This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
1975 Farmall 140 - Only Fires When I Let off of Starter
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 2558
- Joined: Tue Aug 10, 2010 6:38 pm
- Zip Code: 35630
- Circle of Safety: Y
1975 Farmall 140 - Only Fires When I Let off of Starter
Working on a 1975 "key start" Farmall 140 tractor, and I just completed a fresh tune up today with new points, plugs, rotor, and condensor. Wires & cap looked good, so left them alone. Carburetor has been professionally rebuilt.
This tractor has 150 psi on all 4 cylinders, yet it starts harder than my other 140's....even after the tune up. I have noticed that when starting it, you can hold down on the key and turn the engine over from "now til next month", and it will not
'fire' or 'crank up' Until you let go of the key (stop turning over on the starter).
I have never seen a tractor do this....what is the problem!? I want it to start up on the first turn or two without havin to let go of the key.
This tractor has 150 psi on all 4 cylinders, yet it starts harder than my other 140's....even after the tune up. I have noticed that when starting it, you can hold down on the key and turn the engine over from "now til next month", and it will not
'fire' or 'crank up' Until you let go of the key (stop turning over on the starter).
I have never seen a tractor do this....what is the problem!? I want it to start up on the first turn or two without havin to let go of the key.
Regards,
Chase
205-368-5339
ihfarmallrtr@gmail.com
Follow my page "Alabama Tractor Pickers" on YouTube & Facebook!
Chase
205-368-5339
ihfarmallrtr@gmail.com
Follow my page "Alabama Tractor Pickers" on YouTube & Facebook!
-
- Cub Pro
- Posts: 10290
- Joined: Mon Oct 24, 2005 8:35 pm
- Zip Code: 23962
- eBay ID: dmb2613
- Circle of Safety: Y
- Location: VA. Randolph
Re: 1975 Farmall 140 - Only Fires When I Let off of Starter
Have you checked to see if it is firing while the starter is turning? May be as simple as a bad switch. Did it do this before you tuned it up?
Boss
Boss
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
-
- 10+ Years
- Posts: 2558
- Joined: Tue Aug 10, 2010 6:38 pm
- Zip Code: 35630
- Circle of Safety: Y
Re: 1975 Farmall 140 - Only Fires When I Let off of Starter
Yes it did it before. I has the "original" looking switch. hex nut on the outside holding it inplace unlike the common replacements that have a 'ring' type nut. It has the blade connectors on the rear of the switch sticking straight back. Original connector is long gone, but it looks original to me. The key says Indak....like most switches I've seen.
I can check to see if it is getting fire while cranking it over, but will need someone else's help tomorrow to hold the test light.
It runs good once started, but it just starts weird.
I can check to see if it is getting fire while cranking it over, but will need someone else's help tomorrow to hold the test light.
It runs good once started, but it just starts weird.
Regards,
Chase
205-368-5339
ihfarmallrtr@gmail.com
Follow my page "Alabama Tractor Pickers" on YouTube & Facebook!
Chase
205-368-5339
ihfarmallrtr@gmail.com
Follow my page "Alabama Tractor Pickers" on YouTube & Facebook!
-
- Team Cub Mentor
- Posts: 20389
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: 1975 Farmall 140 - Only Fires When I Let off of Starter
Two potential problem areas. Ignition switch and the solenoid.
Solenoid. Check for voltage at the "I" for ignition terminal, one of the smaller terminals, while cranking over engine.
Ignition switch fault. Normally the switch has a start position and a run position. Start position engages the solenoid and the ignition at the same time. Run position only the ignition.
Solenoid. Check for voltage at the "I" for ignition terminal, one of the smaller terminals, while cranking over engine.
Ignition switch fault. Normally the switch has a start position and a run position. Start position engages the solenoid and the ignition at the same time. Run position only the ignition.
I have an excuse. CRS.
-
- 10+ Years
- Posts: 2558
- Joined: Tue Aug 10, 2010 6:38 pm
- Zip Code: 35630
- Circle of Safety: Y
Re: 1975 Farmall 140 - Only Fires When I Let off of Starter
I'll check it tomorrow Eugene. I had a feeling it was probably the switch or the way it was wired; but since I had never seen this problem before, I thought I would ask to see if yall have ran into it.
What would cause the tractor to not start on the first couple of turns?? I checked timing too and the rotor was pointing just a few ticks above 3 o'clock (#1). I might move the distributor a little tomorrow or get a timing light out just to fine tune it.
