This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Woods 42F (Fasthitch version) shaft
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- Dale Finch
- 10+ Years
- Posts: 6682
- Joined: Tue Apr 27, 2010 11:34 am
- Zip Code: 27517
- Tractors Owned: '51 Cub #140966 "Bruno" with Woods 59 mower
'55 Cub #187541 "Betty" with Fast Hitch
'55 Cub #190482 "Ben" with Woods 42 mower
'55 Cub #191739 "Bertha" with Woods 42 mower
'56 Cub #194370 "Boris" with Mott Flail mower - Circle of Safety: Y
- Location: NC, Chapel Hill
Woods 42F (Fasthitch version) shaft
As I have mentioned before, I am looking for a Front Universal Shaft for my Woods 42F (Fasthitch) Mower (item #2 page :
http://www.cleancomputes.com/Cub/OEM%20Implement%20and%20Attachment%20Manuals/Woods%20Mower%20Manuals/PDFs/Woods%2042%20F-4%20for%20Farmall%20Cub%20with%20Fast%20Hitch/Woods%2042%20F-4%20for%20Farmall%20Cub%20with%20Fast%20Hitch.pdf
I know in an earlier post, someone mentioned that they had fabricated this, and unless someone has one they would be willing to sell, it looks like I too will have to fabricate one. Is there anyone who has specs on this shaft (the manual only shows a line drawing) or who would be willing to loan theirs to me (I will be at Boss' VA Fest)? At the very least, perhaps someone could take detailed photos with measurements?
Also, I have NO idea where the various pieces might be purchased, such as the splined female PTO end, so that information would be great!
Thanks for any help.
http://www.cleancomputes.com/Cub/OEM%20Implement%20and%20Attachment%20Manuals/Woods%20Mower%20Manuals/PDFs/Woods%2042%20F-4%20for%20Farmall%20Cub%20with%20Fast%20Hitch/Woods%2042%20F-4%20for%20Farmall%20Cub%20with%20Fast%20Hitch.pdf
I know in an earlier post, someone mentioned that they had fabricated this, and unless someone has one they would be willing to sell, it looks like I too will have to fabricate one. Is there anyone who has specs on this shaft (the manual only shows a line drawing) or who would be willing to loan theirs to me (I will be at Boss' VA Fest)? At the very least, perhaps someone could take detailed photos with measurements?
Also, I have NO idea where the various pieces might be purchased, such as the splined female PTO end, so that information would be great!
Thanks for any help.
-
- 10+ Years
- Posts: 398
- Joined: Tue Nov 30, 2010 7:54 pm
- Zip Code: 23027
- Circle of Safety: Y
Re: Woods 42F (Fasthitch version) shaft
Dale, I will be at Boss's and could throw mine on the trailer if you would like to take pictures and measurements from it. It's a woods RM 42 but the shafts should be the same.
-
- Team Cub Mentor
- Posts: 5640
- Joined: Thu Aug 03, 2006 6:20 am
- Zip Code: 43358
- Tractors Owned: 48 Cub Diesel (Cubota)
53 Cockshutt 20 restored (Shooter)
52 Cockshutt 20 unrestored
47 Leader "B" (Herckie)
49 Leader "D" (Princess)
49 Leader "D" very rough
48 Leader "D" unrestored
Kubota B6200E
Kubota B6200HST
Kubota B8200HST-D - Circle of Safety: Y
- Location: OH West Mansfield
Re: Woods 42F (Fasthitch version) shaft
Dale, you might want to PM Rick Prentice, he had to scrounge PTO shaft parts, when he built the dyno. Once you have the info, a good driveline shop should be able to help put it together.
- Dale Finch
- 10+ Years
- Posts: 6682
- Joined: Tue Apr 27, 2010 11:34 am
- Zip Code: 27517
- Tractors Owned: '51 Cub #140966 "Bruno" with Woods 59 mower
'55 Cub #187541 "Betty" with Fast Hitch
'55 Cub #190482 "Ben" with Woods 42 mower
'55 Cub #191739 "Bertha" with Woods 42 mower
'56 Cub #194370 "Boris" with Mott Flail mower - Circle of Safety: Y
- Location: NC, Chapel Hill
Re: Woods 42F (Fasthitch version) shaft
Chris D wrote:Dale, I will be at Boss's and could throw mine on the trailer if you would like to take pictures and measurements from it. It's a woods RM 42 but the shafts should be the same.
