This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
My Restoration of Rex '48 - #21005
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- PVF1799
- 10+ Years
- Posts: 1475
- Joined: Fri Mar 15, 2013 9:46 pm
- Zip Code: 12009
- eBay ID: kepara
- Tractors Owned: 1929 Farmall Regular #T111250 (Original Owner)
1942 Farmall M #55654
1948 Farmall Cub #21005
1955 Farmall Cub #190769
1961 Cub Cadet #16509
1975 Cub Cadet 1250H
197x IH 990 Haybine
1994 JD 5320 Diesel
Attachments: Woods 42F Fast Hitch, L38 Disc Fast Hitch, F11 Plow Fast Hitch, Land Plow, Snow Plow, Grader Blade, Planter w/Fertilizer, Cultivators, Hilling Disks, Sickle Bar Mower(2), IH 7' Sickle Bar Mower, Flail Mower and 5' International Belly Mower. - Circle of Safety: Y
- Location: Altamont, NY
- Contact:
My Restoration of Rex '48 - #21005
New Brake Bands and Brake Drums are in. When complete this will be the first time since about 1970 - the brakes will work as designed. You've all been a big help so far I'm sure I'll need lots more. One of our biggest challenges was that someone before we got her - welded the seat bolts into the toolbox bracket.....That was fixed with some careful cutting torch work.
Last edited by Rudi on Mon Aug 12, 2013 12:05 pm, edited 1 time in total.
Reason: Author's Request
Reason: Author's Request
Ken
Pleasant View Farm - Est. 1799
1930 Farmall Restoration Project
My Restoration Project - FCUB '48 - Rex
Pleasant View Farm - Est. 1799
1930 Farmall Restoration Project
My Restoration Project - FCUB '48 - Rex
- Brendan In NC
- 10+ Years
- Posts: 440
- Joined: Fri Jul 29, 2011 6:54 pm
- Zip Code: 27858
- Tractors Owned: 1964 Farmall Cub Red Square Nose # 223883 one of 2300 built before they switch to Yellow and White.
1964 Farmall 140 #27512
Just a Clean Strong run of the mill Farmall 140 with very little Wear.
Also have a bit of equipment
Woods C-42 Belly mower, 1963 IH McCormick #215 Plow, IH #144 Cultivators, IH Side Dresser (in need of some work non working at the moment) - Location: Greenville N.C
- Contact:
Re: Our Project Cub Serial # 21005
Hey There Ken! Glad to see ya on the Cub forum!
Tractors are like watermelons..Eat the red and throw away the green!!
Brendan Dixon Greenville NC
1964 Farmall Cub #223883
1964 Farmall 140 #27512
Tractorguy140, YouTube
Brendan Dixon Greenville NC
1964 Farmall Cub #223883
1964 Farmall 140 #27512
Tractorguy140, YouTube
- dgrapes59
- 10+ Years
- Posts: 3732
- Joined: Sun Jul 13, 2008 10:05 pm
- Zip Code: 45067
- Tractors Owned: 1951 Cub, 2-1955 Loboy w FH, a few plows, discs, mowers, blades, carrier & such
Several '61 CC Originals, Cub Cadet 100, several 102's & 122's, 124, various CC options & implements, #1Trailer, 1963 Springfield, JD 770, Ford 8N - Circle of Safety: Y
- Location: OH, Trenton
Re: Our Project Cub Serial # 21005
Well, it looks like you don't mess around!
I see you are taking the "while I have the hood off" approach!
It looks like you are well on your way to have a nice Cub for many more years!
Thanks for sharing,
I see you are taking the "while I have the hood off" approach!
It looks like you are well on your way to have a nice Cub for many more years!
