This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Hydraulics on 154
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 2796
- Joined: Tue Jul 22, 2008 12:44 pm
- Zip Code: 48370
- Tractors Owned: 184
- Location: Oxford, MI
Re: Hydraulics on 154
I have a lockout bar for the 3-point hitch if you are interested.
184 w/ Creeper & 3-Point
IH 3160a Mower
IH Model 15 Tiller
IH-54 Blade
IH 3160a Mower
IH Model 15 Tiller
IH-54 Blade
-
- 10+ Years
- Posts: 40
- Joined: Sat Apr 02, 2011 10:03 pm
- Zip Code: 67601
- Tractors Owned: Lo Boy 154 '69
IH 54 Snow Blade
3160? Belly Mower
2N Ford
3-pt sweeps
3-pt scoop
sickle mower - Location: Hays, Ks.
Re: Hydraulics on 154
I'm going to have to check this out. So it is possible to lock the 3 pt from operating when the hydraulics are used? Now, if I put the lever in 'lift' position, the 3 pt rises pretty fast, then the snow blade slowly comes up after a pause. I noticed when mowing last summer the deck was pretty slow acting but didn't know if this was normal for a LoBoy or not. Most of my tractor operating was done on much larger mid-late 1960's & 1970's Cas & Allis Chalmers tractors. Their hydraulics were fairly fast and sensitive as I recall. Thanks - Greg
-
- Team Cub Mentor
- Posts: 20401
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: Hydraulics on 154
Locking out the 3-point will speed up the deck movement by quite a bit.
The reason the 3-point moves faster or first is that it is the lightest load. Once the load evens out or the 3-point reaches it's top point, the stop, the hydraulics will move the next lightest load - the deck.
The reason the 3-point moves faster or first is that it is the lightest load. Once the load evens out or the 3-point reaches it's top point, the stop, the hydraulics will move the next lightest load - the deck.
I have an excuse. CRS.
Return to “Lo-Boy Series - 154, 184, 185”
Who is online
Users browsing this forum: No registered users and 2 guests