I was at a friends house today and he said he had a CC w/ M & W 9 speed? I never herd of it till today, is it out there? Just throwing out there.
Enjoy
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Cub Cadet with M & W 9 Speed
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 916
- Joined: Sun Feb 02, 2003 10:44 pm
- Zip Code: 60936
- Tractors Owned: 47 Cub SN 8664
48 Cub
50 Demo
54 Cub
3-55 Cub
2-56 Cub
55 LOBOY SN 876
57 LOBOY
58 French Cub
2- 60 LOBOY
69 Cub
54 Super M
42 H
48 H
57 300LP
57 450
Cub Cadet 123
Cub Cadet 149 - Circle of Safety: Y
- Location: Gibson City, IL
-
- 10+ Years
- Posts: 2680
- Joined: Mon Oct 24, 2005 11:35 am
- Zip Code: 14072
- eBay ID: toysforjake
- Tractors Owned: Lots of Cub Cadets!
1951 Farmall Cub
1977 IH Cub
1966 IH Cub
1965 IH Lo Boy
1964 IH Lo Boy
1949 Farmall Cub
Several IH 154 Lo Boys
1979 IH 184 Lo Boy
Simplicity 4416 Sovereign
Simplicity Conquest
Simplicity Legacy 4x4 Diesel
Mitsubishi MT180D 4x4 Diesel - Circle of Safety: Y
- Location: Grand Island, NY
Re: Cub Cadet with M & W 9 Speed
Yes, There were apparently only about 100 ever built, and only a handful known to exist. Geezer (Bill DeTurck) on the IH Cub Cadet forum has one and I've seen it in action. If I remember correctly, it gives you all lower gears, so you have the 3 original speeds, then 6 speeds lower than standard 1st gear. I would imagine they were originally designed and installed with the Ground Saw attachment, a trencher that was built for the Cub Cadets. That's the only thing I can think of where that slow of a ground speed would be helpful.
Cub Cadets 682, 1811, 1864, Simplicity Legacy XL 4x4 Diesel with FEL, 60" mower, 50" Tiller
-
- 10+ Years
- Posts: 916
- Joined: Sun Feb 02, 2003 10:44 pm
- Zip Code: 60936
- Tractors Owned: 47 Cub SN 8664
48 Cub
50 Demo
54 Cub
3-55 Cub
2-56 Cub
55 LOBOY SN 876
57 LOBOY
58 French Cub
2- 60 LOBOY
69 Cub
54 Super M
42 H
48 H
57 300LP
57 450
Cub Cadet 123
Cub Cadet 149 - Circle of Safety: Y
- Location: Gibson City, IL
Re: Cub Cadet with M & W 9 Speed
Courious question, If I was to be able to buy it off the guy? Could it be outfitted to a cub? Not saying he would sell it, but if I could find another one like it?
Thanks
Thanks
-
- 10+ Years
- Posts: 2680
- Joined: Mon Oct 24, 2005 11:35 am
- Zip Code: 14072
- eBay ID: toysforjake
- Tractors Owned: Lots of Cub Cadets!
1951 Farmall Cub
1977 IH Cub
1966 IH Cub
1965 IH Lo Boy
1964 IH Lo Boy
1949 Farmall Cub
Several IH 154 Lo Boys
1979 IH 184 Lo Boy
Simplicity 4416 Sovereign
Simplicity Conquest
Simplicity Legacy 4x4 Diesel
Mitsubishi MT180D 4x4 Diesel - Circle of Safety: Y
- Location: Grand Island, NY
Re: Cub Cadet with M & W 9 Speed
No, the drive on a cadet is different than a Cub, although the transmission appears the same. The Cub Cadet transmission has an input gear, which reverses the drive direction, and changes the input speed to the transmission, to accomodate for not having the final drives like on a Cub. So, the creeper drive on a Cadet bolts to the input gear housing, not directly to the transmission like the torque tube does on a Cub. Also, you would have to modify the torque tube, drive shaft, floor pan, brake linkages, lift rod to the rear lift, and a whole slew of other things on a Cub to accomodate for the creeper drive being inserted into the drive line. You either have to shorten the torque tube (not sure how you would do that since it's cast) or you have to lengthen out a bunch of other things if you don't shorten the torque tube. Regardless, I think it's a whole lot more work than you could imagine.