Thanks for sharing,
David
- PVF1799
- 10+ Years
- Posts: 1475
- Joined: Fri Mar 15, 2013 9:46 pm
- Zip Code: 12009
- eBay ID: kepara
- Tractors Owned: 1929 Farmall Regular #T111250 (Original Owner)
1942 Farmall M #55654
1948 Farmall Cub #21005
1955 Farmall Cub #190769
1961 Cub Cadet #16509
1975 Cub Cadet 1250H
197x IH 990 Haybine
1994 JD 5320 Diesel
Attachments: Woods 42F Fast Hitch, L38 Disc Fast Hitch, F11 Plow Fast Hitch, Land Plow, Snow Plow, Grader Blade, Planter w/Fertilizer, Cultivators, Hilling Disks, Sickle Bar Mower(2), IH 7' Sickle Bar Mower, Flail Mower and 5' International Belly Mower. - Circle of Safety: Y
- Location: Altamont, NY
- Contact:
Re: Our Project Cub Serial # 21005
Brendan In NC wrote:Hey There Ken! Glad to see ya on the Cub forum!
Brendan, thanks for commenting on my pix. Glad to be here on the forum and ffeell so wwelccome by ya'll. Be glad when I can give advice, as easily as request it.
Ken
Pleasant View Farm - Est. 1799
1930 Farmall Restoration Project
My Restoration Project - FCUB '48 - Rex
Pleasant View Farm - Est. 1799
1930 Farmall Restoration Project
My Restoration Project - FCUB '48 - Rex
- PVF1799
- 10+ Years
- Posts: 1475
- Joined: Fri Mar 15, 2013 9:46 pm
- Zip Code: 12009
- eBay ID: kepara
- Tractors Owned: 1929 Farmall Regular #T111250 (Original Owner)
1942 Farmall M #55654
1948 Farmall Cub #21005
1955 Farmall Cub #190769
1961 Cub Cadet #16509
1975 Cub Cadet 1250H
197x IH 990 Haybine
1994 JD 5320 Diesel
Attachments: Woods 42F Fast Hitch, L38 Disc Fast Hitch, F11 Plow Fast Hitch, Land Plow, Snow Plow, Grader Blade, Planter w/Fertilizer, Cultivators, Hilling Disks, Sickle Bar Mower(2), IH 7' Sickle Bar Mower, Flail Mower and 5' International Belly Mower. - Circle of Safety: Y
- Location: Altamont, NY
- Contact:
Re: Our Project Cub Serial # 21005
dgrapes59 wrote:Well, it looks like you don't mess around!
I see you are taking the "while I have the hood off" approach!
It looks like you are well on your way to have a nice Cub for many more years!
Thanks for sharing,
David, yup, we're taking the hood off approach. We figured we've had this tractor since the mid 1960's, it deserves some real TLC. Last evening we decided to pull the right axle housing to find it full of corn and seeds soaked in oil. The transmission o-ring and axle seal are well shot. Glad we pulled that also.
Thanks for commenting on our pix. We 're gonna shoot a time lapse of it going back together.
Regards,
Ken
Pleasant View Farm - Est. 1799
1930 Farmall Restoration Project
My Restoration Project - FCUB '48 - Rex
Pleasant View Farm - Est. 1799
1930 Farmall Restoration Project
My Restoration Project - FCUB '48 - Rex
-
- 10+ Years
- Posts: 1654
- Joined: Thu Dec 24, 2009 9:19 am
- Zip Code: 00000
- Tractors Owned: '48 trimmed dash high crop cub , '78 3/4 cub , lo-boy/59 mower , '64 "galvanized" cub , cub-6 toolbar , sicklebar mowers , 54 blade , plow , mott mower , early belly mower . . international 1010 pickup with 345ci v-8 .
- Circle of Safety: Y
- Location: louisiana
Re: Our Project Cub Serial # 21005
that cub looks like shes in good hands . the time lapse idea is a great one . i hope you have time , im sure a bunch of these guys would love it , as would i . coppersmythe...........................................................
