Shifter repair help

Farmall Cub Forum -- Questions and answers to all of your Cub related issues.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
5+ Years
5+ Years
Posts: 103
Joined: Mon Nov 12, 2012 9:52 pm
Zip Code: 76502

Shifter repair help

Postby Jdbfish » Sun Jan 27, 2013 4:38 am

Need to repair my shifter and found this link by searching the forum ... vement.htm
Anyone know where to get the offset washers used to do this repair? Any idea on specific sizes? Please help! Thanks....

Gary Dotson
Team Cub Mentor
Team Cub Mentor
Posts: 3122
Joined: Thu Aug 03, 2006 6:20 am
Zip Code: 43358
Tractors Owned: 48 Cub Diesel (Cubota)
53 Cockshutt 20 restored (Shooter)
52 Cockshutt 20 unrestored
47 Leader "B" (Herckie)
49 Leader "D" (Princess)
49 Leader "D" very rough
48 Leader "D" unrestored
Kubota B6200E
Kubota B6200HST
Kubota B8200HST-D
Circle of Safety: Y
Location: OH West Mansfield

Re: Shifter repair help

Postby Gary Dotson » Sun Jan 27, 2013 7:03 am

I don't know where George got those offset washers, you might check McMaster Carr and see if they have anything like them. George was quite the machinist so he may have made them.

Jack fowler
10+ Years
10+ Years
Posts: 905
Joined: Sat Feb 15, 2003 7:20 am
Zip Code: 00000

Re: Shifter repair help

Postby Jack fowler » Sun Jan 27, 2013 8:14 am

If I can remember George told me he went to a local auto parts store and bought Dorman - Mag Wheel Washers. The last one I did the only ones I could find is Offset - I.D. 0.70 Inch O.D. 1.25 Inch. Probably a good hardware store or McMaster-Carr if the auto parts store doesn’t have anything.
I’m really good at doing nothing…With that said…I’m really, really good at doing nothing

User avatar
bob in CT
Team Cub Mentor
Team Cub Mentor
Posts: 6000
Joined: Thu Jun 07, 2007 9:34 am
Zip Code: 06040
Tractors Owned: 77 Cub (red); 74 Cub; 52 Cub; 50 Cub ( post-demo)
Circle of Safety: Y
Location: CT, Manchester

Re: Shifter repair help

Postby bob in CT » Sun Jan 27, 2013 10:33 am

I had an interest in doing this but finding the washers and machining the parts put this way on the back burner. I see one offset washer from Dorman (for Cragars) but not two. Mcmaster has nothing of the sort. I always thought this would make a nice kit to package.

Jim Becker
Team Cub
Team Cub
Posts: 13764
Joined: Sun Feb 02, 2003 2:59 pm
Zip Code: 55319
Circle of Safety: Y
Location: MN

Re: Shifter repair help

Postby Jim Becker » Sun Jan 27, 2013 11:57 am

Below the second picture he said:
I decided to make new retainers and . . .

I don't think George ever hesitated to make a part if he thought he could make one that would work better than the original. I think you can do a pretty good job of keeping water out using the original parts and replacing/adding an o-ring.

User avatar
10+ Years
10+ Years
Posts: 7703
Joined: Thu Aug 19, 2004 2:31 pm
Zip Code: 10314
Location: NY Staten Island & Franklin

Re: Shifter repair help

Postby beaconlight » Sun Jan 27, 2013 2:19 pm

Fastenal has beveled and hillside washers.

Disclaimer I own stock in Fastenal

"Life's tough.It's even tougher if you're stupid."
- John Wayne

" We hang petty thieves and appoint the great ones to public office."
- Aesop

  • Similar Topics
    Last post

Return to “Farmall Cub”

Who is online

Users browsing this forum: No registered users and 2 guests