This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
clutch brake buttons.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
clutch brake buttons.
Ebay has clutch brake buttons for 48.99 isnt there something amiss here? I noticed mine were pretty well worn. But before I turn loose of 50 bucks I am going to do some thinking. There has to be some other material that can be used here. I know that wooden boxings work in combine straw walkers for years metal to wood. Now why couldnt a guy whittle out a couple wooden plugs and save 50? Or use a chunk of a disc brake pad. I just hate people that try to hold up other people. Anybody else found anything that works for clutch brake buttons? Harold
-
- Cub Pro
- Posts: 4436
- Joined: Wed Dec 26, 2007 7:45 pm
- Zip Code: 32536
- Circle of Safety: Y
- Location: FL, Crestview
Re: clutch brake buttons.
These will work for half the price: http://www.hamiltonbobs.com/Clutch-Brak ... 103305.htm
Screwstick #3934
FCub - LoBoy - Numbered Series - Power Unit Databases
FCub - LoBoy - Numbered Series - Power Unit Databases
-
- 10+ Years
Re: clutch brake buttons.
Thanks but there still needs to be something a lot cheaper. I will keep them in mind tho.
-
- Team Cub Mentor
- Posts: 20401
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: clutch brake buttons.
I purchased a new set when I ordered other parts. Kept the used pucks thinking there should be simple replacement or method of repairing them. Think the retail price for two pucks/brake buttons is way out of line for something that contains only a few cents worth of material.
The center is a 1/2" diameter oak dowel encased in some sort of slippery plastic coating. The oak dowel extends 1/4" beyond the plastic coating. Over all length was about 1 1/4".
Thought about using high strength epoxy to glue a piece of oak dowel to the existing/remaining dowel in the puck.
Measured, micrometer, the new pucks/brake buttons. The length of the two new pucks were close but not identical. Bit of use the installed new pucks will be the same length.
The center is a 1/2" diameter oak dowel encased in some sort of slippery plastic coating. The oak dowel extends 1/4" beyond the plastic coating. Over all length was about 1 1/4".
Thought about using high strength epoxy to glue a piece of oak dowel to the existing/remaining dowel in the puck.
Measured, micrometer, the new pucks/brake buttons. The length of the two new pucks were close but not identical. Bit of use the installed new pucks will be the same length.
I have an excuse. CRS.
-
- Team Cub Mentor
- Posts: 20401
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: clutch brake buttons.
Some measurement of clutch brake buttons. And a correction to measurement in previous post. Two worn buttons measured.
Center: .500" diameter of what appears to be oak dowel.
Outside diameter: .650" (-.001 to +.006)
Height of plastic on dowel: .775"
Over all length is approximately: 1.00" Perhaps a smidgen longer (1.025"). Lost or misplaced measurements on new buttons.
I don't see why something such as a piece of brake lining or another piece of dowel could not be cemented to the worn out button dowel.
Center: .500" diameter of what appears to be oak dowel.
Outside diameter: .650" (-.001 to +.006)
Height of plastic on dowel: .775"
Over all length is approximately: 1.00" Perhaps a smidgen longer (1.025"). Lost or misplaced measurements on new buttons.
I don't see why something such as a piece of brake lining or another piece of dowel could not be cemented to the worn out button dowel.
I have an excuse. CRS.
-
- 10+ Years
- Posts: 439
- Joined: Mon Jun 29, 2009 8:20 am
- Zip Code: 71836
- Tractors Owned: 49 cub buttercup
- Circle of Safety: Y
- Location: foreman ar.
Re: clutch brake buttons.
what are brake buttons
-
- Team Cub Mentor
- Posts: 20401
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: clutch brake buttons.
One of IH engineer's ingenious little devices installed in an apparatus to stop the flywheel (edit: pressure plate) from turning when you push in the clutch.tomcat wrote:what are brake buttons?
Cheapest I've seen a pair of the brake buttons is $22- for items that appear to me should be priced around $4- or $5- a pair.
The strength of the brake button is in the wooden dowel. Plastic coating is just to take up space between the dowel and the metal bracket. I'm going to attempt to put heat shrink, one layer at a time, on an oak dowel to see if I can get a diameter close to the original.
I have an excuse. CRS.
-
- Team Cub
- Posts: 17310
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: clutch brake buttons.
Is it possible to drill or otherwise remove the wood from the original plastic part and insert a new dowel?
My 154 came with a couple pieces of what appeared to be common brake lining material. They were sized for a perfect fit in place of the originals. I have no idea where they came from.
My 154 came with a couple pieces of what appeared to be common brake lining material. They were sized for a perfect fit in place of the originals. I have no idea where they came from.
