This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Paint Box
- PVF1799
- 10+ Years
- Posts: 1475
- Joined: Fri Mar 15, 2013 9:46 pm
- Zip Code: 12009
- eBay ID: kepara
- Tractors Owned: 1929 Farmall Regular #T111250 (Original Owner)
1942 Farmall M #55654
1948 Farmall Cub #21005
1955 Farmall Cub #190769
1961 Cub Cadet #16509
1975 Cub Cadet 1250H
197x IH 990 Haybine
1994 JD 5320 Diesel
Attachments: Woods 42F Fast Hitch, L38 Disc Fast Hitch, F11 Plow Fast Hitch, Land Plow, Snow Plow, Grader Blade, Planter w/Fertilizer, Cultivators, Hilling Disks, Sickle Bar Mower(2), IH 7' Sickle Bar Mower, Flail Mower and 5' International Belly Mower. - Circle of Safety: Y
- Location: Altamont, NY
- Contact:
Paint Box
Hi has anyone made painting box?
I've seen some photos and plans on line for small filtered - negative pressure, spray booths.....
Ken
I've seen some photos and plans on line for small filtered - negative pressure, spray booths.....
Ken
Ken
Pleasant View Farm - Est. 1799
1930 Farmall Restoration Project
My Restoration Project - FCUB '48 - Rex
Pleasant View Farm - Est. 1799
1930 Farmall Restoration Project
My Restoration Project - FCUB '48 - Rex
- gitractorman
- 10+ Years
- Posts: 2679
- Joined: Mon Oct 24, 2005 11:35 am
- Zip Code: 14072
- eBay ID: toysforjake
- Tractors Owned: Lots of Cub Cadets!
1951 Farmall Cub
1977 IH Cub
1966 IH Cub
1965 IH Lo Boy
1964 IH Lo Boy
1949 Farmall Cub
Several IH 154 Lo Boys
1979 IH 184 Lo Boy
Simplicity 4416 Sovereign
Simplicity Conquest
Simplicity Legacy 4x4 Diesel
Mitsubishi MT180D 4x4 Diesel - Circle of Safety: Y
- Location: Grand Island, NY
Re: Paint Box
Ken,
I've not seen a small box, but I made a paint booth in my garage that worked really well. At Rockler Woodworking, they sell these telescoping poles with rubber feet, that you can use to lift polyethylene sheet up to the cieling and clamp in place to make walls. I used 4 of these, made a booth against an outside wall of my garage where there was a double-hung window. In the window I placed a box fan, blowing outward. The booth was big enough to fit the Cub inside, and I left the bottom of the sheeting loose enough so that makeup air came in through the bottom. All the fumes went out the box fan. Worked excellent!. No mess in the garage, a tarp on the floor so no overspray on the floor, and when I was all done, dropped the poly walls, and had my full garage back in service.
Sorry, I never grabbed any pics.
Hey, btw, out in your neck of the woods today, well kind of. Sitting in our Syracuse office now, headed up to Watertown for a meeting this morning, then back to Buffalo this afternoon. Yea, it's one of "those" days. Left home at 5:00 this morning and hope to be home by 5:00 tonight.
Bill
I've not seen a small box, but I made a paint booth in my garage that worked really well. At Rockler Woodworking, they sell these telescoping poles with rubber feet, that you can use to lift polyethylene sheet up to the cieling and clamp in place to make walls. I used 4 of these, made a booth against an outside wall of my garage where there was a double-hung window. In the window I placed a box fan, blowing outward. The booth was big enough to fit the Cub inside, and I left the bottom of the sheeting loose enough so that makeup air came in through the bottom. All the fumes went out the box fan. Worked excellent!. No mess in the garage, a tarp on the floor so no overspray on the floor, and when I was all done, dropped the poly walls, and had my full garage back in service.
Sorry, I never grabbed any pics.
Hey, btw, out in your neck of the woods today, well kind of. Sitting in our Syracuse office now, headed up to Watertown for a meeting this morning, then back to Buffalo this afternoon. Yea, it's one of "those" days. Left home at 5:00 this morning and hope to be home by 5:00 tonight.
Bill
Cub Cadets 682, 1811, 1864, Simplicity Legacy XL 4x4 Diesel with FEL, 60" mower, 50" Tiller
- Barnyard
- Team Cub
- Posts: 24265
- Joined: Tue Aug 07, 2007 3:39 pm
- Zip Code: 45030
- Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100 - Circle of Safety: Y
- Location: OH, New Haven (Hamilton County)
- Contact:
Re: Paint Box
Here is one Butch Zell built several years ago. viewtopic.php?f=1&t=28699&hilit=paint+booth
There are two ways to get enough Cubs. One is to continue to accumulate more and more. The other is to desire less.
