Hi all, I have a model 54 snowplow/grader blade that is missing the round rod that goes from the rockshaft down to pivot arm, would some one have one that they could measure the lenght so I can make one?, you can see the round rod in this picture from TM tractor
thanks Tim
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
grader blade question
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 5236
- Joined: Tue Jan 12, 2010 2:08 pm
- Zip Code: 12514
- Circle of Safety: Y
-
- 10+ Years
- Posts: 3562
- Joined: Thu Apr 22, 2010 2:31 pm
- Zip Code: 17953
- Tractors Owned: ......Almost enough.
N3NIK - Circle of Safety: Y
- Location: PA, Middleport (Schuylkill County)
Re: grader blade question
Tim...does this help?
http://farmallcub.com/phpBB2/viewtopic.php?f=1&t=17896
http://farmallcub.com/phpBB2/viewtopic.php?f=1&t=17896
Dave
"More gold has been mined from the thoughts of men than has been taken from the earth." -- Napoleon Hill
"More gold has been mined from the thoughts of men than has been taken from the earth." -- Napoleon Hill
-
- 10+ Years
- Posts: 821
- Joined: Wed Aug 18, 2010 3:21 pm
- Zip Code: 18036
- Tractors Owned: Presently
1949 Cub
1953 Cub
Kubota Zero turn - Circle of Safety: Y
- Location: Coopersburg, PA
Re: grader blade question
tst wrote:Hi all, I have a model 54 snowplow/grader blade that is missing the round rod that goes from the rockshaft down to pivot arm, would some one have one that they could measure the lenght so I can make one?, you can see the round rod in this picture from TM tractor
thanks Tim
Tim, I just measured mine, it is 23 inches center to center.
Bruce T.
-
- 10+ Years
- Posts: 3428
- Joined: Wed May 11, 2011 8:59 pm
- Zip Code: 39154
- Tractors Owned: 1969 Farmall Cub
1952 Cub
1942 Farmall H - Location: Raymond, MS
Re: grader blade question
Winfield Dave wrote:Tim...does this help?
http://farmallcub.com/phpBB2/viewtopic.php?f=1&t=17896
That's excellent! First time I've seen it.
Thomas
-
- 10+ Years
- Posts: 5236
- Joined: Tue Jan 12, 2010 2:08 pm
- Zip Code: 12514
- Circle of Safety: Y
Re: grader blade question
Thanks guys for the help
Tim
Tim
-
- 10+ Years
- Posts: 438
- Joined: Tue Aug 07, 2012 1:37 am
- Zip Code: 44134
- Tractors Owned: 1949 & 1951 Farmall Cubs
Several Snapper Garden Tractors - Circle of Safety: Y
- Location: Southern Suburbs of Cleveland, Ohio
Re: grader blade question
If function before fashion isn't a problem, and you plan on doing more grading work than snow removal, you may want to add a 1" piece of angle iron down the length of the rod to reinforce it from bending.
- Attachments
-
- 1353807141-picsay.jpg (48.98 KiB) Viewed 421 times
"HAVE ALL YOUR DELIVERIES MADE BY UNION DRIVERS"
-
- Similar Topics
- Replies
- Views
- Last post
-
- 10
- 429
-
by ntrenn
Thu Jun 16, 2022 9:20 pm
-
- 8
- 982
-
by ShawnAgne
Mon Jan 08, 2024 11:53 am
-
- 8
- 513
-
by IHCubCadet147
Wed Apr 10, 2024 6:35 am
-
- 4
- 395
-
by Glen
Wed Jun 07, 2023 7:40 pm
-
- 10
- 356
-
by Don McCombs
Sat Mar 18, 2023 9:37 pm
Who is online
Users browsing this forum: No registered users and 4 guests