Got a project that you are working on that is not a tractor? Maybe a barn to hold your tractors or just fun stuff like woodworking, glass, tools, sheds, gardens, custom implements, etc., this is the place to talk about it.
Moderator:Team Cub
2 posts
• Page 1 of 1
Marion(57 Loboy)
10+ Years
Posts: 687
Joined: Sat Mar 29, 2003 4:17 pm
Zip Code: 00000
Tractors Owned: 1957 International Cub Loboy; C-3 finish mower; L-54 blade; L-F194 plow incl coulter and jointer;L-38 disk harrow. Leinbach FH back blade.
Postby Marion(57 Loboy) » Fri Jan 25, 2013 10:26 pm
We finally got around to redoing the basement storage shelves. There were 2ft wide "shelves" like this on three walls in the basement. One problem was that the electric panel was blocked, the other was that they were very poorly constructed of scantily used 1-1/2"sq framing and 3/8" plywood. All the framing was butt-jointed and fastened with one 10-penny nail per joint. They were wobbly, and with just one shelf at the floor and the other at 4ft, it only resulted in everything stacked on top of the other and wasted space.
First up was to prep the bare block and paint with drylok.
So after a trip to Menards and some one on one time with my Shopsmith here is the new shelf unit.