If you can buy it from the guy, the better application would be to install it into a Cadet!
If you can buy it from the guy, the better application would be to install it into a Cadet!
Cub Cadets 682, 1811, 1864, Simplicity Legacy XL 4x4 Diesel with FEL, 60" mower, 50" Tiller
-
- 10+ Years
- Posts: 34
- Joined: Sat Mar 16, 2013 9:53 pm
- Zip Code: 44062
- Tractors Owned: IH Cub Cadet 1450
IH Cub Cadet 1450 parts
IH Cub Cadet 1250 parts
IH Cub Cadet Original
IH Cub Cadet 100
IH Cub Cadet 71
IH Cub Cadet 123
IH Cub Cadet 102
IH Cub Cadet 72
IH Cub Cadet 86
CCC 1211 - Location: Middlefield, Ohio
Re: Cub Cadet with M & W 9 Speed
The Cub Cadet with a M&W was a Original. I don't believe the M&W was made for any other model but for the Original Cub Cadet. Sorry to say, I doubt your friend would come off that extremely rare piece of history. But I wish you the very best of luck!
The M&W Gear Company of Gibson City, IL, made the gear reduction unit only for the Original as I already said. The speed ranges were: direct drive, under drive, and over drive. The tractor has 9 speeds forward at this point, and 3 speeds at reverse.
The Original was now up to a wopping 10.8 miles pre hour top speed! Your steering box and tir rod ends, and drag link were to be in top-notch mechanical condition. Also the tractor was now 4 inches longer. After the Original was no longer made, M&W did not make any other gear reductions for IHCC .
The M&W Gear Company of Gibson City, IL, made the gear reduction unit only for the Original as I already said. The speed ranges were: direct drive, under drive, and over drive. The tractor has 9 speeds forward at this point, and 3 speeds at reverse.
The Original was now up to a wopping 10.8 miles pre hour top speed! Your steering box and tir rod ends, and drag link were to be in top-notch mechanical condition. Also the tractor was now 4 inches longer. After the Original was no longer made, M&W did not make any other gear reductions for IHCC .
-
- 10+ Years
- Posts: 2338
- Joined: Sat Apr 10, 2004 6:12 pm
- Zip Code: 40218
- Circle of Safety: Y
- Location: KY, Louisville
Re: Cub Cadet with M & W 9 Speed
The M&W 9 Speed gear box was installed between the front frame and the gear reduction housing, only on the Original Cub Cadet as stated above. It added 2 inches to the length of the tractor. It is different, and could not be used with, the Danco UD6 creeper (direct drive and under drive) that was also available for the Original. If you can find one for sale, it is going to be rather pricey and require deep, deep, pockets, unless the seller does not know what he/she has, and parts are not available so make sure it is complete and in working order..
- Attachments
-
- MVC-029S (Small).JPG (37.09 KiB) Viewed 2403 times
-
- Similar Topics
- Replies
- Views
- Last post
-
- 1
- 557
-
by BigBill
Sat May 22, 2021 11:03 pm
-
-
My First Cub Cadet. 1982 Cub Cadet 1282 Attachment(s)
by AntiqueTractorFan » Thu Jan 26, 2023 10:25 pm » in Cub Cadet - 0
- 1286
-
by AntiqueTractorFan
Thu Jan 26, 2023 10:25 pm
-
-
- 16
- 2610
-
by BigBill
Sun Jul 18, 2021 11:47 pm
-
- 3
- 1441
-
by 790rivers
Tue Jun 22, 2021 1:50 pm
-
- 19
- 2686
-
by BullDAWG
Fri Jul 08, 2022 6:19 pm
Who is online
Users browsing this forum: No registered users and 1 guest