Dear Oliver: Here is a mill to consider: http://www.mightymitesawmills.com/
I have no personal experience with their mills, but they have been around for quite a while now.
I do have experience with the Woodmizer LT-10
http://www.woodmizer.com/us/PortableEqu ... wmill.aspx
A friend purchased it new in 2008, and I helped put it together and then cut enough lumber to make a shed/shop that was 12x16 using only my own lumber.
2x6" studs on 1 foot centers, with 6x10" post under each truss, and the trusses were 4x10". Way over built, but the idea was to show off the big lumber. We purchased logs from a nearby mill and had them delivered. With forks on the front on a mid size kabota, I was able to put 20 foot logs on the mill,up to about 20-22" in dia. He purchased a bed extension to get the length, as it only comes with enough to handle shorter logs. A 7hp gas engine came with it, but elec. was an option. The LT-10 is their only mill that can break down small enough to fit in an Alaska Bush Plane, so that is why he did not buy the LT-15. He wishes he had the LT-15 now. The newer LT-10's have an improved bed and log "clamps" ( I learned this from the web site). I managed to get 3 big logs cut in to 2x4's for every 1 blade I used. I liked thier resharpen service, and I feel the turn around time was quick. I don't feel that hyd. loaders or feed systems are worth the $$$$, unless, strength/health is an issue. Pushing the "sled" is like pushing a shopping cart in slow motion. Slow and steady pressure. Woodmizer has a company magizine that has some good info about other owners. See if you can get a copy.
Blade change is pretty easy, and I have never had a blade break or jump off the drive wheels. Make sure you have enough room for your log pile, mill, dry pile, scrap pile. All this takes up more room than you think. The good news is, you will have lots of wood to burn next winter, and sawdust for the wifes rose bed. I sure had a good time cutting my own lumber, but its not cheaper than the big box lumber places. I think he paid about $4500 for it. Consider the LT-15, its worth the extra $2000 more. I'd buy one because they have quite a few units sold, and parts are available. Also, if you go and sell it, you have a name brand product. Good Luck.
Here are some pics:
Wood for the stove. Loaded on to pallets, it comes right to the front door via the tractor.
Fresh cut 4x10" beams for my trusses. A poor attempt at siding is stacked at far left. My 2x4 and 2x6's are just outside next to the log pile.
Here is a stack of lumber with 1x1" stickers inserted between so they can dry. The beams are on top so their weight will help keep the boards below from warping.
The blades hanging: one for dull, one for sharp.
Logs ready to go on to the mill. Other lumber ready for transport to the job site.
Monster 2x14"x16' foot board that came off the mill. The grain was just to good to make 2x4's out of this one.
The LT-10 close up. Here you can see where the sawdust spits out. You do step in it, so when it gets deep you need to sweep up. People love it for their flower beds. The drive wheel covers open up for easy blade changes.
Rough cut lumber going up. Feels good to say I cut it myself. Other than plywood, not one single piece of store lumber in the whole thing.
No matter what brand you pick, ask the dealer when his next "demo day" is. No demo, no buy.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Band Saw Mill Owners
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 310
- Joined: Sun Apr 17, 2011 12:19 am
- Zip Code: 97000
- Tractors Owned: 47'Cub S/N 9516. Howard CD6 Despeeder, Howard L&S-28 Rotovators, broken front end loader, Hub City PTO clockwise converter/rpm reducer, Cub tach, Old style pointer hands analog Hobbs meter, Donaldson pre-cleaner, C-22 Sickle bar. Sears flat belt drive Buzz Saw, Model 54 blade, IH plow, Delco horn.
- Circle of Safety: Y
- Location: Oregon, USA ( the left coast )
Re: Band Saw Mill Owners
Last edited by Redcub on Sun Jan 27, 2013 7:42 pm, edited 2 times in total.
Next time you are out here in the Pacific NW see us at
The Great Oregon Steam Up in Brooks Ore, along Interstate-5 just North of Salem
http://www.antiquepowerland.com Held the last weekend of July, and 1st weekend of August
"Steam and Gasoline"
The Great Oregon Steam Up in Brooks Ore, along Interstate-5 just North of Salem
http://www.antiquepowerland.com Held the last weekend of July, and 1st weekend of August
"Steam and Gasoline"
-
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
Re: Band Saw Mill Owners
Boy, that looks really cool buds, nice material. Those trusses and purlins look very nice and I can imagine that the inside of the shed/shop is some spectacular. Looks like a nice building where you buddy has his Woodmizer setup. I am envious - gotta have the health to do that stuff though. Where it does get cheaper is when you have the raw timber on your property. Then all you have to do then if you can't cut it yourself is higher a good sawyer. Very economical that way when you have the raw stock.
