm - Will Scrape Fender
Put a flat washer (thickest that will fit) next to the cotter pin at the back end.
-
- Team Cub
- Posts: 9526
- Joined: Wed Jul 26, 2006 10:50 am
- Zip Code: 44057
- Tractors Owned: 57 F-Cub - Dad & Mom's Cub
77 F-Cub - Red Long Stripe - Circle of Safety: Y
- Location: OH, Madison
Re: Manual Lift Arm - Will Scrape Fender
John *.?-!.* cub owner wrote:Another thing that will help is to put a flat washer or two on the rod between the cotter key and the arm to hold it over a little closer to the arm and away from the fender.
Yes, it appears to be a good strong 1/8" gap that could be taken up -- away from the fender.
Bill
-
- 10+ Years
- Posts: 6338
- Joined: Wed Sep 12, 2007 8:40 pm
- Zip Code: 49120
- Circle of Safety: Y
- Location: Niles / Buchanan, Michigan
Re: Manual Lift Arm - Will Scrape Fender
You can also space the fender out with washers.
1929 Farmall Regular
1935 John Deere B
1937 John Deere A
1941 John Deere H
1952 John Deere B
1953 Farmall Cub
1935 John Deere B
1937 John Deere A
1941 John Deere H
1952 John Deere B
1953 Farmall Cub
-
- Similar Topics
- Replies
- Views
- Last post
-
-
C-22 with manual lift practical? Attachment(s)
by inairam » Mon Aug 29, 2022 1:31 pm » in Farmall Cub - 8
- 273
-
by Winfield Dave
Wed Aug 31, 2022 6:28 am
-
-
-
‘49 Cub with manual lift - adjusting the spring
by HiltzMachineWorks » Sun Nov 13, 2022 5:17 pm » in Farmall Cub - 1
- 153
-
by Urbish
Sun Nov 13, 2022 7:29 pm
-
-
-
Parts manual/owners manual for Pennington mower for Farmall Cub
by deissm » Mon Jun 13, 2022 5:22 pm » in Farmall Cub - 2
- 177
-
by deissm
Fri Jun 24, 2022 12:47 pm
-
-
- 0
- 118
-
by Command52
Sun Jun 27, 2021 3:03 pm
-
-
C22 Mower Help (pitman, Knife Clips, Fender Rod)
by jbevard » Mon Mar 18, 2024 9:39 pm » in Farmall Cub - 5
- 234
-
by jbevard
Tue Mar 19, 2024 8:12 pm
-
Who is online
Users browsing this forum: Majestic-12 [Bot] and 5 guests