This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
154 exhaust manifold removal
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 1
- Joined: Sat May 04, 2013 12:33 pm
- Zip Code: 43315
154 exhaust manifold removal
I just bought a 154 and i need to replace the exhaust manifold. i was able to remove the 2 end nuts but i cant get any of my sockets or wrenches in to remove the 2 middle nuts....is there a special too i need?
-
- 10+ Years
- Posts: 439
- Joined: Mon Jun 29, 2009 8:20 am
- Zip Code: 71836
- Tractors Owned: 49 cub buttercup
- Circle of Safety: Y
- Location: foreman ar.
Re: 154 exhaust manifold removal
i took mind off with a box end wrench, it's close but it can be done. good luck. tomcat
-
- 10+ Years
- Posts: 1189
- Joined: Sat May 14, 2011 6:09 pm
- Zip Code: 15132
- Tractors Owned: 53 F Cub
73 F Cub
53 Super A With Snow/Grader Blade
193 Plow With Colter And Jointer
144 Cultivators
22 Mower - Circle of Safety: Y
- Location: Versailles,Pa.
Re: 154 exhaust manifold removal
I used a box end on one, and a crows foot on the other.
Know Your Cub, And Your Cub Will Know You.
Tom
Tom
-
- Cub Pro
- Posts: 1741
- Joined: Tue Jul 18, 2006 9:55 pm
- Zip Code: 37087
- Tractors Owned: 1947 Cub S/N 9216
w/ C-22 Mower
1974 Cub S/N 244814
w/59 Woods Mower
Ford 3000 Gas S/N C375091 w/Bushhog QT2345 Loader & 6' Squealer Bushhog
and a Palomino Mare named GIGI - Circle of Safety: Y
- Location: TN, Lebanon
Re: 154 exhaust manifold removal
The best wrench that I use for the inside nuts is a 9/16 "offset" boxend that was in my dad's collection. You don't see these old style wrenches anymore.
"Courage is being scared to death-but saddling up anyway".......John Wayne
-
- 10+ Years
- Posts: 4113
- Joined: Thu Nov 09, 2006 11:26 pm
- Zip Code: 61722
Re: 154 exhaust manifold removal
My dad had a couple of wrenches that he called "half moon", and used them for manifold and starter, etc. work! thanks; sonny
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Manifold bolt hole into water jacket?
by seahaul » Sat Oct 23, 2021 9:41 am » in Lo-Boy Series - 154, 184, 185 - 2
- 366
-
by outdoors4evr
Mon Oct 25, 2021 6:40 am
-
-
-
PTO Shaft Removal on 184
by JacktheWindy » Mon Aug 28, 2023 9:42 pm » in Lo-Boy Series - 154, 184, 185 - 0
- 805
-
by JacktheWindy
Mon Aug 28, 2023 9:42 pm
-
-
-
Steering shaft removal 185
by Bronccat » Tue Jun 01, 2021 6:01 pm » in Lo-Boy Series - 154, 184, 185 - 9
- 647
-
by Bronccat
Sat Jun 05, 2021 9:39 am
-
-
- 7
- 202
-
by SONNY
Tue Apr 23, 2024 10:05 am
-
-
LoBoy 154 - 3260 Deck Removal?
by Dougget » Mon Apr 01, 2024 9:33 am » in Lo-Boy Series - 154, 184, 185 - 3
- 112
-
by SONNY
Sun Apr 07, 2024 9:13 am
-
Return to “Lo-Boy Series - 154, 184, 185”
Who is online
Users browsing this forum: No registered users and 3 guests