Rebuild of the Hydraulic Remote Valve

Farmall C & Super C Tractors, 1948-1954

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.

Rebuild of the Hydraulic Remote Valve

Postby AL Farmall Boy » Thu Nov 29, 2012 5:51 pm

Would anyone happen to know how to rebuild the hydraulic remote valve as pictured below? How difficult would it be and what all parts/kits would I need? Is there one readily available? I acually pulled this off of a 1952 Farmall Super A, but this is originally used for the 2 point fast hitch found on the Farmall Super C and 200 tractors. I reckon one could use it as a hydraulic remote on the Super A/100/130/140 tractors. The PO probably pulled the TC off of a Farmall 200 or such and left the valve, as it was not hooked up. I am wanting to sell the entire set-up, but it isn't very appealing to someone when you're selling something that you're unsure of its condition and functionality. I'd like to clean, strip, rebuild, and repaint it first......that is if'n it aint too hard !!
Attachments
IMAG0920.jpg
Last edited by AL Farmall Boy on Fri Nov 30, 2012 2:18 pm, edited 1 time in total.
AL Farmall Boy
501 Club
501 Club
 
Posts: 1134
Joined: Tue Aug 10, 2010 6:38 pm
Zip Code: 35111

Re: Rebuild of the Hydraulic Remote Valve

Postby Jim Becker » Thu Nov 29, 2012 10:03 pm

That valve was available for the 100/140 tractors. The control lever/rod was different than for the Super C/200. I don't think there is much to repair in it, a seal is about all. Check the parts catalogs.

Oh yeah, the lever in your picture doesn't look like either version.
User avatar
Jim Becker
Team Cub
Team Cub
 
Posts: 11846
Joined: Sun Feb 02, 2003 3:14 pm
Location: TX/MN
Zip Code: 75048
Circle of Safety Award
Circle of Safety: Y

Re: Rebuild of the Hydraulic Remote Valve

Postby AL Farmall Boy » Fri Nov 30, 2012 9:10 am

Why would it be used on the Super A-140 tractors? For an external remote?

The lever was bolted to the steering support arm, and seemed to function well.
AL Farmall Boy
501 Club
501 Club
 
Posts: 1134
Joined: Tue Aug 10, 2010 6:38 pm
Zip Code: 35111

Re: Rebuild of the Hydraulic Remote Valve

Postby Super A » Fri Nov 30, 2012 10:19 am

It was an option on the Super A (I think it was introduced on the late model Super A's) so you could run a hydraulic cylinder on a trailing inplement.

Al
White Demo Super A Restoration Updates

Let us pray for farmers and all who prepare the soil for planting, that the seeds they sow may lead to a bountiful harvest.
User avatar
Super A
501 Club
501 Club
 
Posts: 3352
Joined: Mon Jan 26, 2004 10:53 am
Location: NC, Jacksonville area
Zip Code: 28521
Tractors Owned: 1949 Cub "The Paperweight"
Cub powered IH 52R combine
Grandfather's 1948 Super A
White demo Super A-"Ol Whitey"
1950 Super A "Old Ugly"
1954 Super A-1
856
Buncha other junk
Circle of Safety Award
Circle of Safety: Y

Re: Rebuild of the Hydraulic Remote Valve

Postby AL Farmall Boy » Fri Nov 30, 2012 2:14 pm

Ok. Well maybe it was originally on the Super A becuase it came off of a 1952 model. Neat find...and if someone has rebuilt one of these please speak up and let me know what was involved and where the parts were bought. I assume CNH is the only place to get them, but didn't know if someone provided a "kit" like that is found on eBay for steering.
AL Farmall Boy
501 Club
501 Club
 
Posts: 1134
Joined: Tue Aug 10, 2010 6:38 pm
Zip Code: 35111

Re: Rebuild of the Hydraulic Remote Valve

Postby Matt Kirsch » Mon Dec 03, 2012 2:47 pm

I think there's like one seal and one o-ring. Hardly worth making a kit.
Matt Kirsch
501 Club
501 Club
 