Chris, that would be great! And I promise not to steal it!!!
Gary Dotson wrote:Dale, you might want to PM Rick Prentice, he had to scrounge PTO shaft parts, when he built the dyno. Once you have the info, a good driveline shop should be able to help put it together.
I definitely will contact him if he doesn't chime in here. And is "drive line shop" the right term for where I would go for help with this?Thanks for the suggestion.
Any other ideas/offers? I already have done the first mowing with the regular Woods 42 on my '53, but after reworking and installing this fasthitch assembly, I want to use it!!
Last edited by Dale Finch on Tue Apr 23, 2013 7:30 pm, edited 2 times in total.
- Rick Prentice
- Team Cub Guide
- Posts: 5636
- Joined: Mon Nov 01, 2004 7:24 am
- Zip Code: 43528
- Tractors Owned: 47(circle cub),48(Floyd backhoe),49,,51,54 and another 55
- Circle of Safety: Y
- Location: OH, Holland
- Contact:
Re: Woods 42F (Fasthitch version) shaft
Hi Dale. I saw your PM and then saw this post. Here's a copy of my PM to you so others can also read it. Sorry so late. My little mini laptop has been acting up and it just came back to me from the Texas HP repairshop
Rick
Rick
Hi Dale. To answer one question you have----no, I don't have anything right now. I actually need to find a front shaft for my IH tiller that I own, but my remaining back half has a bigger multiple spline setup and I can't find any anyplace. I do know you can order the yoke that slips onto the cub pto from a Woods dealer. I ordered one when I built the dyno. I had a local truck shop make a driveshaft with the ends all welded and balanced to 3000 rpm's and that was very expensive($340). I'd say your best shot is placing a wanted ad for the part you need. Someone has a extra laying around and will eventually come forward. The Toledo based shop that made my shaft was "Fleet Pride". It's a big truck outfit that services brakes, driveshafts, clutches, transmissions, etc. Good luck. If I run across anything, I'll let you know.
Rick
When I told my dad I've been misplacing things and doing stupid stuff----His reply---"It only gets better"
-
- 10+ Years
- Posts: 111
- Joined: Sat Mar 09, 2013 8:14 pm
- Zip Code: 39338
- eBay ID: dbboss
- Tractors Owned: '63 Massey Ferguson 35 diesel deluxe
'50 Farmall Cub
Re: Woods 42F (Fasthitch version) shaft
I've always heard them called driveline shops. Never heard of a drilling shop. We have several in the area, and a couple even have driveline in the name. Wansley Machine & Driveline is one near me in Ellisville, MS. If nothing else they may answer some of your questions. If they have measurements, they can build it. Now as for the cost, no telling. Depends if they have it on the shelf or have to build it.
- Dale Finch
- 10+ Years
- Posts: 6682
- Joined: Tue Apr 27, 2010 11:34 am
- Zip Code: 27517
- Tractors Owned: '51 Cub #140966 "Bruno" with Woods 59 mower
'55 Cub #187541 "Betty" with Fast Hitch
'55 Cub #190482 "Ben" with Woods 42 mower
'55 Cub #191739 "Bertha" with Woods 42 mower
'56 Cub #194370 "Boris" with Mott Flail mower - Circle of Safety: Y
- Location: NC, Chapel Hill
Re: Woods 42F (Fasthitch version) shaft
dbboss, that "drilling shop" was due to my phone auto-finishing and my poor proofreading!!! I went back and corrected it...thanks!
As soon as I have access to my computer, I will research these suggestions. I thank you for your advice and welcome it! Will fill you in on my results as I get more information.
As soon as I have access to my computer, I will research these suggestions. I thank you for your advice and welcome it! Will fill you in on my results as I get more information.