-
- 10+ Years
- Posts: 2929
- Joined: Sun Apr 19, 2009 9:51 pm
- Zip Code: 63664
- Location: MO, Potosi
Re: Paint Box
By paint box are you refering to something small (like a sand blast cabinet) to paint in with out getting inside like you would with a paint booth?
- PVF1799
- 10+ Years
- Posts: 1475
- Joined: Fri Mar 15, 2013 9:46 pm
- Zip Code: 12009
- eBay ID: kepara
- Tractors Owned: 1929 Farmall Regular #T111250 (Original Owner)
1942 Farmall M #55654
1948 Farmall Cub #21005
1955 Farmall Cub #190769
1961 Cub Cadet #16509
1975 Cub Cadet 1250H
197x IH 990 Haybine
1994 JD 5320 Diesel
Attachments: Woods 42F Fast Hitch, L38 Disc Fast Hitch, F11 Plow Fast Hitch, Land Plow, Snow Plow, Grader Blade, Planter w/Fertilizer, Cultivators, Hilling Disks, Sickle Bar Mower(2), IH 7' Sickle Bar Mower, Flail Mower and 5' International Belly Mower. - Circle of Safety: Y
- Location: Altamont, NY
- Contact:
Re: Paint Box
Yes - I am interested in being able to paint smaller parts inside the garage, yet exahust the air outside.
Ken
Ken
Ken
Pleasant View Farm - Est. 1799
1930 Farmall Restoration Project
My Restoration Project - FCUB '48 - Rex
Pleasant View Farm - Est. 1799
1930 Farmall Restoration Project
My Restoration Project - FCUB '48 - Rex
-
- 10+ Years
- Posts: 2929
- Joined: Sun Apr 19, 2009 9:51 pm
- Zip Code: 63664
- Location: MO, Potosi
Re: Paint Box
I'm sure you have an idea of what you're talking about but I'm still trying to understand the size of what you are calling a "paint box". Are you wanting to be inside the box with the item you're painting or do you put the part inside and you stay outside in clean air and have hand holes to reach in like a sand blaster cabinet?PVF1799 wrote:Yes - I am interested in being able to paint smaller parts inside the garage, yet exahust the air outside.
Ken
- PVF1799
- 10+ Years
- Posts: 1475
- Joined: Fri Mar 15, 2013 9:46 pm
- Zip Code: 12009
- eBay ID: kepara
- Tractors Owned: 1929 Farmall Regular #T111250 (Original Owner)
1942 Farmall M #55654
1948 Farmall Cub #21005
1955 Farmall Cub #190769
1961 Cub Cadet #16509
1975 Cub Cadet 1250H
197x IH 990 Haybine
1994 JD 5320 Diesel
Attachments: Woods 42F Fast Hitch, L38 Disc Fast Hitch, F11 Plow Fast Hitch, Land Plow, Snow Plow, Grader Blade, Planter w/Fertilizer, Cultivators, Hilling Disks, Sickle Bar Mower(2), IH 7' Sickle Bar Mower, Flail Mower and 5' International Belly Mower. - Circle of Safety: Y
- Location: Altamont, NY
- Contact:
Re: Paint Box
Scrivet wrote:I'm sure you have an idea of what you're talking about but I'm still trying to understand the size of what you are calling a "paint box". Are you wanting to be inside the box with the item you're painting or do you put the part inside and you stay outside in clean air and have hand holes to reach in like a sand blaster cabinet?PVF1799 wrote:Yes - I am interested in being able to paint smaller parts inside the garage, yet exahust the air outside.
Ken
I'm looking to see if anyone has built anything like this?
http://www.hiroboy.com/catalog/product_info.php?currency=PLN&products_id=3466&osCsid=b77f6954a6c4fee128e96339fc4f04d7#.UbTD0FK9KSM
Ken
Pleasant View Farm - Est. 1799
1930 Farmall Restoration Project
My Restoration Project - FCUB '48 - Rex
Pleasant View Farm - Est. 1799
1930 Farmall Restoration Project
My Restoration Project - FCUB '48 - Rex
- bob in CT
- Team Cub Mentor
- Posts: 6018
- Joined: Thu Jun 07, 2007 9:34 am
- Zip Code: 06040
- Tractors Owned: 77 Cub (red); 74 Cub; 52 Cub; 50 Cub ( post-demo)
- Circle of Safety: Y
- Location: CT, Manchester
Re: Paint Box
Frankly, this looks like a waste of time unless you are setting up with an airbrush to paint models. I am not that good of a painter nor do I have professional racks. I need a bit of walking around room to make sure I hit all the angles, even for small parts. Even then, something always seems to end back on the rack hanging a different way. The parts of the job I don't like are the mixing and cleaning of the equipment. I like to get as much done in each in-between to minimize the number of sessions.