Posts: 3177
Joined: Tue Jun 08, 2004 3:04 pm
Location: Rochester, NY
Zip Code: 00000
Circle of Safety Award
Circle of Safety: Y

Re: Rebuild of the Hydraulic Remote Valve

Postby TWheat » Mon Dec 03, 2012 7:38 pm

Found some info on it in a IH Farmall Super A and Super AV, Operators Manual,page 81 under Special Equipment.
If you don't have access to that manual, I can scan the page and illustration and post it . No separete part #s but the # for the "Hydraulic Remote Control Tractor Attachment" is 356778R91
TWheat
Cub Star
Cub Star
 
Posts: 105
Joined: Fri Sep 02, 2011 6:22 pm
Zip Code: 33876

Re: Rebuild of the Hydraulic Remote Valve

Postby Super A » Mon Dec 03, 2012 8:05 pm

Is the TC 39C parts manual online? If so there's a parts break-down for the valve in the Hydraulic System section. Doesn't look like there's much to it. If you need I can scan my copy for you, but it'll be a few days before I will have time to.

I have never seen one on a Super A in person, people around here just didn't use any trailing implements needing hydraulics back then, at least on these tractors. It would be a neat option to have!

Al
White Demo Super A Restoration Updates

Let us pray for farmers and all who prepare the soil for planting, that the seeds they sow may lead to a bountiful harvest.
User avatar
Super A
501 Club
501 Club
 
Posts: 3352
Joined: Mon Jan 26, 2004 10:53 am
Location: NC, Jacksonville area
Zip Code: 28521
Tractors Owned: 1949 Cub "The Paperweight"
Cub powered IH 52R combine
Grandfather's 1948 Super A
White demo Super A-"Ol Whitey"
1950 Super A "Old Ugly"
1954 Super A-1
856
Buncha other junk
Circle of Safety Award
Circle of Safety: Y

Re: Rebuild of the Hydraulic Remote Valve

Postby Don McCombs » Mon Dec 03, 2012 8:13 pm

I have a copy of the Super C parts catalog that shows the breakdown. PM me you postal address and I'll mail it to you.
Don McCombs
MD, Deep Creek Lake

"1950 Something" Farmall Cub
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A
1951 Farmall Super C w/FH
User avatar
Don McCombs
Team Cub Mentor
Team Cub Mentor
 
Posts: 10365
Joined: Mon Feb 03, 2003 6:45 am
Location: MD, Deep Creek Lake
Zip Code: 21550
Tractors Owned: "1950 Something" Farmall Cub
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A
1951 Farmall Super C w/FH
Circle of Safety Award
Circle of Safety: Y

Re: Rebuild of the Hydraulic Remote Valve

Postby TWheat » Thu Dec 06, 2012 6:30 pm

There is not much new in this , and less on page 82 (not attached). It is hard to see, hope it is of some help.
Attachments
hydraulics-for-alboy.jpg
TWheat
Cub Star
Cub Star
 
Posts: 105
Joined: Fri Sep 02, 2011 6:22 pm
Zip Code: 33876

Re: Rebuild of the Hydraulic Remote Valve

Postby AL Farmall Boy » Fri Dec 07, 2012 11:32 am

Thank you so much for the info!
AL Farmall Boy
501 Club
501 Club
 
Posts: 1134
Joined: Tue Aug 10, 2010 6:38 pm
Zip Code: 35111

Re: Rebuild of the Hydraulic Remote Valve

Postby Rudi » Fri Dec 07, 2012 11:19 pm

Al was right - the TC-39B Parts Catalog is on the manual server.
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship

User avatar
Rudi
Team Cub
Team Cub
 
Posts: 28425
Joined: Sun Feb 02, 2003 8:37 pm
Location: NB Dieppe, Canada
Zip Code: E1A7J3
eBay ID: ve9rhs
Skype Name: R.H. "Rudi" Saueracker, SSM
Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1951 Cub "Jethro"
Dad's Putt-Putt
IH 129 CC
Circle of Safety Award
Circle of Safety: Y
Twitter ID: Rudi Saueracker, SSM


Return to Farmall C & Super C

Who is online

Users browsing this forum: No registered users and 1 guest