This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Question for an H mechanic <answered>
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- Cub Pro
- Posts: 1866
- Joined: Sun Feb 22, 2009 3:30 pm
- Zip Code: 02748
- Tractors Owned: :
1949 Farmall Cub / FH
1951 Farmall Cub / IH mower
1964 International Cub Lo-Boy / Woods 59 mower
1967 International Cub / FH
1946 Farmall H
1949 Farmall H
a doodle bug
More than a dozen Cub Cadets running plus a few in the bone-yard
. - Location: Dartmouth, Massachusetts
Question for an H mechanic <answered>
Above is picture of front of transmission
That clutch shaft where it enters the transmission (upper part of picture) is leaking/loose. Can I change the bearing/seal from the outside, without opening up the transmission ???
Last edited by Bob Perry on Thu Jan 31, 2013 7:34 pm, edited 1 time in total.
REMEMBER: Keep it correct or you may face the
-
- Cub Pro
- Posts: 10290
- Joined: Mon Oct 24, 2005 8:35 pm
- Zip Code: 23962
- eBay ID: dmb2613
- Circle of Safety: Y
- Location: VA. Randolph
Re: Question for an H mechanic
you can change the seal, and I think the bearing, it has been many years since I worked on a H
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
-
- 10+ Years
- Posts: 249
- Joined: Wed Apr 20, 2011 10:34 am
- Zip Code: 28661
- Tractors Owned: IHCC Chapter 42
1985 Ford 1310
2007 MF 1533
1942 Farmall M
1970 Farmall Cub
1946 Farmall B
1200 Cub Cadet - Circle of Safety: Y
- Location: Patterson NC
Re: Question for an H mechanic
Hi Bob
I have an M with the same issue. Thought I would give it a try too. That kind of work makes me wish for smaller hands LOL Let me know if you have success. I will let you know if I get to it first.
I have an M with the same issue. Thought I would give it a try too. That kind of work makes me wish for smaller hands LOL Let me know if you have success. I will let you know if I get to it first.
BJ Moretz
Member Chapter 42 IHCC
1970 Farmall Cub
1533 MF
1310 Ford
1946 Farmall B
1942 Farmall M
1200 Cub Cadet
Member Chapter 42 IHCC
1970 Farmall Cub
1533 MF
1310 Ford
1946 Farmall B
1942 Farmall M
1200 Cub Cadet
-
- Cub Pro
- Posts: 1866
- Joined: Sun Feb 22, 2009 3:30 pm
- Zip Code: 02748
- Tractors Owned: :
1949 Farmall Cub / FH
1951 Farmall Cub / IH mower
1964 International Cub Lo-Boy / Woods 59 mower
1967 International Cub / FH
1946 Farmall H
1949 Farmall H
a doodle bug
More than a dozen Cub Cadets running plus a few in the bone-yard
. - Location: Dartmouth, Massachusetts
Re: Question for an H mechanic
BJ Moretz wrote:Hi Bob
I have an M with the same issue. Thought I would give it a try too. That kind of work makes me wish for smaller hands LOL Let me know if you have success. I will let you know if I get to it first.
Thanks. I called Columbia Tractor in NY and the parts guy was nice enough to take the phone out to the shop and speak to "one of the older guys" who said yes, you can replace "the smaller outer bearing" from the outside. I hope to get to it later today, to take it apart. And will post my results when I get them.
REMEMBER: Keep it correct or you may face the
-
- Cub Pro
- Posts: 1866
- Joined: Sun Feb 22, 2009 3:30 pm
- Zip Code: 02748
- Tractors Owned: :
1949 Farmall Cub / FH
1951 Farmall Cub / IH mower
1964 International Cub Lo-Boy / Woods 59 mower
1967 International Cub / FH
1946 Farmall H
1949 Farmall H
a doodle bug
More than a dozen Cub Cadets running plus a few in the bone-yard
. - Location: Dartmouth, Massachusetts
Re: Question for an H mechanic
Well I guess if ya can't find an H mechanic, ya gotta just be an H mechanic yourself.
Went pretty good. See the "yoke" in the top picture, I got it off with a gear-puller.
Then under that, the 3 cap screws take off the flange that holds the seal.
Then under that, you see another casting, with 6 bolts, when you take that off, you end up a short shaft and a couple gears in your hand. And now you have access to 2 bearings. The bigger, inside one is ST-206, the smaller outside one is ST-247. Both have "IHC" on them too. The seal is 19634-H C/R. Gonna get the parts on the way in the morning.
So the answer to the question asked in my original post is "Yes, it can be done from outside the transmission."