-
- 10+ Years
- Posts: 2929
- Joined: Sun Apr 19, 2009 9:51 pm
- Zip Code: 63664
- Location: MO, Potosi
Re: Paint Box
OK got it now! I'm with Bob I think clean up would be the killer for small jobs. Would work a lot better with rattle cans. It doesn't look that hard to make to try, a couple pieces plywood, left over paneling, card board box, or an old washing machine or dryer if you want bigger, for the sides. A lazy suzan from the cupboard or the spinner off an old swivel chair. A furnace filter. It says 60-68CFM fan. The cheap $15 dollar bathroom exhaust fans do about 50CFM, splurge and put two in. Some plastic dryer vent hose that shouldn't be used on a dryer and you'll be painting in no time.
If you have a little room on an outside wall do away with the hose and mount a storage cabinet with the fans installed in one shelf bay. When you want to paint open the cabinet doors and paint. You could install a light or two or get the fancier exhaust fans with a light. When done close the door. The rest of the cabinet could be rattle can storage.
If you have a little room on an outside wall do away with the hose and mount a storage cabinet with the fans installed in one shelf bay. When you want to paint open the cabinet doors and paint. You could install a light or two or get the fancier exhaust fans with a light. When done close the door. The rest of the cabinet could be rattle can storage.
- Rudi
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
- Contact:
Re: Paint Box
Ken:
That is a total waste of time and money unless what you are painting is model airplanes, model trains etc., and using an airbrush or the small touch up guns. It doesn't matter what you are spraying adequate ventilation is key. That unit will not provide it. I do like however Butch Zell's take on a temporary paint booth. Armed with that, an external air supply unit like Bob has (I think you ordered one) and adequate coveralls you should be able to pull off a really good paint job with minimal risk to your health.
I have been finishing for almost 50 years or so and even though finishing and my woodwork is not the cause of my COPD, PF or Pulmonary Hypertension, I can tell you that many folks who do not use the proper equipment will end up with respiratory illness and it does not take too long. And for those of you who remember my favourite mentor, Mr. George Willer would second this and second it emphatically. Safety is paramount.
I haven't said much about this for the last couple of months but my health has deteriorated and for the last month or so, I have been tied completely to either a concentrator or O2 tanks. You DO NOT want this, that I can guarantee. So do yourself a favour and take the time to erect something like Butch built. Home built doesn't mean non-professional, it just means that you built it at home. How good it is, well that is entirely up to you. Think about your health first, you won't regret it.
Oh, I don't mean to sound preachy ok... just sayin how it is or can be.
That is a total waste of time and money unless what you are painting is model airplanes, model trains etc., and using an airbrush or the small touch up guns. It doesn't matter what you are spraying adequate ventilation is key. That unit will not provide it. I do like however Butch Zell's take on a temporary paint booth. Armed with that, an external air supply unit like Bob has (I think you ordered one) and adequate coveralls you should be able to pull off a really good paint job with minimal risk to your health.
I have been finishing for almost 50 years or so and even though finishing and my woodwork is not the cause of my COPD, PF or Pulmonary Hypertension, I can tell you that many folks who do not use the proper equipment will end up with respiratory illness and it does not take too long. And for those of you who remember my favourite mentor, Mr. George Willer would second this and second it emphatically. Safety is paramount.
I haven't said much about this for the last couple of months but my health has deteriorated and for the last month or so, I have been tied completely to either a concentrator or O2 tanks. You DO NOT want this, that I can guarantee. So do yourself a favour and take the time to erect something like Butch built. Home built doesn't mean non-professional, it just means that you built it at home. How good it is, well that is entirely up to you. Think about your health first, you won't regret it.
Oh, I don't mean to sound preachy ok... just sayin how it is or can be.
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
- allenlook
- Cub Pro
- Posts: 1795
- Joined: Sat Jul 31, 2004 10:37 pm
- Zip Code: 12020
- Location: NY, Saratoga Springs
- Contact:
Re: Paint Box
I did set up a temporary paint box, Ken. I used several shipping boxes duct-taped together into a "tunnel" just the size of a window box fan, then set it in the doorway when I painted small parts. I wish I'd had a bigger one when I did the hood, because the whole floor got a red tint to it despite my efforts to cover it - that was a lot of rattle-can red and it went pretty much everywhere.
It wore off after a few years, though.
It wore off after a few years, though.
