What should a fellow pay for a Super M ,(tough looking fence row paint), running good with average rubber?
The front door is missing on the rad. This one has new ignition on it but has sat outside in the weather. Don't know why the guy couldn't throw a tarp over it if he didn"t have stable room.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Value of Good runningSUPER M...wife's XMAS gift.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 602
- Joined: Wed Apr 20, 2005 6:41 am
- Location: Norwich,Ontario
- Contact:
Value of Good runningSUPER M...wife's XMAS gift.
IHC made a quality machine and was leader of the pack.Let's keep them running,
-
- 10+ Years
- Posts: 602
- Joined: Wed Apr 20, 2005 6:41 am
- Location: Norwich,Ontario
- Contact:
Re: Value of Good runningSUPER M...wife's XMAS gift.
I can't believe no one on here has an idea of the value of a good running Super M.
Perhaps this topic has been over done previously or else everyone is jealous. I am going deer hunting.
Perhaps this topic has been over done previously or else everyone is jealous. I am going deer hunting.
IHC made a quality machine and was leader of the pack.Let's keep them running,
-
- 10+ Years
- Posts: 916
- Joined: Sun Feb 02, 2003 10:44 pm
- Zip Code: 60936
- Tractors Owned: 47 Cub SN 8664
48 Cub
50 Demo
54 Cub
3-55 Cub
2-56 Cub
55 LOBOY SN 876
57 LOBOY
58 French Cub
2- 60 LOBOY
69 Cub
54 Super M
42 H
48 H
57 300LP
57 450
Cub Cadet 123
Cub Cadet 149 - Circle of Safety: Y
- Location: Gibson City, IL
- Contact:
Re: Value of Good runningSUPER M...wife's XMAS gift.
I would say pending year, 1200 to 1500. If it a stage II or 54 a bit more. In my area they are bringing that anyway. Now good tires add a lot more value in my opinion, since they cost so much these days. My opinion with out any pics/
-
- 10+ Years
- Posts: 4948
- Joined: Tue Jun 08, 2004 3:04 pm
- Zip Code: 14559
- Circle of Safety: Y
- Location: Rochester, NY
Re: Value of Good runningSUPER M...wife's XMAS gift.
Ida, this is primarily a Cub forum so as you've certainly noticed, the other model forums don't get a lot of play by comparison.
Last spring, I bought a 1953 Stage II Louisville Super M with wide front, power steering, and new tires all the way around. I paid on the North side of $2500, but South of $3000. I figured there was easily $1700+ worth of tires on the tractor.
Last spring, I bought a 1953 Stage II Louisville Super M with wide front, power steering, and new tires all the way around. I paid on the North side of $2500, but South of $3000. I figured there was easily $1700+ worth of tires on the tractor.
-
- 10+ Years
- Posts: 602
- Joined: Wed Apr 20, 2005 6:41 am
- Location: Norwich,Ontario
- Contact:
Re: Value of Good runningSUPER M...wife's XMAS gift.
So what makes a stage 11Super- M stand out from the rest.
IHC made a quality machine and was leader of the pack.Let's keep them running,
-
- 10+ Years
- Posts: 4948
- Joined: Tue Jun 08, 2004 3:04 pm
- Zip Code: 14559
- Circle of Safety: Y
- Location: Rochester, NY
Re: Value of Good runningSUPER M...wife's XMAS gift.
Stage II (as in aye-aye not one-one, the roman numeral 2) adds distributor-drive live hydraulics as "standard" equipment, the battery relocated to a box under the seat to make room for the hydraulic reservoir under the gas tank, stronger 3-bolt starter mount.
The difference between a plain M and a Stage I is mainly a few cubic inches in the engine, disk brakes, and faster 3rd and 4th gears.
All 1952 Super Ms are Stage I. IH transitioned to Stage II in early 1953 and continued to produce them into early 1954.
Some "eggheads" (like me) will point out that the Super MTA is technically Stage III.
The difference between a plain M and a Stage I is mainly a few cubic inches in the engine, disk brakes, and faster 3rd and 4th gears.
All 1952 Super Ms are Stage I. IH transitioned to Stage II in early 1953 and continued to produce them into early 1954.
Some "eggheads" (like me) will point out that the Super MTA is technically Stage III.
- BJ Moretz
- 10+ Years
- Posts: 249
- Joined: Wed Apr 20, 2011 10:34 am
- Zip Code: 28661
- Tractors Owned: IHCC Chapter 42
1985 Ford 1310
2007 MF 1533
1942 Farmall M
1970 Farmall Cub
1946 Farmall B
1200 Cub Cadet - Circle of Safety: Y
- Location: Patterson NC
Re: Value of Good runningSUPER M...wife's XMAS gift.
Thanks Matt, I was wondering too. I have a 42 M
BJ Moretz
Member Chapter 42 IHCC
1970 Farmall Cub
1533 MF
1310 Ford
1946 Farmall B
1942 Farmall M
1200 Cub Cadet
Member Chapter 42 IHCC
1970 Farmall Cub
1533 MF
1310 Ford
1946 Farmall B
1942 Farmall M
1200 Cub Cadet
-
- 10+ Years
- Posts: 602
- Joined: Wed Apr 20, 2005 6:41 am
- Location: Norwich,Ontario
- Contact:
Re: Value of Good runningSUPER M...wife's XMAS gift.
Does the stage II Super M also have an on and off switch on the dash?
IHC made a quality machine and was leader of the pack.Let's keep them running,
-
- 10+ Years
- Posts: 4948
- Joined: Tue Jun 08, 2004 3:04 pm
- Zip Code: 14559
- Circle of Safety: Y
- Location: Rochester, NY
Re: Value of Good runningSUPER M...wife's XMAS gift.
Yes, I believe that is the correct location of it. The button on my Stage II is in the electrical box (i.e. the "dash")
My Dad has a 1952 Stage I, and IIRC the original switch was on the bracket that also held the Liftall (hydraulic) rod.
My Dad has a 1952 Stage I, and IIRC the original switch was on the bracket that also held the Liftall (hydraulic) rod.
-
- 10+ Years
- Posts: 602
- Joined: Wed Apr 20, 2005 6:41 am
- Location: Norwich,Ontario
- Contact:
Re: Value of Good runningSUPER M...wife's XMAS gift.
The Super M owner pulled a dog-in-the manger trick and won't sell it.
IHC made a quality machine and was leader of the pack.Let's keep them running,
Return to “Farmall M, Super M, 400, 450, & 560”
Who is online
Users browsing this forum: farmallcubkid and 4 guests