Many thanks to the helpful folks at Columbia tractor. I started thinking about shopping for the lowest prices, then I realized, what a valuable service it is to be able to talk to people who are dedicated to helping solve problems, even if it costs a few bucks more, I will get them right through the Case-IH dealership.
Went pretty good. See the "yoke" in the top picture, I got it off with a gear-puller.
Then under that, the 3 cap screws take off the flange that holds the seal.
Then under that, you see another casting, with 6 bolts, when you take that off, you end up a short shaft and a couple gears in your hand. And now you have access to 2 bearings. The bigger, inside one is ST-206, the smaller outside one is ST-247. Both have "IHC" on them too. The seal is 19634-H C/R. Gonna get the parts on the way in the morning.
So the answer to the question asked in my original post is "Yes, it can be done from outside the transmission."
Many thanks to the helpful folks at Columbia tractor. I started thinking about shopping for the lowest prices, then I realized, what a valuable service it is to be able to talk to people who are dedicated to helping solve problems, even if it costs a few bucks more, I will get them right through the Case-IH dealership.
REMEMBER: Keep it correct or you may face the
-
- Cub Pro
- Posts: 5762
- Joined: Mon Jul 30, 2007 11:48 am
- Zip Code: 32460
- eBay ID: noles1432460
- Circle of Safety: Y
- Location: FL, Sneads
Re: Question for an H mechanic <answered>
What Bob, no video. Not even pictures?
In the middle of every difficulty lies opportunity. - Albert Einstein
.
Roy Edenfield
Deep South CubFest #10
February 14 & 15, 2020
.
Roy Edenfield
Deep South CubFest #10
February 14 & 15, 2020
-
- Cub Pro
- Posts: 1866
- Joined: Sun Feb 22, 2009 3:30 pm
- Zip Code: 02748
- Tractors Owned: :
1949 Farmall Cub / FH
1951 Farmall Cub / IH mower
1964 International Cub Lo-Boy / Woods 59 mower
1967 International Cub / FH
1946 Farmall H
1949 Farmall H
a doodle bug
More than a dozen Cub Cadets running plus a few in the bone-yard
. - Location: Dartmouth, Massachusetts
Re: Question for an H mechanic <answered>
Mr E wrote:What Bob, no video. Not even pictures?
Haha you're a funny guy! Ever try using a camera with thick greasy hands?
Actually we have been taking some pictures of the clutch change-out, and intend to make a "how-to" video for YouTube, there's really nothing out there, and a lot of people think you need to split the tractor to do a clutch.
REMEMBER: Keep it correct or you may face the
-
- 10+ Years
- Posts: 249
- Joined: Wed Apr 20, 2011 10:34 am
- Zip Code: 28661
- Tractors Owned: IHCC Chapter 42
1985 Ford 1310
2007 MF 1533
1942 Farmall M
1970 Farmall Cub
1946 Farmall B
1200 Cub Cadet - Circle of Safety: Y
- Location: Patterson NC
Re: Question for an H mechanic <answered>
Thanks Bob
I ordered my seals this morning. Looking forward to the clutch video. That is on my to do list too. Please post the link to your video when it is uploaded.
Thanks again !
I ordered my seals this morning. Looking forward to the clutch video. That is on my to do list too. Please post the link to your video when it is uploaded.
Thanks again !
BJ Moretz
Member Chapter 42 IHCC
1970 Farmall Cub
1533 MF
1310 Ford
1946 Farmall B
1942 Farmall M
1200 Cub Cadet
Member Chapter 42 IHCC
1970 Farmall Cub
1533 MF
1310 Ford
1946 Farmall B
1942 Farmall M
1200 Cub Cadet
-
- Cub Pro
- Posts: 1866
- Joined: Sun Feb 22, 2009 3:30 pm
- Zip Code: 02748
- Tractors Owned: :
1949 Farmall Cub / FH
1951 Farmall Cub / IH mower
1964 International Cub Lo-Boy / Woods 59 mower
1967 International Cub / FH
1946 Farmall H
1949 Farmall H
a doodle bug
More than a dozen Cub Cadets running plus a few in the bone-yard
. - Location: Dartmouth, Massachusetts
Re: Question for an H mechanic <answered>
Yup no problem, as soon as my parts are in it will go together in a few days, then the video will be posted on this forum in the H section.
REMEMBER: Keep it correct or you may face the
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Question for the pro's
by BillBolt » Wed Jun 16, 2021 11:44 am » in Farmall H, HV, Super H, 300 & 350 - 2
- 1266
-
by Rodney51Cub
Wed Jun 16, 2021 9:45 pm
-
Return to “Farmall H, HV, Super H, 300 & 350”
Who is online
Users browsing this forum: No registered users and 2 guests