- PVF1799
- 10+ Years
- Posts: 1475
- Joined: Fri Mar 15, 2013 9:46 pm
- Zip Code: 12009
- eBay ID: kepara
- Tractors Owned: 1929 Farmall Regular #T111250 (Original Owner)
1942 Farmall M #55654
1948 Farmall Cub #21005
1955 Farmall Cub #190769
1961 Cub Cadet #16509
1975 Cub Cadet 1250H
197x IH 990 Haybine
1994 JD 5320 Diesel
Attachments: Woods 42F Fast Hitch, L38 Disc Fast Hitch, F11 Plow Fast Hitch, Land Plow, Snow Plow, Grader Blade, Planter w/Fertilizer, Cultivators, Hilling Disks, Sickle Bar Mower(2), IH 7' Sickle Bar Mower, Flail Mower and 5' International Belly Mower. - Circle of Safety: Y
- Location: Altamont, NY
- Contact:
1948 Cub #21005 - Restoration Update
Hi all - thought I'd share what we got done this weekend.
1. Tie Rod bent for about 40 years was removed and straightened after about 30 trial and errors I got the inner one out, adjusted them both so they slide freely - well mostly free....A small tap and will work again.
2. The governor has been disassembled as many of you know. Will be reading the tolerance guides and service manuals -
3. Thanks for all your help, I've got fenders coming via eBay.
4. The right drive axle housing is off- the mice did a nice job of filling that.....
5. Differential is out so we could change the transmission seal O-Ring and drive-shaft seals.
6. Mostly importantly the slop sink is installed in the garage so I can wash up out there - My blushing bride of 36 years is joyful
More pix this week - if the work week is not too crazy.
1. Tie Rod bent for about 40 years was removed and straightened after about 30 trial and errors I got the inner one out, adjusted them both so they slide freely - well mostly free....A small tap and will work again.
2. The governor has been disassembled as many of you know. Will be reading the tolerance guides and service manuals -
3. Thanks for all your help, I've got fenders coming via eBay.
4. The right drive axle housing is off- the mice did a nice job of filling that.....
5. Differential is out so we could change the transmission seal O-Ring and drive-shaft seals.
6. Mostly importantly the slop sink is installed in the garage so I can wash up out there - My blushing bride of 36 years is joyful
More pix this week - if the work week is not too crazy.
Ken
Pleasant View Farm - Est. 1799
1930 Farmall Restoration Project
My Restoration Project - FCUB '48 - Rex
Pleasant View Farm - Est. 1799
1930 Farmall Restoration Project
My Restoration Project - FCUB '48 - Rex
- Wakulla Bill
- 10+ Years
- Posts: 358
- Joined: Thu Jun 30, 2011 9:19 pm
- Zip Code: 32327
- Tractors Owned: Now
73 MF 165
63 MF 203 Ind
44 BF Avery "A" Project
51 Farmall Cub
49 Farmall Cub
48 Farmall Super A - Circle of Safety: Y
- Location: Crawfordville, Fla
Re: 1948 Cub #21005 - Restoration Update
Looks like you have been a busy man! You should have a nice Cub when you're done. Look forward to some pics.
Bill
Bill
"Work smarter; Not harder"
-
- 10+ Years
- Posts: 2
- Joined: Tue Mar 26, 2013 11:25 am
- Zip Code: 14804
Re: 1948 Cub #21005 - Restoration Update
Hi there! Got a question regarding piston rings.
I am reviving my '47 farmall cub for the first time and need to purchase new piston rings. How do you determine what size is needed? Std, 0.020, 0.030, etc? What measurements are needed?
I took measurements of the piston and cylinder with my calipers.
Piston (above top ring): 2.612"
Piston (below bottom ring): 2.625"
Cylinder: 2.63"
Does any of these measurements indicate what ring size I need to purchase?
Thanks in advance!
I am reviving my '47 farmall cub for the first time and need to purchase new piston rings. How do you determine what size is needed? Std, 0.020, 0.030, etc? What measurements are needed?
I took measurements of the piston and cylinder with my calipers.