-
- 10+ Years
- Posts: 5212
- Joined: Tue Jan 12, 2010 2:08 pm
- Zip Code: 12514
- Circle of Safety: Y
Re: Woods 42F (Fasthitch version) shaft
hi Dale, i have one that i made a couple years back, i bought the spline coupler and,slip joints, yokes from a company called Weaver, you can probably find them on the net, i think between the yokes,coupler,tubing & u joints i spent $150 and a few hours to make
Tim
Tim
- Dale Finch
- 10+ Years
- Posts: 6682
- Joined: Tue Apr 27, 2010 11:34 am
- Zip Code: 27517
- Tractors Owned: '51 Cub #140966 "Bruno" with Woods 59 mower
'55 Cub #187541 "Betty" with Fast Hitch
'55 Cub #190482 "Ben" with Woods 42 mower
'55 Cub #191739 "Bertha" with Woods 42 mower
'56 Cub #194370 "Boris" with Mott Flail mower - Circle of Safety: Y
- Location: NC, Chapel Hill
Re: Woods 42F (Fasthitch version) shaft
tst wrote:hi Dale, i have one that i made a couple years back, i bought the spline coupler and,slip joints, yokes from a company called Weaver, you can probably find them on the net, i think between the yokes,coupler,tubing & u joints i spent $150 and a few hours to make
Tim
Tim, I was pretty sure that someone had posted having done this. As I look into this I may contact you for help, if that's OK? Oh, how did it do...OK?! Thanks.
-
- 10+ Years
- Posts: 5212
- Joined: Tue Jan 12, 2010 2:08 pm
- Zip Code: 12514
- Circle of Safety: Y
Re: Woods 42F (Fasthitch version) shaft
works fine, still using it, did you have any parts of the old shaft or is it all missing?
-
- 10+ Years
- Posts: 4948
- Joined: Tue Jun 08, 2004 3:04 pm
- Zip Code: 14559
- Circle of Safety: Y
- Location: Rochester, NY
Re: Woods 42F (Fasthitch version) shaft
Weaver, or WEASLER?
Weasler is a company that makes PTO shafts and components.
Weasler is a company that makes PTO shafts and components.
-
- 10+ Years
- Posts: 5212
- Joined: Tue Jan 12, 2010 2:08 pm
- Zip Code: 12514
- Circle of Safety: Y
Re: Woods 42F (Fasthitch version) shaft
Thanks Matt, you are correct, guess the CRS is getting worse
Tim
Tim
-
- 10+ Years
- Posts: 4948
- Joined: Tue Jun 08, 2004 3:04 pm
- Zip Code: 14559
- Circle of Safety: Y
- Location: Rochester, NY
Re: Woods 42F (Fasthitch version) shaft
Just found a Weasler catalog. I think this is the part you need for the PTO shaft on the Cub:
1050610 AE00005 Tractor Yoke Spring-Lok Quick Connect .98” x 10 Spline
1050610 AE00005 Tractor Yoke Spring-Lok Quick Connect .98” x 10 Spline
- Dale Finch
- 10+ Years
- Posts: 6682
- Joined: Tue Apr 27, 2010 11:34 am
- Zip Code: 27517
- Tractors Owned: '51 Cub #140966 "Bruno" with Woods 59 mower
'55 Cub #187541 "Betty" with Fast Hitch
'55 Cub #190482 "Ben" with Woods 42 mower
'55 Cub #191739 "Bertha" with Woods 42 mower
'56 Cub #194370 "Boris" with Mott Flail mower - Circle of Safety: Y
- Location: NC, Chapel Hill
Re: Woods 42F (Fasthitch version) shaft
tst wrote:works fine, still using it, did you have any parts of the old shaft or is it all missing?
The only thing I have is the splined shaft with a u-joint attached to the mower. It will probably have to be next week before I get to persue this. The grass has grown like crazy at the farm and I have too much to do this weekend without internet connection. My research on this will continue...
Thanks!
- Dale Finch
- 10+ Years
- Posts: 6682
- Joined: Tue Apr 27, 2010 11:34 am
- Zip Code: 27517
- Tractors Owned: '51 Cub #140966 "Bruno" with Woods 59 mower
'55 Cub #187541 "Betty" with Fast Hitch
'55 Cub #190482 "Ben" with Woods 42 mower
'55 Cub #191739 "Bertha" with Woods 42 mower
'56 Cub #194370 "Boris" with Mott Flail mower - Circle of Safety: Y
- Location: NC, Chapel Hill
Re: Woods 42F (Fasthitch version) shaft
Chris D wrote:Dale, I will be at Boss's and could throw mine on the trailer if you would like to take pictures and measurements from it. It's a woods RM 42 but the shafts should be the same.
Hey there! Just a few days before the VA Fest and I wanted to remind you to throw that FH shaft into your car before you head out! (assuming you are still willing to let me get my hands on it!!)
Looking forward to all the fun! See you there. I'll be the one with a '52 getting a new front transmission seal , so feel free to jump in and help!
Who is online
Users browsing this forum: No registered users and 55 guests