I recently shared the trials and tribulations of the Woods overrunning clutch on my '51 Cub. I replaced a gasket and the broken compression spring and noted an awful lot of metal shavings inside. Anyway, the spring would not stay in place - kept slipping over the ratchets. Since I've never seen the inside of one of these things in good condition, my guess was the entire thing was just worn out. I bought a new one from my local Woods dealer ($417!) and it works great. Here's the problem now: I really, really, really want to take the new one apart to see what it looks like in there. Somebody talk me out of this!
Steve
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Overrunning Clutch Update
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 31
- Joined: Thu Jun 25, 2009 8:13 am
- Zip Code: 23139
- Tractors Owned: 1951 Cub
Woods 42C - Location: Powhatan, Virginia
- Mike in Louisiana
- 10+ Years
- Posts: 7811
- Joined: Tue Feb 15, 2005 10:10 am
- Zip Code: 71023
- Circle of Safety: Y
- Location: LA, Doyline
Re: Overrunning Clutch Update
You are only 75 miles from Boss Hog. I bet he has one you could look at. $417 is a lot of money, you could have gotten a good used one for a lot less. Be sure to check out our sponsors used parts and the wanted section of the forum.
I do abuse my mower all the time and after striped the gears twice i welded them together. Only problem is, if you want to back up you have to wait till the mower stops spinning
I do abuse my mower all the time and after striped the gears twice i welded them together. Only problem is, if you want to back up you have to wait till the mower stops spinning
1975 cub (LouAnn) serial # 245946, 1941 John Deere Model H
Good judgment comes from experience,
and a lot of that comes from bad judgment. Will Rogers
Good judgment comes from experience,
and a lot of that comes from bad judgment. Will Rogers
-
- 10+ Years
- Posts: 31
- Joined: Thu Jun 25, 2009 8:13 am
- Zip Code: 23139
- Tractors Owned: 1951 Cub
Woods 42C - Location: Powhatan, Virginia
Re: Overrunning Clutch Update
Yeah, I knew I was spending big bucks and I did look around a little bit for used. In the end, buying new was fast, easy and the grass was getting pretty high around here. Good idea about Boss Hog. There may be a CubFest in my future.
- Buzzard Wing
- Cub Pro
- Posts: 10540
- Joined: Mon Aug 09, 2004 10:14 pm
- Zip Code: 02840
- Location: RI, Newport
Re: Overrunning Clutch Update
I have 2 Woods 42's and a spare spindle assembly, NONE of them have an overrunning clutch. I do know the IH C-2 mower has a very simple setup with pins and springs, the Woods one looks pretty complex in comparison. Haven't mowed much with the 42's so cannot say how they run without it.
1971 Cub (Rufus) 1950 Cub (Cathy) 1965 Lo Boy Fast Hitch (Nameless III) 1970 Cub 1000 Loader & Fast Hitch (Lee)
- challenger
- 10+ Years
- Posts: 1087
- Joined: Sun Apr 18, 2010 6:22 am
- Zip Code: 21742
- Tractors Owned: 1955 F Cub (2)
1952 F Cub
1948 F Cub
2155 JD
216 JD - Circle of Safety: Y
- Location: Hagerstown MD
Re: Overrunning Clutch Update
I have been inside the clutch. It is not particularly complicated. It is better described as a metal to metal cogged ratchet arrangement that engages only in one direction. On your clutch, the cogs on either or both the pulley side of the ratchet or the spindle side (moveable spring loaded side) may have gotten worn down so the mating cogs no longer engaged properly in the the forward direction under load. Once the ratchet starts slipping in the forward direction over the face of the cogs, they will lose their intended straight or square faced alignment. This could be caused by a broken or weak coil spring or crud in the mechanism preventing the spring from positively pushing or keeping the moveable side of the cogged clutch together with the other mating half when in the engaged forward direction under load.
- Buzzard Wing
- Cub Pro
- Posts: 10540
- Joined: Mon Aug 09, 2004 10:14 pm
- Zip Code: 02840
- Location: RI, Newport
Re: Overrunning Clutch Update
The real early ones just had a sheave (pulley) on top of the cutter shaft, no overrunning clutch. It is a good option.
