This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
154 cub cubic inch.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
154 cub cubic inch.
Anybody know the cu. in. displacement of a 154 cub loboy ?
-
- Cub Pro
- Posts: 4436
- Joined: Wed Dec 26, 2007 7:45 pm
- Zip Code: 32536
- Circle of Safety: Y
- Location: FL, Crestview
Re: 154 cub cubic inch.
It has a total of 59.5 cu.in. with a displacement of 6.5 to 1.
Screwstick #3934
FCub - LoBoy - Numbered Series - Power Unit Databases
FCub - LoBoy - Numbered Series - Power Unit Databases
-
- 10+ Years
Re: 154 cub cubic inch.
Thank you. I am putting a different carb on it because it came with an International one and as far as I am concerned they really suck. I found one on an old wisconsin 2 cl. that I think is compatible. Hope it works. Harold
-
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
Re: 154 cub cubic inch.
Harold:
The IH 3/4" Updraft Carb was designed specifically for the needs of the C-60 engine. If your carb is not performing as it should then you need to investigate the reasons causing this lack of performance.
The IH 3/4" Updraft Carb was designed specifically for the needs of the C-60 engine. If your carb is not performing as it should then you need to investigate the reasons causing this lack of performance.
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
-
- 10+ Years
Re: 154 cub cubic inch.
I know what the problem is. International built a carb that wasnt stupid proof. It is really cold blooded and has to be cranked alot to get started even at 60 degrees. The bolts were overtightened so much that you can no longer get a good seal and I believe it sucks air.
-
- Team Cub
- Posts: 11880
- Joined: Tue May 25, 2004 8:02 pm
- Zip Code: 80501
- Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
- Circle of Safety: Y
- Location: CO, Longmont
Re: 154 cub cubic inch.
The top can be flattened, but if it's leaking air, it would also be leaking gas.
Bob
Bob
"We don't need to think more,
we need to think differently."
-Albert Einstein
we need to think differently."
-Albert Einstein
-
- 10+ Years
- Posts: 4131
- Joined: Thu Nov 09, 2006 11:26 pm
- Zip Code: 61722
Re: 154 cub cubic inch.
Dont waste your time on the Wisconsin 2 cylinder carb!---IT WONT WORK! thanks; sonny
-
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
Re: 154 cub cubic inch.
welderskelter wrote:I know what the problem is. International built a carb that wasnt stupid proof. It is really cold blooded and has to be cranked alot to get started even at 60 degrees. The bolts were overtightened so much that you can no longer get a good seal and I believe it sucks air.
The carb isn't stupid proof - no such thing. Anybody can screw up a carb, - that is pretty easy. However, IH did build a carb that could be easily maintained by the average farmer as long as they read the manual.
However, just because somebody boogered it up doesn't mean it is junk. If you truly think it is junk - mail it to me - I will take it off your hands - not a problem. And I will give you what it is worth to me as a parts carb. Or you can fix it yourself and we can give you the help you need.
How To Make an Updraft Carb Straightening Jig
How To Make a Simple Platform to Straighten Warped Carb Tops
Before you take the carb apart - study the parts breakdown below, so that when you do take it apart you don't break anything. Once the top is straightened then you need to lap the bottom half of the carb. First you have to take the idle tube out. Be careful they break easy and are expensive. Here is the parts breakdown of the carb:
Mr. Jesse wrote this article on How To Straighten IH Updraft Carburetor Tops. His jig is different than mine and Dan's. We miss both of them.
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
-
- 10+ Years
- Posts: 4131
- Joined: Thu Nov 09, 2006 11:26 pm
- Zip Code: 61722
Re: 154 cub cubic inch.
Rudi!!!!!!!!!----Thanks for the pic!!! you just helped me! NOW I am ready to attack my 49 carb!LOL!! thanks; sonny
-
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
Re: 154 cub cubic inch.
You are welcome Sonny
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
-
- 10+ Years
- Posts: 1172
- Joined: Tue Oct 19, 2004 7:10 am
- Zip Code: 29130
- Tractors Owned: fcub(5)
tricycle cub
154 (4)
Earthmaster (2)
JD 40T, JD 420 crawler-loader, JD MT
JD Unstyled A, Styled A, Unstyled AR
JD H
Centaur Tractor
AC Model C, G
Cub Cadets (9)
Gibson D
Red-E - Circle of Safety: Y
- Location: SC, Ridgeway
Re: 154 cub cubic inch.
The carbs on a tjd/thd wisconsin engine will work except the levers may not be on the correct side. Should be an easy switch if that is the route you want to go.
The IHC carb is simple, not much to go wrong. Unplug all the ports, set the float by fuel level not float level, flatten the top, and all should work.
A top level plate is simple to make, literally a few minutes with a drill and you can make one.
The IHC carb is simple, not much to go wrong. Unplug all the ports, set the float by fuel level not float level, flatten the top, and all should work.
A top level plate is simple to make, literally a few minutes with a drill and you can make one.
-
- 10+ Years
Re: 154 cub cubic inch.
Thank you Landreao. Its off of a THD. Hope it works, got to wait till it warms up. Its been way below zero up here and I dont have much insulation in the shop for that. Thanks
-
- 10+ Years
- Posts: 7388
- Joined: Sat Jul 22, 2006 5:02 pm
- Zip Code: 00000
- Location: in northern usa
Re: 154 cub cubic inch.
Just a note of caution;
I have noticed a lot of these carbs has the #25 o ring gasket missing on the #12 nozzle discharge. Most might not think about it but the gas level in the carb bowel is above this gasket. Thus you can have a running rich problem down the road. If its not there its missing it. Hard starting can be the idle butterfly is open too much to make it idle from a high gas level with the float being too high. With the carb / float being set and the idle mix being set it should start right up on the choke. I've made the worst, abused carbs work again.
i get my carb kits from http://www.mcdonaldcarb.com He has parts for the IH & zenith carb and parts for most tractors. He's my number 2 go to guy besides TM.
I have noticed a lot of these carbs has the #25 o ring gasket missing on the #12 nozzle discharge. Most might not think about it but the gas level in the carb bowel is above this gasket. Thus you can have a running rich problem down the road. If its not there its missing it. Hard starting can be the idle butterfly is open too much to make it idle from a high gas level with the float being too high. With the carb / float being set and the idle mix being set it should start right up on the choke. I've made the worst, abused carbs work again.
i get my carb kits from http://www.mcdonaldcarb.com He has parts for the IH & zenith carb and parts for most tractors. He's my number 2 go to guy besides TM.
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.
-
- Cub Pro
- Posts: 10290
- Joined: Mon Oct 24, 2005 8:35 pm
- Zip Code: 23962
- eBay ID: dmb2613
- Circle of Safety: Y
- Location: VA. Randolph
Re: 154 cub cubic inch.
The 154 cub only turns 1950 or so rpm , what does the Wisconsin engine turn?
It may work, I do not know how well though.
It may work, I do not know how well though.
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
-
- Team Cub Mentor
- Posts: 20399
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: 154 cub cubic inch.
3600 rpms.Boss Hog wrote:The 154 cub only turns 1950 or so rpm , what does the Wisconsin engine turn? It may work, I do not know how well though.
Wisconsin Instruction Book and Parts List for Models TH, THD, TJD, 2 cylinder, 53.9 cubic inch engines lists 27 different carburetor, Zenith Assembly numbers. Only one of the 27 carburetors matches the internal parts for the Cub's engine.
I have an excuse. CRS.
Return to “Lo-Boy Series - 154, 184, 185”
Who is online
Users browsing this forum: No registered users and 1 guest