Searchable Cub Parts Database and Manual Galleries at www.farmallcub.info - Computerized Carving at www.bitcarving.com
- gitractorman
- 10+ Years
- Posts: 2679
- Joined: Mon Oct 24, 2005 11:35 am
- Zip Code: 14072
- eBay ID: toysforjake
- Tractors Owned: Lots of Cub Cadets!
1951 Farmall Cub
1977 IH Cub
1966 IH Cub
1965 IH Lo Boy
1964 IH Lo Boy
1949 Farmall Cub
Several IH 154 Lo Boys
1979 IH 184 Lo Boy
Simplicity 4416 Sovereign
Simplicity Conquest
Simplicity Legacy 4x4 Diesel
Mitsubishi MT180D 4x4 Diesel - Circle of Safety: Y
- Location: Grand Island, NY
Re: Paint Box
Tell you what, I've painted a LOT of Cub and Cub Cadet parts. A couple of step ladders and some wire works really well for painting small parts. I almost always paint outside. Just wait for a nice day and go to work. There's almost no mess to clean up and in all the things I've painted, I don't think I've ever had a problem with a bug or dirt in the paint. At least, not anything that I was concerned about. One time I even prepped a whole Cub, put it on my 16' trailer on top of a tarp, then rolled it out back to paint. That was the BEST! No mess at all to clean up. Wife caught me in the act of "reassembly". I figured it was already on jack stands, just a little higher and I could slap the wheels on and roll her right off the trailer. Worked pretty good!
Cub Cadets 682, 1811, 1864, Simplicity Legacy XL 4x4 Diesel with FEL, 60" mower, 50" Tiller
- Don McCombs
- Team Cub Mentor
- Posts: 17477
- Joined: Mon Feb 03, 2003 6:45 am
- Zip Code: 21550
- Tractors Owned: "1950 Something" Farmall Cub
1957 Farmall Cub w/FH
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A - Circle of Safety: Y
- Location: MD, Deep Creek Lake
Re: Paint Box
I'm with Bill on this one. I do all of my parts painting outside, or nearly outside. Ladders, tubing and hooks for the good weather. If it is warm, but raining a little, I open the garage door and hang hooks from the garage door tracks.
- PVF1799
- 10+ Years
- Posts: 1475
- Joined: Fri Mar 15, 2013 9:46 pm
- Zip Code: 12009
- eBay ID: kepara
- Tractors Owned: 1929 Farmall Regular #T111250 (Original Owner)
1942 Farmall M #55654
1948 Farmall Cub #21005
1955 Farmall Cub #190769
1961 Cub Cadet #16509
1975 Cub Cadet 1250H
197x IH 990 Haybine
1994 JD 5320 Diesel
Attachments: Woods 42F Fast Hitch, L38 Disc Fast Hitch, F11 Plow Fast Hitch, Land Plow, Snow Plow, Grader Blade, Planter w/Fertilizer, Cultivators, Hilling Disks, Sickle Bar Mower(2), IH 7' Sickle Bar Mower, Flail Mower and 5' International Belly Mower. - Circle of Safety: Y
- Location: Altamont, NY
- Contact:
Re: Paint Box
gitractorman wrote:Tell you what, I've painted a LOT of Cub and Cub Cadet parts. A couple of step ladders and some wire works really well for painting small parts. I almost always paint outside. Just wait for a nice day and go to work. There's almost no mess to clean up and in all the things I've painted, I don't think I've ever had a problem with a bug or dirt in the paint. At least, not anything that I was concerned about. One time I even prepped a whole Cub, put it on my 16' trailer on top of a tarp, then rolled it out back to paint. That was the BEST! No mess at all to clean up. Wife caught me in the act of "reassembly". I figured it was already on jack stands, just a little higher and I could slap the wheels on and roll her right off the trailer. Worked pretty good!
Like you've I've painting all my small parts outside. In my quest for a safe small spray booth for rattle can spraying, especially for winter and when the weather sucks so bad like it has lately. Small is defined as perhaps just big enough to spray something like the wire mesh grill and all parts smaller than that. My next project is my 1960 Cub Cadet - Lots of small parts there. The quest continues.
On your photo, did you spray that rattle cans or a HVLP sprayer, fully assembled like that. The reason I'm asking is - 1, I've done anything like that and 2, how do you get the paint everywhere needed to get a nice job, w/o runs?
Ken
Pleasant View Farm - Est. 1799
1930 Farmall Restoration Project
My Restoration Project - FCUB '48 - Rex
Pleasant View Farm - Est. 1799
1930 Farmall Restoration Project
My Restoration Project - FCUB '48 - Rex
Who is online
Users browsing this forum: No registered users and 8 guests