This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link:
Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

Back to the Crank

The Cub Club -- Questions and answers to all of your Cub related issues.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
User avatar
pickerandsinger
10+ Years
10+ Years
Posts: 1501
Joined: Thu Oct 18, 2012 3:23 pm
Zip Code: 13143
Tractors Owned: 1957 Cub Low Boy w/ FH Mott Flail Mower
1953 Cub w/ sprayer and 54A blade (Chompers)
1954 Cub w/fast hitch (Ira)
1948 Cub ( Papa Paul)with Henderson loader..
1951 Mutt mix Cub (BattleAx
1950 Farmall Cub (basket case demo)
Cub parts tractor
2019 " KuB"ota 2601 loader and roto tiller
1951 Ferguson TEA 20 (parts)( Uncle Rusty)
F/H Disc Harrow for cub L-38
C-22 Sickle Bar Mower
IH C2 and C3 mower
Universal tool attachment with disc hillers..Rear cultivators (various tips
York Rake for Cub home made
Single bottom Plow for Cub F194
Gravely 5660 12 hp/ w snoblower.rototiller,bush hog
Circle of Safety: Y

Back to the Crank

Postby pickerandsinger » Sat Apr 27, 2013 5:56 am

Are they all the same size...I have one for my 57 Low Boy, but it only inserts about 6/7 inches and stops in my 53....The 53 shows no signs of damage the crank hole has been cleaned...Dave
In Memory of 58,286

SPONSOR AD

Sponsor



Sponsor
 

Eugene
Team Cub Mentor
Team Cub Mentor
Posts: 20344
Joined: Fri Jul 02, 2004 9:52 pm
Zip Code: 65051
Circle of Safety: Y
Location: Mo. Linn

Re: Back to the Crank

Postby Eugene » Sat Apr 27, 2013 7:39 am

Question. We are discussing the hand crank used to start the engine and the inability of the hand crank to pass completely through the 1953's bolster? Correct.

Flashlight and attempt to insert the hand crank, looking for the obstruction or the cause of the problem.

Check to see if the pin in the hand crank has been replaced, sometimes the replacement pin is a bit to long.
I have an excuse. CRS.

User avatar
pickerandsinger
10+ Years
10+ Years
Posts: 1501
Joined: Thu Oct 18, 2012 3:23 pm
Zip Code: 13143
Tractors Owned: 1957 Cub Low Boy w/ FH Mott Flail Mower
1953 Cub w/ sprayer and 54A blade (Chompers)
1954 Cub w/fast hitch (Ira)
1948 Cub ( Papa Paul)with Henderson loader..
1951 Mutt mix Cub (BattleAx
1950 Farmall Cub (basket case demo)
Cub parts tractor
2019 " KuB"ota 2601 loader and roto tiller
1951 Ferguson TEA 20 (parts)( Uncle Rusty)
F/H Disc Harrow for cub L-38
C-22 Sickle Bar Mower
IH C2 and C3 mower
Universal tool attachment with disc hillers..Rear cultivators (various tips
York Rake for Cub home made
Single bottom Plow for Cub F194
Gravely 5660 12 hp/ w snoblower.rototiller,bush hog
Circle of Safety: Y

Re: Back to the Crank

Postby pickerandsinger » Sat Apr 27, 2013 4:33 pm

Sorry Eugene...Wasn't thinking...Yes its the hand crank...It fits great in the 57 low boy, but starts in the bolster in the 53 but doesn't go thru....I'll check it again and check the pin....Sorry about the post, I forgot about "Crankshaft"....Jeeeeeez.....Thanks for the reply, sorry you had to decipher it, but great job....Dave
In Memory of 58,286


Return to “Farmall Cub”

Who is online

Users browsing this forum: No registered users and 42 guests