Wed Jan 02, 2013 6:32 pm
I have two galvanized hoppers they have simular feed wheels and mounts as a international, but i have looked around and cant find any like them. Wondering if someone has seen these before, thankshttp://s696.beta.photobucket.com/user/h ... ary/hopper
Wed Jan 02, 2013 9:22 pm
OK I will take a stab. I think these hoppers are pre-Cub, etc. equipment, like REALLY early H's and M's, and F series Farmalls.
Sat Jan 05, 2013 1:49 pm
thanks for the info, i found some on the Wisconsin historical society that looked like them. I will post some pics and the model #'s of what i found.
Wed Jan 09, 2013 9:37 am
I've got a couple of those too! They came with a 1968 Farmall 140 I bought a few years ago that had a BUNCH of implements and parts. I have no idea what that hopper fits.....I just know I've not seen another like it except for sale at RPRU, and yours. Let us know what all you find out and post pictures if possible.
Thu Jan 10, 2013 8:34 pm
here's a link to what i found on the Wisconsin historical society it is in the International Harvester General Catalog -- No. 49 -- 1949, there are a few pages with the same hopper on different tractors its on page 206 the link may not show wellhttp://content.wisconsinhistory.org/uti ... DMROTATE=0
Thu Jan 10, 2013 9:47 pm
Fertilizer hoppers. You can find them in PLA-2A. Don't have the right picture (need a front view), but probably for the A-33-a and B-33-A fertilizer units. If the top opening is round it is the A/B. Oval, it is the HM-33. 1940-1942
Last edited by bob in CT on Thu Jan 10, 2013 9:56 pm, edited 1 time in total.
Thu Jan 10, 2013 9:49 pm
I believe Al has it correct,Fertilizer hopper, H or M
Thu Jan 10, 2013 10:00 pm
My scan of PLA-2A is available in (NEW) manuals. It is a 124 meg file, though (786 PAGES)
Thu Jan 10, 2013 10:23 pm
hard to tell from the pics, I was going by him having 2 of them, there would have been 2 on a H or M
Mon Jan 14, 2013 9:36 pm
Anyone think there is a market for these i have no need for them i do not have the drives for them just two hoppers and they are in decent shape not rusted out
Tue Jan 15, 2013 3:55 pm
Someone is looking for them......Don't scrap them or throw them away. Being in VA, I'm sure Boss would be intrested.
Tue Jan 15, 2013 4:57 pm
Keep in mind that the hoppers are what rust out so good ones must have some value even as extras. I asked you a specific question on the shape. Having the correct part number and application is the first step in finding the right home for these. I hate to junk old, good, parts. Somebody wants them...
Tue Jan 15, 2013 6:47 pm
IH tended to use common hoppers across the line. That style preceeded the round ones we typically see on a Cub. Anything for the early letter series tractors and before plus a lot of non-tractor applications used those hoppers.
Tue Jan 15, 2013 8:21 pm
bob, they have the oval shape at the top and the two feed wheels inside
Tue Jan 15, 2013 8:58 pm
hbfarm3 wrote:bob, they have the oval shape at the top and the two feed wheels inside
PM your email address to me and I will send you the pages from the manual. The entire manual is available, but it is pretty big.
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.