Piston (above top ring): 2.612"
Piston (below bottom ring): 2.625"
Cylinder: 2.63"
Does any of these measurements indicate what ring size I need to purchase?
Thanks in advance!
-
- Team Cub Mentor
- Posts: 5634
- Joined: Thu Aug 03, 2006 6:20 am
- Zip Code: 43358
- Tractors Owned: 48 Cub Diesel (Cubota)
53 Cockshutt 20 restored (Shooter)
52 Cockshutt 20 unrestored
47 Leader "B" (Herckie)
49 Leader "D" (Princess)
49 Leader "D" very rough
48 Leader "D" unrestored
Kubota B6200E
Kubota B6200HST
Kubota B8200HST-D - Circle of Safety: Y
- Location: OH West Mansfield
Re: 1948 Cub #21005 - Restoration Update
Your basic measurements indicate that your engine is still std. bore size. While calipers will get you close, you really need to do some more precise cylinder wall measurements. The cylinder, as measured with calipers, will only show the size at the very top of the bore, where there is no wear. It needs to be measured at several locations along the bore, in both fore/aft and left/right directions to determine wear & taper before you can determine whether or not it can simply be re-rung or if it will have to be bored oversize. If you haven't done so, check out the links at the top of the page for the Blue Ribbon service manual and do some studying on rebuild procedures. And welcome to the forum!
-
- 10+ Years
- Posts: 2
- Joined: Tue Mar 26, 2013 11:25 am
- Zip Code: 14804
Re: 1948 Cub #21005 - Restoration Update
Thank you Gary. I just deglazed the cylinders over the weekend and they turned out great. Is it safe to assume with 4" long stones that I honed a uniform/consistent cylinder diameter along the length of the cylinder? If not, can you get a loaner measurement device from your local parts store to properly measure the cylinders?
Once I determine the bore diameter of my cylinders, typically what gap between the ring and cylinder wall is required? I assume you do not want to size the rings to the exact size of the cylinder because you will have too much friction, correct? I have the "shop manual" (Manual # IH-50) and it provides gap/clearance tolerances, piston-to-bore clearance of 0.0016-0.0024", Compression Ring End Gap 0.007-0.017", Oil Ring End Gap 0.007-0.020", Compression Ring Side Clearance 0.0020-0.0035", Oil Ring Side Clearance 0.0015-0.0030". The side clearance is what my question is referring to, correct? I may have answered my own question, but I wanted to make sure this is what I need to consider.
I really appreciate the help and I am so glad there are forums like this out there with knowledgeable people in them.
Thanks
Once I determine the bore diameter of my cylinders, typically what gap between the ring and cylinder wall is required? I assume you do not want to size the rings to the exact size of the cylinder because you will have too much friction, correct? I have the "shop manual" (Manual # IH-50) and it provides gap/clearance tolerances, piston-to-bore clearance of 0.0016-0.0024", Compression Ring End Gap 0.007-0.017", Oil Ring End Gap 0.007-0.020", Compression Ring Side Clearance 0.0020-0.0035", Oil Ring Side Clearance 0.0015-0.0030". The side clearance is what my question is referring to, correct? I may have answered my own question, but I wanted to make sure this is what I need to consider.
I really appreciate the help and I am so glad there are forums like this out there with knowledgeable people in them.
Thanks
- PVF1799
- 10+ Years
- Posts: 1475
- Joined: Fri Mar 15, 2013 9:46 pm
- Zip Code: 12009
- eBay ID: kepara
- Tractors Owned: 1929 Farmall Regular #T111250 (Original Owner)
1942 Farmall M #55654
1948 Farmall Cub #21005
1955 Farmall Cub #190769
1961 Cub Cadet #16509
1975 Cub Cadet 1250H
197x IH 990 Haybine
1994 JD 5320 Diesel
Attachments: Woods 42F Fast Hitch, L38 Disc Fast Hitch, F11 Plow Fast Hitch, Land Plow, Snow Plow, Grader Blade, Planter w/Fertilizer, Cultivators, Hilling Disks, Sickle Bar Mower(2), IH 7' Sickle Bar Mower, Flail Mower and 5' International Belly Mower. - Circle of Safety: Y
- Location: Altamont, NY
- Contact:
Restoration Update Serial #21005
Hi All - Weekend Update on RauCub-1 1948
Got my 40 gallon parts washer moved to the shop from the farm.