-
- Team Cub Mentor
- Posts: 20401
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: clutch brake buttons.
That was one of my thoughts. Haven't tried it yet.Jim Becker wrote:Is it possible to drill or otherwise remove the wood from the original plastic part and insert a new dowel?
Currently looking for nylon or plastic sleeves in the correct OD, ID. Need to visit the local well stocked hardware store with micrometer and see what they have.
Another thought is to visit the industrial supply and pick up a short length, foot or so, of nylon or plastic rod. Turn on a wood or metal lathe to OD. and then drill to dowel size.
I have an excuse. CRS.
-
- 10+ Years
Re: clutch brake buttons.
I havent had mine out yet but it looks as if you could just make the oak bottons big enough so you wouldnt need the plastic part and when they are put in adjust them up enough that they couldnt fall out even if they got loose. Harold
-
- Team Cub Mentor
- Posts: 20401
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: clutch brake buttons.
I put a well used brake button in the vise with the intention of drilling it out. About 2 revolutions of the drill bit and the remainder of the oak dowel, about 1/16" thick, popped out. Dowel only had one small drop of adhesive on one edge holding it in place.Jim Becker wrote:Is it possible to drill or otherwise remove the wood from the original plastic part and insert a new dowel?
The oak dowel only extends about 3/16" into the plastic. Beneath the dowel is hollow with a centered round plastic piece extending from the bottom of the cavity to the level of the end of the dowel. Inside the plastic is a shoulder - along with the round plastic piece keeps the dowel from pushing back into the plastic.
Description may be unclear. Once the remainder of the dowel pops out, the repair will be obvious. Easy and inexpensive repair.
Eugene wrote:Some measurement of clutch brake buttons. And a correction to measurement in previous post. Two worn buttons measured.
Center: .500" diameter of what appears to be oak dowel.
Outside diameter: .650" (-.001 to +.006)
Height of plastic on dowel: .775"
Over all length is approximately: 1.00" Perhaps a smidgen longer (1.025"). Lost or misplaced measurements on new buttons.
I have an excuse. CRS.
-
- 10+ Years
- Posts: 4135
- Joined: Thu Nov 09, 2006 11:26 pm
- Zip Code: 61722
Re: clutch brake buttons.
Mine dont even hit on anything,--they may be gone altogether!---Never saw need for them anyway! LOL!!! thanks; sonny
-
- 10+ Years
- Posts: 99
- Joined: Tue May 01, 2012 10:22 pm
- Zip Code: 14830
- Tractors Owned: 108
147
1969 154
1971 154 - Location: Corning NY
Re: clutch brake buttons.
Seems like I remember reading in a previous post way back, somebody suggested using copper rod for clutch buttons.
-
- 10+ Years
- Posts: 1172
- Joined: Tue Oct 19, 2004 7:10 am
- Zip Code: 29130
- Tractors Owned: fcub(5)
tricycle cub
154 (4)
Earthmaster (2)
JD 40T, JD 420 crawler-loader, JD MT
JD Unstyled A, Styled A, Unstyled AR
JD H
Centaur Tractor
AC Model C, G
Cub Cadets (9)
Gibson D
Red-E - Circle of Safety: Y
- Location: SC, Ridgeway
Re: clutch brake buttons.
I never looked all that close at the clutch brake pads but do not remember them being made from a wood dowel, seems like they were plastic with a pad on the front.
Eitherway, I replaced two 154's pads with a copper rod turned to the correct diameter. Seems to work well.
Eitherway, I replaced two 154's pads with a copper rod turned to the correct diameter. Seems to work well.
-
- 10+ Years
Re: clutch brake buttons.
Thanks guys, Got some good ideas on here. Thats what I wanted. I am thinking the copper shaft will work well. Thanks Harold
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Stuck brake drum and spacer Attachment(s)
by rednax » Sun Feb 06, 2022 2:35 pm » in Lo-Boy Series - 154, 184, 185 - 6
- 547
-
by outdoors4evr
Mon Feb 28, 2022 7:30 am
-
-
-
Installing dual brake peddals on 1969 model 154 Attachment(s)
by Thisoldtruck » Sat Apr 02, 2022 6:28 pm » in Lo-Boy Series - 154, 184, 185 - 4
- 418
-
by willys55
Sun Apr 03, 2022 2:56 pm
-
-
- 5
- 417
-
by nat
Sat Mar 19, 2022 1:59 pm
-
- 3
- 215
-
by SONNY
Sun Apr 23, 2023 6:34 pm
-
- 1
- 812
-
by FSJNut
Sun Jul 02, 2023 8:55 pm
Return to “Lo-Boy Series - 154, 184, 185”
Who is online
Users browsing this forum: No registered users and 0 guests