This T/C unit is serial number 351981R1, which is different from the one shown in the "How To" section.
Removed the Pressure Regulator Valve assembly and removed the o-ring on both the piston (#22) and regulator (#26). Here's a pic of where I'm referring:
Here's the inner portion I'm talking about (it has female threads to receive the regulator):
This is what I've removed:
My question: Is the inner portion supposed to come out or not (what I'm pointing to in the second picture)?
IMO, it does not. It's not shown in the exploded view in the Serviceman's Handbook, nor would it be able to receive and hold the threaded regulator if it was not permanently connected to the T/C unit or machined into it.
Your opinion?
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Touch Control Rebuild
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- Cub Pro
- Posts: 7760
- Joined: Mon Jun 22, 2009 6:56 am
- Zip Code: 64070
- Tractors Owned: 1942 Farmall AV, serial #87025
1947 Farmall Circle Cub, serial #2116
1948 Farmall Cub, serial #46066 - Circle of Safety: Y
- Location: Lone Jack, MO
-
- 10+ Years
Re: Touch Control Rebuild
Stanton wrote:My question: Is the inner portion supposed to come out or not (what I'm pointing to in the second picture)?
Stanton, no and in regards to ref #22, what version of the parts manuals are you referencing, I checked and mine does not match up.
Are you replacing the oil strainer in the block?
-
- Cub Pro
- Posts: 7760
- Joined: Mon Jun 22, 2009 6:56 am
- Zip Code: 64070
- Tractors Owned: 1942 Farmall AV, serial #87025
1947 Farmall Circle Cub, serial #2116
1948 Farmall Cub, serial #46066 - Circle of Safety: Y
- Location: Lone Jack, MO
Re: Touch Control Rebuild
cubguy47 wrote:Stanton, no and in regards to ref #22, what version of the parts manuals are you referencing, I checked and mine does not match up.
Are you replacing the oil strainer in the block?
I'm replacing all the o-rings in the T/C unit and want to make sure I get them all.
T/C Manual referenced: Rudi's manuals--Blue Ribbon Service Manuals--GSS-1024T/C Manual , pages 30-31 (exploded view of T/C unit [p.30] w/ corresponding index [p.31]).
I believe you've answered my question. Thanks.
-
- 10+ Years
Re: Touch Control Rebuild
Ok, that is why I was reading a different part reference number 22 than what you had, I was reading my parts manual rev F. Sorry.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 5
- 258
-
by Dale Finch
Tue Jul 18, 2023 9:32 pm
-
-
Should this be used with touch control Attachment(s)
by cowridermi » Sun May 14, 2023 2:41 pm » in Farmall Cub - 2
- 236
-
by radioguy41
Sun May 14, 2023 5:07 pm
-
-
- 4
- 273
-
by Bill V in Md
Thu Feb 10, 2022 9:55 pm
-
- 5
- 1115
-
by Glen
Thu Dec 28, 2023 6:35 pm
-
- 5
- 359
-
by Don McCombs
Wed Jan 19, 2022 7:58 am
Who is online
Users browsing this forum: No registered users and 1 guest