What would cause the tractor to not start on the first couple of turns?? I checked timing too and the rotor was pointing just a few ticks above 3 o'clock (#1). I might move the distributor a little tomorrow or get a timing light out just to fine tune it.
Regards,
Chase
205-368-5339
ihfarmallrtr@gmail.com
Follow my page "Alabama Tractor Pickers" on YouTube & Facebook!
Chase
205-368-5339
ihfarmallrtr@gmail.com
Follow my page "Alabama Tractor Pickers" on YouTube & Facebook!
-
- Cub Pro
- Posts: 10290
- Joined: Mon Oct 24, 2005 8:35 pm
- Zip Code: 23962
- eBay ID: dmb2613
- Circle of Safety: Y
- Location: VA. Randolph
Re: 1975 Farmall 140 - Only Fires When I Let off of Starter
Timing should go with the tune up. unless someone has changed something on it the solenoid should not have an effect on it. It does not have a wire going to the coil from the factory , like some automobiles do.
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
-
- 10+ Years
- Posts: 2558
- Joined: Tue Aug 10, 2010 6:38 pm
- Zip Code: 35630
- Circle of Safety: Y
Re: 1975 Farmall 140 - Only Fires When I Let off of Starter
Once I get all of that done, I believe I am gonna adjust the valves too. Probably never have been done!
Do you think the reason for it not starting quick is that the timing might need fine tuning?
Do you think the reason for it not starting quick is that the timing might need fine tuning?
Regards,
Chase
205-368-5339
ihfarmallrtr@gmail.com
Follow my page "Alabama Tractor Pickers" on YouTube & Facebook!
Chase
205-368-5339
ihfarmallrtr@gmail.com
Follow my page "Alabama Tractor Pickers" on YouTube & Facebook!
-
- Cub Pro
- Posts: 10290
- Joined: Mon Oct 24, 2005 8:35 pm
- Zip Code: 23962
- eBay ID: dmb2613
- Circle of Safety: Y
- Location: VA. Randolph
Re: 1975 Farmall 140 - Only Fires When I Let off of Starter
I think you have a bad switch, but you do need to set the timing and adjust the valves, I also pack the front wheel bearings in the tractors when I first get them.That is something that is seldom done
Boss
Boss
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
-
- 10+ Years
- Posts: 2558
- Joined: Tue Aug 10, 2010 6:38 pm
- Zip Code: 35630
- Circle of Safety: Y
Re: 1975 Farmall 140 - Only Fires When I Let off of Starter
Yep! That's on my list. Steering is good and tight on this one, so no need to tear into that. Noticed that the fan hub is wobbly. Gonna have to get in there and fix that. Don't know if it's the water pump or the fan hub. I think I heard a little bit a noise, so might be the water pump.
Regards,
Chase
205-368-5339
ihfarmallrtr@gmail.com
Follow my page "Alabama Tractor Pickers" on YouTube & Facebook!
Chase
205-368-5339
ihfarmallrtr@gmail.com
Follow my page "Alabama Tractor Pickers" on YouTube & Facebook!
-
- Cub Pro
- Posts: 10290
- Joined: Mon Oct 24, 2005 8:35 pm
- Zip Code: 23962
- eBay ID: dmb2613
- Circle of Safety: Y
- Location: VA. Randolph
Re: 1975 Farmall 140 - Only Fires When I Let off of Starter
Water pump
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
-
- 10+ Years
- Posts: 2558
- Joined: Tue Aug 10, 2010 6:38 pm
- Zip Code: 35630
- Circle of Safety: Y
Re: 1975 Farmall 140 - Only Fires When I Let off of Starter
Boss Hog wrote:Water pump
Ok. Thanks. My grandfather has replaced a couple, but couldn't remember if that was why the fan hub wobbled. Not that bad of a job. Guess it's time to go shopping!
Regards,
Chase
205-368-5339
ihfarmallrtr@gmail.com
Follow my page "Alabama Tractor Pickers" on YouTube & Facebook!
Chase
205-368-5339
ihfarmallrtr@gmail.com
Follow my page "Alabama Tractor Pickers" on YouTube & Facebook!
-
- 10+ Years
- Posts: 133
- Joined: Fri Sep 02, 2011 6:22 pm
- Zip Code: 33876
Re: 1975 Farmall 140 - Only Fires When I Let off of Starter
I'm guessing the wiring on the ignition /starter switch. You have one of the wires in the wrong position on the switch.