3 and 3a:
http://www.farmallcub.info/manuals/wood ... e%2009.jpg
http://www.farmallcub.info/manuals/wood ... e%2008.jpg
Overrunning clutch page:
http://www.farmallcub.info/manuals/wood ... e%2012.jpg
3 and 3a:
http://www.farmallcub.info/manuals/wood ... e%2009.jpg
http://www.farmallcub.info/manuals/wood ... e%2008.jpg
Overrunning clutch page:
http://www.farmallcub.info/manuals/wood ... e%2012.jpg
1971 Cub (Rufus) 1950 Cub (Cathy) 1965 Lo Boy Fast Hitch (Nameless III) 1970 Cub 1000 Loader & Fast Hitch (Lee)
-
- 10+ Years
- Posts: 2929
- Joined: Sun Apr 19, 2009 9:51 pm
- Zip Code: 63664
- Location: MO, Potosi
Re: Overrunning Clutch Update
It also needs to be oiled occasionally to "keep a film" on the parts. Over oiling can cause premature wear according to the manual.challenger wrote:I have been inside the clutch. It is not particularly complicated. It is better described as a metal to metal cogged ratchet arrangement that engages only in one direction. On your clutch, the cogs on either or both the pulley side of the ratchet or the spindle side (moveable spring loaded side) may have gotten worn down so the mating cogs no longer engaged properly in the the forward direction under load. Once the ratchet starts slipping in the forward direction over the face of the cogs, they will lose their intended straight or square faced alignment. This could be caused by a broken or weak coil spring or crud in the mechanism preventing the spring from positively pushing or keeping the moveable side of the cogged clutch together with the other mating half when in the engaged forward direction under load.
-
- 5+ Years
- Posts: 1
- Joined: Mon Nov 19, 2018 7:02 pm
- Zip Code: 37876
- Location: Sevierville, TN
Re: Overrunning Clutch Update
Greetings fellow Farmall Cub Fans. I have a '49 model. I grew up with a "47 Cub that my granddad had and missed having one around after he sold the farm. I was reading a post by "Mike in Louisiana" and was wondering about this Boss Hog you mentioned. I am in need of the Overrunning Clutch and have no desire to pay a ton for it. I would only use my mover 3 times a year so... Any help would be great.
-
- 10+ Years
- Posts: 4975
- Joined: Fri Oct 29, 2010 11:34 pm
- Zip Code: 36558
- Tractors Owned: Cubs: (3)'49's, (1 is for parts), (1)'57 IH Cub LoBoy w/FH, (2)154 Number Series Loboys, (1 is for parts), '76 Longstripe w/FH, Mowers: C-22, Bush Hog 412, Pennington 59, Woods RM42CF, Woods 42, assorted FCub plows, planters, discs, etc. OTHERS: '49 AC B & Ind. Sickle mower, '61 AC D12 Ser 2, '52 8N, '56 Ferguson 35 Deluxe, '47 & '49 Avery V, '53 MM BG (offset), '51 JD M (regular), '56 JD 420C, with Blade and fire plow, '85 JD 850 (Yanmar) w/72" belly mower, '76? Yanmar 2TR15 1500 & Bush Hog SQ42S-2 mower, '78? FORD Dexta, '86 FORD LGT14D & 48" Mower, (2)Cub Cadets & Mowers (MTD), (4) Sears Surburban's, other MTD mowers, Jeeps & other misc. "treasures"
- Circle of Safety: Y
- Location: AL (Southwest)
Re: Overrunning Clutch Update
You can probably contact David aka "Boss Hog" by sending him a PM on the forum.
Stan in LA (lower AL)
USAF & Reserves, Reg ARMY, ARMY NG (AL)
USAF & Reserves, Reg ARMY, ARMY NG (AL)
- Dale Finch
- 10+ Years
- Posts: 6645
- Joined: Tue Apr 27, 2010 11:34 am
- Zip Code: 27517
- Tractors Owned: '51 Cub #140966 "Bruno" with Woods 59 mower
'55 Cub #187541 "Betty" with Fast Hitch
'55 Cub #190482 "Ben" with Woods 42 mower
'55 Cub #191739 "Bertha" with Woods 42 mower
'56 Cub #194370 "Boris" with Mott Flail mower - Circle of Safety: Y
- Location: NC, Chapel Hill
Re: Overrunning Clutch Update
Or just put a WANTED ad in the VINE (free classifieds). Several folks have parts mowers.
-
- 10+ Years
- Posts: 2929
- Joined: Sun Apr 19, 2009 9:51 pm
- Zip Code: 63664
- Location: MO, Potosi
Re: Overrunning Clutch Update
Are you trying to repair one and need parts or trying to add one to an existing mower? If the latter, depending on the mower, may not be possible. If there is a version of your mower with a overrunning clutch it would be easier to change the whole spindle. I don't know of any that mount on the PTO shaft for a Cub because of the size and spline count and the fact the Cub PTO turns opposite to about every other PTO known to man.Livintn wrote:......I am in need of the Overrunning Clutch ........
Who is online
Users browsing this forum: Bill V in Md, ricky racer and 28 guests