This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
don't know about the 154
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 439
- Joined: Mon Jun 29, 2009 8:20 am
- Zip Code: 71836
- Tractors Owned: 49 cub buttercup
- Circle of Safety: Y
- Location: foreman ar.
don't know about the 154
i bought a 154 lowboy the other day, when i got it in the shop and pulled the sheet medal i nearly passed out. sure is different from my other cubs. but i have been reading and learning and don't think it will be to bad to work on. i hope. Tom
- Boss Hog
- Cub Pro
- Posts: 10290
- Joined: Mon Oct 24, 2005 8:35 pm
- Zip Code: 23962
- eBay ID: dmb2613
- Circle of Safety: Y
- Location: VA. Randolph
Re: don't know about the 154
Good luck with it I no like em
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
-
- Team Cub Mentor
- Posts: 20344
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: don't know about the 154
Purchased a 154 from a neighbor last spring thinking I would part it out. Turned out engine was in pretty decent condition and the remainder of the tractor only needed minor repairs. PIA to work on, much more difficult than a standard Cub. Parts are not that expensive. Labor is extensive.
I have an excuse. CRS.
- randallc
- Cub Pro
- Posts: 1906
- Joined: Tue Jan 18, 2011 9:16 am
- Zip Code: 72940
- Tractors Owned: 1951 Farmall Cub, 152 disk plow, 2 gang disk, belly mower, sickle mower
1949 Farmall Cub, cultivator, moldboard plow, disk,front blade. Cub Cadet, LTX1045 Mower. Cub Cadet's 109, 125, 1000, and 1250
1961 cub c2 belly mower and full blade. 48 cub manual lift with cultivators.
1947 Cub - Circle of Safety: Y
- Location: Huntington, AR
Re: don't know about the 154
tomcat,
Gary Charles bought one a couple of years ago basically just for mowing. His son mows the church yard with it. Works really good for that. He likes it, don't think he has had to do much to it. I never have driven it. I do my mowing with a LTX1045 Cub cadet which mows really good but they ain't the "cadet" that dad had. Not made to hold together.
Good luck with it. Were you pulling the sheet metal to pull the head, did you pull the head the first thing?
Gary Charles bought one a couple of years ago basically just for mowing. His son mows the church yard with it. Works really good for that. He likes it, don't think he has had to do much to it. I never have driven it. I do my mowing with a LTX1045 Cub cadet which mows really good but they ain't the "cadet" that dad had. Not made to hold together.
Good luck with it. Were you pulling the sheet metal to pull the head, did you pull the head the first thing?
- SONNY
- 10+ Years
- Posts: 4088
- Joined: Thu Nov 09, 2006 11:26 pm
- Zip Code: 61722
Re: don't know about the 154
Engine is a piece of cake to work on,---its the rest of the unit that sucks to work on!LOL!!thanks; sonny
-
- 10+ Years
- Posts: 439
- Joined: Mon Jun 29, 2009 8:20 am
- Zip Code: 71836
- Tractors Owned: 49 cub buttercup
- Circle of Safety: Y
- Location: foreman ar.
Re: don't know about the 154
hey randall, did not pull the head on this one. the gov.was all froze up , like to have never got that little arm off, but with some bp blaster some heat and a few bad words i finally got it off. gone to tune it up and check it out. Tom
- gitractorman
- 10+ Years
- Posts: 2678
- Joined: Mon Oct 24, 2005 11:35 am
- Zip Code: 14072
- eBay ID: toysforjake
- Tractors Owned: Lots of Cub Cadets!
1951 Farmall Cub
1977 IH Cub
1966 IH Cub
1965 IH Lo Boy
1964 IH Lo Boy
1949 Farmall Cub
Several IH 154 Lo Boys
1979 IH 184 Lo Boy
Simplicity 4416 Sovereign
Simplicity Conquest
Simplicity Legacy 4x4 Diesel
Mitsubishi MT180D 4x4 Diesel - Circle of Safety: Y
- Location: Grand Island, NY
Re: don't know about the 154
Yea, the engines are a piece of cake, like the Cubs. The rest can be a bear. It's more like working on a Cadet. Things are just crampt, run in between the frame, and the clutch is a total PITA. One thing to double check is the bolts from the frame into the final drives. Those are known to work loose and wear out the frame. I've seen several that we had to weld washers to the frame to strenghthen it back up because the holes were worn out so much. I make sure to let everyone know about that, especially if it's their first one.
Otherwise, I still love them. Great machines for mowing and pulling stuff around. VERY stable on hills, but the big turf tires are like slicks, even on wet grass. I grew up mowing my grandfather's place with one, and he had a 5-acre hill. One part was so steep that you had to go straight up/down to keep from rolling the tractor. Sometimes, coming back down, the tires would just start skidding on the wet grass. Made for a fun ride, but I was just 13 so everything was fun then...
Otherwise, I still love them. Great machines for mowing and pulling stuff around. VERY stable on hills, but the big turf tires are like slicks, even on wet grass. I grew up mowing my grandfather's place with one, and he had a 5-acre hill. One part was so steep that you had to go straight up/down to keep from rolling the tractor. Sometimes, coming back down, the tires would just start skidding on the wet grass. Made for a fun ride, but I was just 13 so everything was fun then...
Cub Cadets 682, 1811, 1864, Simplicity Legacy XL 4x4 Diesel with FEL, 60" mower, 50" Tiller
-
- 10+ Years
- Posts: 1172
- Joined: Tue Oct 19, 2004 7:10 am
- Zip Code: 29130
- Tractors Owned: fcub(5)
tricycle cub
154 (4)
Earthmaster (2)
JD 40T, JD 420 crawler-loader, JD MT
JD Unstyled A, Styled A, Unstyled AR
JD H
Centaur Tractor
AC Model C, G
Cub Cadets (9)
Gibson D
Red-E - Circle of Safety: Y
- Location: SC, Ridgeway
Re: don't know about the 154
I have 4 numbered series and none have been difficult to work on. There are differences from the offset cub. Some things are easier to work on on the offset cub, some things are easier on the numbered series. Still, overall, not very complicated machine.
-
- 10+ Years
- Posts: 439
- Joined: Mon Jun 29, 2009 8:20 am
- Zip Code: 71836
- Tractors Owned: 49 cub buttercup
- Circle of Safety: Y
- Location: foreman ar.
Re: don't know about the 154
thanks gitractorman, i'll be sure and check those bolts. tomcat
-
- 10+ Years
- Posts: 7388
- Joined: Sat Jul 22, 2006 5:02 pm
- Zip Code: 00000
- Location: in northern usa
Re: don't know about the 154
I love my three INT154's. There one of the best mowing machines as my local mower repair guy says IH wanted to hit the estate market and the int154/184/185 fit the nitch. I guess the eastate owners didn't like the farm tractor look of the fcub so they purchased the better looking int154/184/185 loboy's.
The cub cadets are the hardest to work on. The int154 is pretty much easier once the sheetmetal is off. I like my fucb too when its running.
Being an old car, truck & jeep mechanic can work on anything. I've worked on older jeeps that were underwater for many years they were that rusted. Trust me the 154's are easy. I love anything with ignition points. Give me the old stuff that runs forever.
The cub cadets are the hardest to work on. The int154 is pretty much easier once the sheetmetal is off. I like my fucb too when its running.
Being an old car, truck & jeep mechanic can work on anything. I've worked on older jeeps that were underwater for many years they were that rusted. Trust me the 154's are easy. I love anything with ignition points. Give me the old stuff that runs forever.
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.
Return to “Lo-Boy Series - 154, 184, 185”
Who is online
Users browsing this forum: No registered users and 0 guests