Those were some nice logs
Those were some nice logs
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
-
- 10+ Years
- Posts: 310
- Joined: Sun Apr 17, 2011 12:19 am
- Zip Code: 97000
- Tractors Owned: 47'Cub S/N 9516. Howard CD6 Despeeder, Howard L&S-28 Rotovators, broken front end loader, Hub City PTO clockwise converter/rpm reducer, Cub tach, Old style pointer hands analog Hobbs meter, Donaldson pre-cleaner, C-22 Sickle bar. Sears flat belt drive Buzz Saw, Model 54 blade, IH plow, Delco horn.
- Circle of Safety: Y
- Location: Oregon, USA ( the left coast )
Re: Band Saw Mill Owners
Just tooth picks Rudi. Just tooth picks...
Well, you know the old saying about a silk purse out a sows ear. A load of rejects from the mill can turn out a nice product if you put your back in to it.
Oliver, check out these when you get a chance: Try http://www.timberking.com
http://www.cookssaw.com
http://www.norwoodsawmills.com/portable ... Qgod4iAAnw
http://www.woodlandmills.ca/?gclid=CICo ... QgodR14Aag
http://www.woodbug.com/
http://www.timberking.com/?gclid=CK_gga ... QgodV0sALQ
http://www.hud-son.com/forestry-equipme ... QgodQ2AAPA
http://www.granberg.com
And here is a magazine that looks good:
https://www.sawmillmag.com/app/home/index
And here is a sawmill buyers guide in .pdf
https://www.sawmillmag.com/public/buyer ... e_2012.pdf
Well, you know the old saying about a silk purse out a sows ear. A load of rejects from the mill can turn out a nice product if you put your back in to it.
Oliver, check out these when you get a chance: Try http://www.timberking.com
http://www.cookssaw.com
http://www.norwoodsawmills.com/portable ... Qgod4iAAnw
http://www.woodlandmills.ca/?gclid=CICo ... QgodR14Aag
http://www.woodbug.com/
http://www.timberking.com/?gclid=CK_gga ... QgodV0sALQ
http://www.hud-son.com/forestry-equipme ... QgodQ2AAPA
http://www.granberg.com
And here is a magazine that looks good:
https://www.sawmillmag.com/app/home/index
And here is a sawmill buyers guide in .pdf
https://www.sawmillmag.com/public/buyer ... e_2012.pdf
Next time you are out here in the Pacific NW see us at
The Great Oregon Steam Up in Brooks Ore, along Interstate-5 just North of Salem
http://www.antiquepowerland.com Held the last weekend of July, and 1st weekend of August
"Steam and Gasoline"
The Great Oregon Steam Up in Brooks Ore, along Interstate-5 just North of Salem
http://www.antiquepowerland.com Held the last weekend of July, and 1st weekend of August
"Steam and Gasoline"
-
- 10+ Years
- Posts: 480
- Joined: Wed Jul 28, 2010 12:53 pm
- Zip Code: 18822
- eBay ID: ranger_jer
- Circle of Safety: Y
- Location: PA, Hallstead (Susquehanna County)
Re: Band Saw Mill Owners
Thanks Redcub. I've got info from all those company's plus 3 more. Talked to a couple of them as well. I should be making what is an informed decision this week.
22 sickle bar mower x2
23A tandem disc harrow
144 cultivator (#53 & #97 spring tooth)
154 leveling and grader blade
189 moldboard plow 2-way
193 moldboard plow x2
spring tooth harrows
David Bradley planter (modded for Cub)
23A tandem disc harrow
144 cultivator (#53 & #97 spring tooth)
154 leveling and grader blade
189 moldboard plow 2-way
193 moldboard plow x2
spring tooth harrows
David Bradley planter (modded for Cub)
-
- Similar Topics
- Replies
- Views
- Last post
-
- 6
- 1367
-
by Arosselo
Sat Apr 08, 2023 7:16 pm
-
-
Calling all Howard Rotavator L&S-28 owners
by Turren » Thu Apr 20, 2023 7:39 pm » in Other Tractors and Machinery - 1
- 1088
-
by Bob McCarty
Sat Apr 22, 2023 5:24 pm
-
-
-
Owners of Howard CD6 Despeeder/Speed Reduction Unit
by FarmallCub14660 » Thu Sep 15, 2022 8:16 pm » in Other Tractors and Machinery - 4
- 265
-
by Bill Hudson
Sun Sep 25, 2022 10:45 am
-
Return to “Other Tractors and Machinery”
Who is online
Users browsing this forum: No registered users and 1 guest