Farmall Cub Forum -- Questions and answers to all of your Cub related issues.
Moderator: Team Cub
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Hey - you're way ahead of the curve. I owned a cub for 40 years before I knew the fan had to be oiled....something about a previous owner not providing the manual maybe???
Be sure you get the inside part right side up, don't ask how I know!
"It is impossible for a man to learn what he thinks he already knows." -Epictetus
252646 & 221525. 195897 (Gone but not forgotten!)
Rebuilt fan is installed along with new belts and replacement of some of the "field engineered" parts the previous hack....I mean owner installed. Changed the oil, filter, coolant, and lubed everything (I think) and took it for a spin. Seems to work well AND no screeching! Starts much easier also, one pull on the starter and no choke! A small coolant leak I think is coming from the overflow tube at the top of the radiator. I noticed what appears to be a crack where the tube attaches at the fill neck, but I put in a little too much when I replaced it so I'm hoping that will stop once the level is down a bit. If not I guess I'll be doing some soldering in spring along with tackling that float/needle valve, but until then I'll just shut the gas off.
Thanks everyone for your help!!!!
Who is online
Users browsing this forum: Sailor and 2 guests