The wire to the points(via the coil) should be hot in both the start and run positions on the switch with the key in the start position.Sounds like when you stop cranking it, the hot position reverts(for lack of a better term) to the run position and there is enough rotation left in the cranking
for it to fire.
The wire to the points(via the coil) should be hot in both the start and run positions on the switch with the key in the start position.Sounds like when you stop cranking it, the hot position reverts(for lack of a better term) to the run position and there is enough rotation left in the cranking
for it to fire.
-
- Team Cub Mentor
- Posts: 6018
- Joined: Thu Jun 07, 2007 9:34 am
- Zip Code: 06040
- Tractors Owned: 77 Cub (red); 74 Cub; 52 Cub; 50 Cub ( post-demo)
- Circle of Safety: Y
- Location: CT, Manchester
Re: 1975 Farmall 140 - Only Fires When I Let off of Starter
This is the inverse of a bad ballast resistor problem (if there is one?). Cranking, the ballast resistor is bypassed to give full voltage to the ignition to compensate for the voltage drop when operating the starter. The point current then goes through the ballast resistor to save the points from arcing when running. If the ballast is bad, the engine fires up under cranking and switches off immediately when in the run position. I agree that something may not be wired correctly, but it could be the ballast is bad too.
Voltage should be around 9 volts at the points in run position- full battery cranking voltage in start position.
Voltage should be around 9 volts at the points in run position- full battery cranking voltage in start position.
-
- 10+ Years
- Posts: 5228
- Joined: Tue Jan 12, 2010 2:08 pm
- Zip Code: 12514
- Circle of Safety: Y
Re: 1975 Farmall 140 - Only Fires When I Let off of Starter
Bob mentioned it, if it has a ballast resistor between the key switch and the coil, it is probably bad,just unplug the wires and jumper them together, if it runs the ballast is NG, if you have no external ballast the resistor is built in to the switch and its probably bad
Tim
Tim
-
- 10+ Years
- Posts: 2558
- Joined: Tue Aug 10, 2010 6:38 pm
- Zip Code: 35630
- Circle of Safety: Y
Re: 1975 Farmall 140 - Only Fires When I Let off of Starter
Thanks for the help everyone.
I'm gonna get some new 2 GA Battery Cables for it too since the ones on it could stand to be a bit bigger. A new battery ground strap too, just to make things "right". I've looked in the CASE/IH parts site, but it doesn't list the particular lengths of the cables. I'd like to get them the exact lengths per IH Specs so they don't hang out in the way and look bad. This is a "Key Start" tractor.
I'm gonna get some new 2 GA Battery Cables for it too since the ones on it could stand to be a bit bigger. A new battery ground strap too, just to make things "right". I've looked in the CASE/IH parts site, but it doesn't list the particular lengths of the cables. I'd like to get them the exact lengths per IH Specs so they don't hang out in the way and look bad. This is a "Key Start" tractor.
Regards,
Chase
205-368-5339
ihfarmallrtr@gmail.com
Follow my page "Alabama Tractor Pickers" on YouTube & Facebook!
Chase
205-368-5339
ihfarmallrtr@gmail.com
Follow my page "Alabama Tractor Pickers" on YouTube & Facebook!
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Original 1975 International 140 Attachment(s)
by BSR » Thu Mar 03, 2022 3:19 pm » in Farmall A, Super A, AV, 100, 130 & 140 - 15
- 760
-
by 69ranger
Thu Mar 17, 2022 2:42 pm
-
-
-
Total starter frustration,
by Dusty B » Tue May 18, 2021 7:48 pm » in Farmall A, Super A, AV, 100, 130 & 140 - 5
- 334
-
by Dusty B
Wed Jun 02, 2021 7:11 am
-
-
-
Starter swap on a 1950 SA
by Ole Timey Farmin » Sat Jun 18, 2022 5:03 pm » in Farmall A, Super A, AV, 100, 130 & 140 - 2
- 175
-
by Gary Dotson
Sun Jun 19, 2022 7:46 am
-
-
-
NAPA Part number for starter ?
by inairam » Sat Jul 16, 2022 6:11 pm » in Farmall A, Super A, AV, 100, 130 & 140 - 29
- 865
-
by staninlowerAL
Tue Aug 23, 2022 11:55 am
-
Return to “Farmall A, Super A, AV, 100, 130 & 140”
Who is online
Users browsing this forum: No registered users and 1 guest