Finally could degrease the governor that was caked inside and out with gooey oil and dirt.
Then the fun started. I've got the front axle and gear-box up on it's own jack stands. I decided that the lower steering oil seal and gearbox gasket had to be changed. Gosh those 5 bolts are not easy to get at. Got the gear housing off
Then the fun began - the crown nut on the steering gear shaft had to be driven off ever so slowly with a punch - resultant in a very sore thumb . Got that off - steering gear, shaft and all the other parts in the parts washer.... Yippee.
Now see my next post as it will need your help. Thanks for listening - KEN
Got my 40 gallon parts washer moved to the shop from the farm.
Finally could degrease the governor that was caked inside and out with gooey oil and dirt.
Then the fun started. I've got the front axle and gear-box up on it's own jack stands. I decided that the lower steering oil seal and gearbox gasket had to be changed. Gosh those 5 bolts are not easy to get at. Got the gear housing off
Then the fun began - the crown nut on the steering gear shaft had to be driven off ever so slowly with a punch - resultant in a very sore thumb . Got that off - steering gear, shaft and all the other parts in the parts washer.... Yippee.
Now see my next post as it will need your help. Thanks for listening - KEN
Ken
Pleasant View Farm - Est. 1799
1930 Farmall Restoration Project
My Restoration Project - FCUB '48 - Rex
Pleasant View Farm - Est. 1799
1930 Farmall Restoration Project
My Restoration Project - FCUB '48 - Rex
-
- 10+ Years
- Posts: 489
- Joined: Thu May 19, 2005 2:04 pm
- Zip Code: 35216
- Tractors Owned: 1947 Cub
1949 Cub
2011 JD X320 - Circle of Safety: Y
- Location: Birmingham Al/Bay Springs Ms.
Re: Restoration Update Serial #21005
Ken, be sure and take lots of photos of your progress and keep us posted. Sounds like you are making progress with the break down.
Since retirement, the things I miss most are the holidays!
- PVF1799
- 10+ Years
- Posts: 1475
- Joined: Fri Mar 15, 2013 9:46 pm
- Zip Code: 12009
- eBay ID: kepara
- Tractors Owned: 1929 Farmall Regular #T111250 (Original Owner)
1942 Farmall M #55654
1948 Farmall Cub #21005
1955 Farmall Cub #190769
1961 Cub Cadet #16509
1975 Cub Cadet 1250H
197x IH 990 Haybine
1994 JD 5320 Diesel
Attachments: Woods 42F Fast Hitch, L38 Disc Fast Hitch, F11 Plow Fast Hitch, Land Plow, Snow Plow, Grader Blade, Planter w/Fertilizer, Cultivators, Hilling Disks, Sickle Bar Mower(2), IH 7' Sickle Bar Mower, Flail Mower and 5' International Belly Mower. - Circle of Safety: Y
- Location: Altamont, NY
- Contact:
Seat Question w/Pic!
Hi All - I don't see this part listed in the parts list and I'll be darned if I can remember what might have run through this. Any Ideas?
Ken
Pleasant View Farm - Est. 1799
1930 Farmall Restoration Project
My Restoration Project - FCUB '48 - Rex
Pleasant View Farm - Est. 1799
1930 Farmall Restoration Project
My Restoration Project - FCUB '48 - Rex
-
- Team Cub Mentor
- Posts: 20370
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: Seat Question w/Pic!
Place to attach your trip rope for a trailer type or the Little Genius plow?
I have an excuse. CRS.
Who is online
Users browsing this forum: Dave Downs, outdoors4evr and 41 guests