There is a little sheet metal bracket that I've seen on the cylinder head that the governor control lever runs through. There is a remnant of it on my control lever, but not the part that attaches to the head. I don't see that part in the TC-37-A. TM Tractor doesn't have them listed under engine or governor. Any suggestions?
Ken
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Governor Control Rod Bracket on Head
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- PVF1799
- 10+ Years
- Posts: 1475
- Joined: Fri Mar 15, 2013 9:46 pm
- Zip Code: 12009
- eBay ID: kepara
- Tractors Owned: 1929 Farmall Regular #T111250 (Original Owner)
1942 Farmall M #55654
1948 Farmall Cub #21005
1955 Farmall Cub #190769
1961 Cub Cadet #16509
1975 Cub Cadet 1250H
197x IH 990 Haybine
1994 JD 5320 Diesel
Attachments: Woods 42F Fast Hitch, L38 Disc Fast Hitch, F11 Plow Fast Hitch, Land Plow, Snow Plow, Grader Blade, Planter w/Fertilizer, Cultivators, Hilling Disks, Sickle Bar Mower(2), IH 7' Sickle Bar Mower, Flail Mower and 5' International Belly Mower. - Circle of Safety: Y
- Location: Altamont, NY
- Contact:
Governor Control Rod Bracket on Head
Ken
Pleasant View Farm - Est. 1799
1930 Farmall Restoration Project
My Restoration Project - FCUB '48 - Rex
Pleasant View Farm - Est. 1799
1930 Farmall Restoration Project
My Restoration Project - FCUB '48 - Rex
- Don McCombs
- Team Cub Mentor
- Posts: 17488
- Joined: Mon Feb 03, 2003 6:45 am
- Zip Code: 21550
- Tractors Owned: "1950 Something" Farmall Cub
1957 Farmall Cub w/FH
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A - Circle of Safety: Y
- Location: MD, Deep Creek Lake
Re: Governor Control Rod Bracket on Head
Use one of your 100 cable clips.
Photo courtesy TM Tractor Parts.
Photo courtesy TM Tractor Parts.
- pickerandsinger
- 10+ Years
- Posts: 1501
- Joined: Thu Oct 18, 2012 3:23 pm
- Zip Code: 13143
- Tractors Owned: 1957 Cub Low Boy w/ FH Mott Flail Mower
1953 Cub w/ sprayer and 54A blade (Chompers)
1954 Cub w/fast hitch (Ira)
1948 Cub ( Papa Paul)with Henderson loader..
1951 Mutt mix Cub (BattleAx
1950 Farmall Cub (basket case demo)
Cub parts tractor
2019 " KuB"ota 2601 loader and roto tiller
1951 Ferguson TEA 20 (parts)( Uncle Rusty)
F/H Disc Harrow for cub L-38
C-22 Sickle Bar Mower
IH C2 and C3 mower
Universal tool attachment with disc hillers..Rear cultivators (various tips
York Rake for Cub home made
Single bottom Plow for Cub F194
Gravely 5660 12 hp/ w snoblower.rototiller,bush hog - Circle of Safety: Y
Re: Governor Control Rod Bracket on Head
You probably already know, the gov works a lot better when the rod runs thru it....Did you try JP Salvage..Just a thought or maybe Tim...Oops I guess Don had the answer....
In Memory of 58,286
- PVF1799
- 10+ Years
- Posts: 1475
- Joined: Fri Mar 15, 2013 9:46 pm
- Zip Code: 12009
- eBay ID: kepara
- Tractors Owned: 1929 Farmall Regular #T111250 (Original Owner)
1942 Farmall M #55654
1948 Farmall Cub #21005
1955 Farmall Cub #190769
1961 Cub Cadet #16509
1975 Cub Cadet 1250H
197x IH 990 Haybine
1994 JD 5320 Diesel
Attachments: Woods 42F Fast Hitch, L38 Disc Fast Hitch, F11 Plow Fast Hitch, Land Plow, Snow Plow, Grader Blade, Planter w/Fertilizer, Cultivators, Hilling Disks, Sickle Bar Mower(2), IH 7' Sickle Bar Mower, Flail Mower and 5' International Belly Mower. - Circle of Safety: Y
- Location: Altamont, NY
- Contact:
Re: Governor Control Rod Bracket on Head
JP Tractor had one and I ordered it. Don, I could not bring myself to use one of the 100 clips I bought - I may run out
Ken
Pleasant View Farm - Est. 1799
1930 Farmall Restoration Project
My Restoration Project - FCUB '48 - Rex
Pleasant View Farm - Est. 1799
1930 Farmall Restoration Project
My Restoration Project - FCUB '48 - Rex
- John *.?-!.* cub owner
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Re: Governor Control Rod Bracket on Head
351009R1, page 29 of the TC37A manual (shown with hand throttle and rod).
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
- PVF1799
- 10+ Years
- Posts: 1475
- Joined: Fri Mar 15, 2013 9:46 pm
- Zip Code: 12009
- eBay ID: kepara
- Tractors Owned: 1929 Farmall Regular #T111250 (Original Owner)
1942 Farmall M #55654
1948 Farmall Cub #21005
1955 Farmall Cub #190769
1961 Cub Cadet #16509
1975 Cub Cadet 1250H
197x IH 990 Haybine
1994 JD 5320 Diesel
Attachments: Woods 42F Fast Hitch, L38 Disc Fast Hitch, F11 Plow Fast Hitch, Land Plow, Snow Plow, Grader Blade, Planter w/Fertilizer, Cultivators, Hilling Disks, Sickle Bar Mower(2), IH 7' Sickle Bar Mower, Flail Mower and 5' International Belly Mower. - Circle of Safety: Y
- Location: Altamont, NY
- Contact:
Re: Governor Control Rod Bracket on Head
John *.?-!.* cub owner wrote:351009R1, page 29 of the TC37A manual (shown with hand throttle and rod).
I check and check what I believe to be logical places and always someone with more experience finds it. Thanks John....The learning curve continues!
Ken
Pleasant View Farm - Est. 1799
1930 Farmall Restoration Project
My Restoration Project - FCUB '48 - Rex
Pleasant View Farm - Est. 1799
1930 Farmall Restoration Project
My Restoration Project - FCUB '48 - Rex
- Barnyard
- Team Cub
- Posts: 24271
- Joined: Tue Aug 07, 2007 3:39 pm
- Zip Code: 45030
- Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100 - Circle of Safety: Y
- Location: OH, New Haven (Hamilton County)
- Contact:
Re: Governor Control Rod Bracket on Head
PVF1799 wrote:John *.?-!.* cub owner wrote:351009R1, page 29 of the TC37A manual (shown with hand throttle and rod).
I check and check what I believe to be logical places and always someone with more experience finds it. Thanks John....The learning curve continues!
Ken, here is a page I use a lot of times. I broke it down by the individual component and somethings are duplicated to make it easier such as brakes are listed under both "brakes" and "pedals".
http://savethecub.com/manuals/cub_parts_manual.htm
There are two ways to get enough Cubs. One is to continue to accumulate more and more. The other is to desire less.
Who is online
Users browsing this forum: No registered users and 63 guests