140 Diff. Bearing Retainer

Farmall 100, 1954 - 1973

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.

140 Diff. Bearing Retainer

Postby cubbrian » Tue Jan 01, 2013 7:21 pm

While putting new seals in the finals of a 140, I found that part of the flange was broken and only being held in place by one of the three bolts that hold the differential bearing retainer in place. I purchased a replacement, but it does not have a groove to install the o-ring on the retainer. My questions are: 1) will it hurt to leave the cracked retainer in place, and 2) can I use a retainer that does not have the groove for the o-ring?
cubbrian
501 Club
501 Club
 
Posts: 752
Joined: Sun Apr 08, 2007 7:47 pm
Location: IN, New Harmony
Zip Code: 47631
Tractors Owned: 1955 Cub w/9 different 1 point implements
1948 Cub
1948 McCormick W-6
1949 H
1949 M
1961 560 w/ 412 fast hitch plow
1966 140
1973 666
Allis Chalmers C w/sickle mower
Case 400
Economy 14 hp tractor

Re: 140 Diff. Bearing Retainer

Postby Boss Hog » Tue Jan 01, 2013 7:29 pm

Sounds like a judgment call. If you were to use the replacement retainer I would use some sealant or you may have an oil leak.
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg

8th Va fest link viewtopic.php?f=8&t=81392&p=657790#p657790
User avatar
Boss Hog
Cub Pro
Cub Pro
 
Posts: 9654
Joined: Mon Oct 24, 2005 8:35 pm
Location: VA. Randolph
Zip Code: 23962
eBay ID: dmb2613
Circle of Safety Award
Circle of Safety: Y

Re: 140 Diff. Bearing Retainer

Postby Gary Dotson » Wed Jan 02, 2013 7:33 am

I certainly wouldn't re-use the broken retainer, those things carry a lot of load. I think you'll be fine with a little sealant on the replacement.
Gary Dotson
Team Cub Mentor
Team Cub Mentor
 
Posts: 2515
Joined: Thu Aug 03, 2006 6:20 am
Location: OH West Mansfield
Zip Code: 43358
Tractors Owned: 48 Cub Diesel (Cubota)
53 Cockshutt 20 restored (Shooter)
52 Cockshutt 20 unrestored
47 Leader "B" (Herckie)
49 Leader "D" (Princess)
49 Leader "D" very rough
48 Leader "D" unrestored
Kubota B6200E
Kubota B6200HST
Kubota B8200HST-D
Circle of Safety Award
Circle of Safety: Y

Re: 140 Diff. Bearing Retainer

Postby cubbrian » Fri Jan 04, 2013 2:29 pm

Could a machine shop cut a groove for the o-ring in the retainer I have and if so, what would that cost?
cubbrian
501 Club
501 Club
 
Posts: 752
Joined: Sun Apr 08, 2007 7:47 pm
Location: IN, New Harmony
Zip Code: 47631
Tractors Owned: 1955 Cub w/9 different 1 point implements
1948 Cub
1948 McCormick W-6
1949 H
1949 M
1961 560 w/ 412 fast hitch plow
1966 140
1973 666
Allis Chalmers C w/sickle mower
Case 400
Economy 14 hp tractor

Re: 140 Diff. Bearing Retainer

Postby Gary Dotson » Sat Jan 05, 2013 8:16 am

I'm sure a decent machine shop could cut the o-ring groove, I've got no idea what they would charge, you'll just have to ask them. It should be a pretty simple lathe operation, though.
Gary Dotson
Team Cub Mentor
Team Cub Mentor
 
Posts: 2515
Joined: Thu Aug 03, 2006 6:20 am
Location: OH West Mansfield
Zip Code: 43358
Tractors Owned: 48 Cub Diesel (Cubota)
53 Cockshutt 20 restored (Shooter)
52 Cockshutt 20 unrestored
47 Leader "B" (Herckie)
49 Leader "D" (Princess)
49 Leader "D" very rough
48 Leader "D" unrestored
Kubota B6200E
Kubota B6200HST
Kubota B8200HST-D
Circle of Safety Award
Circle of Safety: Y

Re: 140 Diff. Bearing Retainer

Postby Jim Becker » Sat Jan 05, 2013 11:05 am

Does the groove really need to be there? Without the parts in hand, this is just a guess. If the o-ring is simply put on as far as it will go, will it still contact a machined surface of the case so it will seal? Will it interfere with contact/fitment of the retainer and shims? If it will seal and not interfere with assembly, just put it together.
User avatar
Jim Becker
Team Cub
Team Cub
 
Posts: 11850
Joined: Sun Feb 02, 2003 3:14 pm
Location: TX/MN
Zip Code: 75048
Circle of Safety Award
Circle of Safety: Y

Re: 140 Diff. Bearing Retainer

Postby Boss Hog » Sat Jan 05, 2013 12:22 pm

Jim , it is made just like a cub , but larger. I am sure you have seen one off a cub
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg

8th Va fest link viewtopic.php?f=8&t=81392&p=657790#p657790
User avatar
Boss Hog
Cub Pro
Cub Pro
 
Posts: 9654
Joined: Mon Oct 24, 2005 8:35 pm
Location: VA. Randolph
Zip Code: 23962
eBay ID: dmb2613
Circle of Safety Award
Circle of Safety: Y


Return to Farmall 100 Series, 100, 130, 140

Who is online

Users browsing this forum: No registered users and 1 guest