This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
history of the international C60 engine
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 37
- Joined: Tue Nov 29, 2011 2:40 pm
- Zip Code: 60518
Re: history of the international C60 engine
Would the 154 crank have a pilot bushing hole?
- Boss Hog
- Cub Pro
- Posts: 10290
- Joined: Mon Oct 24, 2005 8:35 pm
- Zip Code: 23962
- eBay ID: dmb2613
- Circle of Safety: Y
- Location: VA. Randolph
Re: history of the international C60 engine
some do early ones I am guessing
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
- Bus Driver
- 10+ Years
- Posts: 2917
- Joined: Sat Feb 11, 2006 5:26 pm
- Location: NC
Re: history of the international C60 engine
In 1953, the main bearing mounts in the block and the caps for the mains were changed. Very different configurations, with the change being-- in my opinion-- a big improvement. Nothing visible from the outside and not affecting the ability to install in one tractor or another. The change was a "running change" - during the model year and not at the beginning or end. First engine serial is in my files somewhere and probably in a prior post on this or another forum-- but the files are not easily accessible today.
Numerous changes in internal parts as the years went by-- but the main bearing is the major change to the engine block.
Numerous changes in internal parts as the years went by-- but the main bearing is the major change to the engine block.
Luck favors those who are prepared
Who is online
Users browsing this forum: No registered users and 39 guests