Thu Nov 22, 2012 7:21 pm
I am trying to add more weight to the front of my loboy and was wondering if anybody has used Massey 2 piece split weights?
Do they fit ok is my main question.
I found a sample on ebay.http://www.ebay.com/itm/Massey-Ferguson-Garden-Tractor-Wheel-Weights-12-inch-fits-Deere-Cub-/190758767897?pt=LH_DefaultDomain_0&hash=item2c6a1bcd19
Thu Nov 22, 2012 8:23 pm
I don't know if they would work but it seems at that pricr you could just buy a set of cub front weights and put them on before you put the wheel on.
Thu Nov 22, 2012 8:26 pm
phildidit wrote:I don't know if they would work but it seems at that pricr you could just buy a set of cub front weights and put them on before you put the wheel on.
Thu Nov 22, 2012 8:48 pm
The ones I found are cheaper than ebay, the man says they weigh about 45lbs and pair of splits, aren't the cub weights around 30lbs each. I have a pair of cub weights on there but it just is not enough, I do a wheelly every time I go up a small hill with anything on the one point. I also give the nieces rides on the carrier and do not want it to pick up as it has before.
Just wondering if anyone out there has a set and how they fit.
Thu Nov 22, 2012 8:55 pm
They don't look like a fit. Usually 12" wheels have the same pattern, but not those.
Fri Nov 23, 2012 4:53 am
I bought a set by mistake and thought they would work but no they will not. I got lucky and a fellow in California wanted them and I made enough on them to get my real cub weights for nothing.
Sat Nov 24, 2012 8:57 am
you could add some axle weights. they are about 40lbs each. i got two on the front of one of my tractors. JP has the brackets.
Sat Nov 24, 2012 9:45 am
i have one of the origional style front axle weights , i believe it is 75 pounds , if ya want it i would be willing to part with it . then all u would need is some 330 axle clamps
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.