I called the local IH dealer and asked what carb kit I'd need for my Carter carburetor and the guy in the parts section said there were two and I'd had to bring in the carburetor to find the match. I'm assuming I can find this online and for a better price. Any ideas? The writing is worn. I think it says Carter Ut or U-. The number under it is rubbed off. There is a number on the manifold facing piece. It is 0-1396.
Thanks!
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
carb kit for my Super A-1
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 160
- Joined: Mon May 07, 2012 9:38 am
- Zip Code: 27502
- Tractors Owned: 1954 super A-1 6-volt
- Location: NC
-
- Team Cub Mentor
- Posts: 20370
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: carb kit for my Super A-1
I&T manual: Super A and AV gas = UT733S or SA
Super A and AV Ker. or Dist. (early) UT734S
Edit: Providing the carburetor has not been change.
Super A and AV Ker. or Dist. (early) UT734S
Edit: Providing the carburetor has not been change.
I have an excuse. CRS.
-
- 10+ Years
- Posts: 160
- Joined: Mon May 07, 2012 9:38 am
- Zip Code: 27502
- Tractors Owned: 1954 super A-1 6-volt
- Location: NC
Re: carb kit for my Super A-1
It was originally a dist. or Ker. tractor. In fact, the manifold still is. Is the model number printed anywhere else but on the front? I can't find a picture online for these two. I had seen a kit here: http://www.steinertractor.com/ABC231-basic-carburetor-repair-kit-carter but it says it is for the version with the cast iron top body. I'm not sure, but mine looks aluminum.
Joel
-
- 10+ Years
- Posts: 613
- Joined: Mon Feb 03, 2003 1:18 pm
- Zip Code: 27055
- Tractors Owned: 1951 Super A
1955 Cub Lo-boy
1955 Ferguson TO-35 - Circle of Safety: Y
- Location: NC, Yadkinville
Re: carb kit for my Super A-1
You will probably be better off with a kit from the dealer if they can get one. Far superior to most aftermarket kits and more complete. Make sure you mention distillate/kerosene to the dealer.
The four most expensive words in tractor restoration: "We might as well..."
- SONNY
- 10+ Years
- Posts: 4107
- Joined: Thu Nov 09, 2006 11:26 pm
- Zip Code: 61722
Re: carb kit for my Super A-1
I agree with Daniel! ---deal with the dealer--even if it costs more,---save grief later down the road!---I have best luck by taking old/worn/broken parts in hand and slap them on the nice clean parts counter!! LOL! usually gets the right parts every time!---cant do that on the internet! thanks; sonny
-
- 10+ Years
- Posts: 160
- Joined: Mon May 07, 2012 9:38 am
- Zip Code: 27502
- Tractors Owned: 1954 super A-1 6-volt
- Location: NC
Re: carb kit for my Super A-1
Thanks Eugene, Daniel and Sonny! I just read my previous comment and noticed I was too distracted by my problem to be grateful. I really appreciate of your help. All y'all tips are great. I'll drop in on the dealer and make sure I make note of the part number for next time.
Thanks.
Thanks.
Joel
Return to “Farmall A, Super A, AV, 100, 130 & 140”
Who is online
Users browsing this forum: No registered users and 13 guests