Still trying to start my Farmall A tractor and while cranking I am getting a small amount of oil coming out of the Air Cleaner pipe.
What would be causing this? I have replaced :
Plugs
Points
Condenser
New plug wires
Rotor
I have spark at the plugs and spark at the magneto coil wire. PLEASE HELP.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Air Cleaner on a Farmall A tractor
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 20
- Joined: Wed Oct 17, 2012 5:02 pm
- Zip Code: 94551
-
- 10+ Years
- Posts: 1631
- Joined: Fri Dec 22, 2006 6:28 am
- Zip Code: 37743
- Circle of Safety: Y
- Location: Tennessee East
Re: Air Cleaner on a Farmall A tractor
Might be a stuck valve. Easy to fix.
47 Cub (Glenda)
52 Super A
62 Cub (Genie)
43 H
42 M
In all things know which way the wind is blowing.
52 Super A
62 Cub (Genie)
43 H
42 M
In all things know which way the wind is blowing.
-
- 10+ Years
- Posts: 20
- Joined: Wed Oct 17, 2012 5:02 pm
- Zip Code: 94551
Re: Air Cleaner on a Farmall A tractor
Thanks DanR for the reply. Next question....how does one unstick a valve?
-
- 10+ Years
- Posts: 1631
- Joined: Fri Dec 22, 2006 6:28 am
- Zip Code: 37743
- Circle of Safety: Y
- Location: Tennessee East
Re: Air Cleaner on a Farmall A tractor
Remove the valve cover and look for the one sticking. Look for a rocker arm that is to far away from the valve. Slide the rocker arm over and spray the valve stem and guide with a penetrate. I use Deep Creep. Let it set awhile and start tapping the valve with a brass hammer. It may take some time so repeat if necessary. When it's free start the engine and see if the valve is getting a good oil flow. Might have been a plugged oil port on the rocker arm. Good time to adjust all the valves.
47 Cub (Glenda)
52 Super A
62 Cub (Genie)
43 H
42 M
In all things know which way the wind is blowing.
52 Super A
62 Cub (Genie)
43 H
42 M
In all things know which way the wind is blowing.
-
- 10+ Years
- Posts: 20
- Joined: Wed Oct 17, 2012 5:02 pm
- Zip Code: 94551
Re: Air Cleaner on a Farmall A tractor
Thanks DanR for the timely information.
Return to “Farmall A, Super A, AV, 100, 130 & 140”
Who is online
Users browsing this forum: No registered users and 9 guests