I would like to know where I could get brake lining countersunk for rivets to line my old brake bands . Have two 1948 that need brakes lined
Hope someone can help,Thanks
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Rivet on brake lining
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 59
- Joined: Thu Mar 07, 2013 7:35 pm
- Zip Code: 74604
-
- Team Cub
- Posts: 11860
- Joined: Tue May 25, 2004 8:02 pm
- Zip Code: 80501
- Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
- Circle of Safety: Y
- Location: CO, Longmont
Re: Rivet on brake lining
Robert, Here is a link to a video presentation done by Raymond Durban: viewtopic.php?f=54&t=66324 You have to countersink the rivet holes with ideally a 5/16" forstner bit. Lining and rivets available from McMaster-Carr. After you review the vidoe, ask any questions you might have.
Bob
Bob
"We don't need to think more,
we need to think differently."
-Albert Einstein
we need to think differently."
-Albert Einstein
- Barnyard
- Team Cub
- Posts: 24272
- Joined: Tue Aug 07, 2007 3:39 pm
- Zip Code: 45030
- Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100 - Circle of Safety: Y
- Location: OH, New Haven (Hamilton County)
- Contact:
Re: Rivet on brake lining
There are two ways to get enough Cubs. One is to continue to accumulate more and more. The other is to desire less.
-
- 10+ Years
- Posts: 59
- Joined: Thu Mar 07, 2013 7:35 pm
- Zip Code: 74604
Re: Rivet on brake lining
Thanks I will order lining and rivets today,I have the rivet tool,used it to put linings on old cars and my airplane. Thanks again from Robert St
-
- 10+ Years
- Posts: 414
- Joined: Sun Jul 14, 2013 11:24 pm
- Zip Code: 04730
- Tractors Owned: 1950 Cub...so far
- Location: Houlton, Maine
Re: Rivet on brake lining
I have to stand on my brakes to get the Cub to come to stop so I'm wondering what gaskets I should anticipate needing when I place an order for some new brake bands. Any suggestions would be appreciated.
-
- Team Cub Mentor
- Posts: 5641
- Joined: Thu Aug 03, 2006 6:20 am
- Zip Code: 43358
- Tractors Owned: 48 Cub Diesel (Cubota)
53 Cockshutt 20 restored (Shooter)
52 Cockshutt 20 unrestored
47 Leader "B" (Herckie)
49 Leader "D" (Princess)
49 Leader "D" very rough
48 Leader "D" unrestored
Kubota B6200E
Kubota B6200HST
Kubota B8200HST-D - Circle of Safety: Y
- Location: OH West Mansfield
Re: Rivet on brake lining
Posco, you won't need any gaskets to do a brake replacement but it's a great time to replace any seals in that area that may be leaking. In particular, the differential side bearing seals and the input shaft seal on the final drives. There's much info, here on the forum, about both of the above.
-
- 10+ Years
- Posts: 414
- Joined: Sun Jul 14, 2013 11:24 pm
- Zip Code: 04730
- Tractors Owned: 1950 Cub...so far
- Location: Houlton, Maine
Re: Rivet on brake lining
Gary Dotson wrote:Posco, you won't need any gaskets to do a brake replacement but it's a great time to replace any seals in that area that may be leaking. In particular, the differential side bearing seals and the input shaft seal on the final drives. There's much info, here on the forum, about both of the above.
Thanks, Gary. I haven't had the best of luck narrowing my searches for some reason but i'll make note of the info you gave me when the time comes. I never knew restoring a tractor would be so immensely satisfying.
-
- 10+ Years
- Posts: 59
- Joined: Thu Mar 07, 2013 7:35 pm
- Zip Code: 74604
Re: Rivet on brake lining
I have seals and gaskets allready for one,Will order a set for the tractor I bought for parts PO couldn't get any oil pressure tried to tell him how to prime it He didn't want to fool with it.
He said he had motor rebuilt 9+ years ago ,his son quit mowing with it about 8 years,He couldn't recall for sure but thought it had a PTO problem it does,Has C2 mower on it. Primed thru the oil filter feed hole with 90 Wt cranked it over with starter it pumped oil,Put oil filter back together holds to high side of l on gauge no smoke very smooth put a pony fuel tank on it to start it because of long time it had been setting,To good to part out.!948 model
He said he had motor rebuilt 9+ years ago ,his son quit mowing with it about 8 years,He couldn't recall for sure but thought it had a PTO problem it does,Has C2 mower on it. Primed thru the oil filter feed hole with 90 Wt cranked it over with starter it pumped oil,Put oil filter back together holds to high side of l on gauge no smoke very smooth put a pony fuel tank on it to start it because of long time it had been setting,To good to part out.!948 model