While working on my cub, I took the steering gear housing and bolster apart. I took the gear out and cleaned everything up and installed new gaskets. After getting it all back together and back on the tractor the steering is really tight. My question is, could I have tightened the castle nut too much? Or will it free up after use? Thanks for advice.
Paul
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Question about steering tightness
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- Cub Star!!
- Posts: 270
- Joined: Sat Oct 02, 2021 12:04 pm
- Zip Code: 28635
-
- Cub Pro
- Posts: 852
- Joined: Fri May 09, 2008 2:47 pm
- Zip Code: 74022
- Tractors Owned: 8 F Cubs, 7 Lo-Boys, 2 # LoBoys, 1 CC, 1 H, 1 other
- Circle of Safety: Y
- Location: OK, Copan
-
- Cub Pro
- Posts: 4435
- Joined: Wed Dec 26, 2007 7:45 pm
- Zip Code: 32536
- Circle of Safety: Y
- Location: FL, Crestview
Re: Question about steering tightness
Did you reinstall the original gasket on the steering rod bearing retainer or make a new one?
Screwstick #3934
FCub - LoBoy - Numbered Series - Power Unit Databases
FCub - LoBoy - Numbered Series - Power Unit Databases
-
- Cub Star!!
- Posts: 270
- Joined: Sat Oct 02, 2021 12:04 pm
- Zip Code: 28635
Re: Question about steering tightness
Raymond,
I made a new gasket and the material may have been a little thicker.
I made a new gasket and the material may have been a little thicker.
-
- Cub Pro
- Posts: 4435
- Joined: Wed Dec 26, 2007 7:45 pm
- Zip Code: 32536
- Circle of Safety: Y
- Location: FL, Crestview
Re: Question about steering tightness
That is one of two gaskets that are thickness critical. Too thin and it will put the gears in a bind, too thick and it will add to slop.
I'd try to loosen the castle nut up a bit and see what happens, but not to the point of it allowing the pitman arm to move up and down.
I'd try to loosen the castle nut up a bit and see what happens, but not to the point of it allowing the pitman arm to move up and down.
Screwstick #3934
FCub - LoBoy - Numbered Series - Power Unit Databases
FCub - LoBoy - Numbered Series - Power Unit Databases
-
- Cub Star!!
- Posts: 270
- Joined: Sat Oct 02, 2021 12:04 pm
- Zip Code: 28635
Re: Question about steering tightness
It very well could be the thicker gasket. I will back the castle nut off and maybe that will free it up a little.
Thanks Raymond,and Arthur.
Thanks Raymond,and Arthur.
-
- Cub Pro
- Posts: 852
- Joined: Fri May 09, 2008 2:47 pm
- Zip Code: 74022
- Tractors Owned: 8 F Cubs, 7 Lo-Boys, 2 # LoBoys, 1 CC, 1 H, 1 other
- Circle of Safety: Y
- Location: OK, Copan
Re: Question about steering tightness
Paul, I would try loosening the steering rod bearing retainer bolts (easier to get to) and see if that helps and sometimes one notch on the castle nut is a bunch.
Have a good day, Art
-
- Cub Star!!
- Posts: 270
- Joined: Sat Oct 02, 2021 12:04 pm
- Zip Code: 28635
Re: Question about steering tightness
Art,
Will do. Thanks
Will do. Thanks
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Rear main seal plate bolts tightness. Direction rod cap bolts
by pett3227b » Thu Jun 02, 2022 12:31 pm » in Farmall Cub - 8
- 310
-
by Mht
Mon Jun 06, 2022 6:48 pm
-
-
- 11
- 281
-
by Greenthumbfarms
Sun Feb 13, 2022 6:32 pm
-
-
Question about ‘49 Farmall Cub Steering Attachment(s)
by AndiMac » Mon Sep 06, 2021 10:38 pm » in Farmall Cub - 18
- 629
-
by Eugene
Sun Sep 19, 2021 9:53 pm
-
-
-
47 Cub steering leak and hard steering Attachment(s)
by AHS » Sun Jun 05, 2022 6:27 am » in Farmall Cub - 10
- 511
-
by Glen
Tue Jun 14, 2022 7:14 pm
-
-
- 3
- 200
-
by Tractor Rod
Wed Jan 12, 2022 2:54 pm
Who is online
Users browsing this forum: MrBee and 5 guests